MICROTECH IP67 Wireless Depth Caliper

Specifications:

• Brand: MICROTECH
• Model: WIRELESS DEPTH CALIPER IP67
• Range:
  • 0-150 mm / 0-6 inch
  • 0-200 mm / 0-8 inch
  • 0-300 mm / 0-12 inch
  • 0-1000 mm / 0-40 inch
  • 0-2000 mm / 0-80 inch
  • 0-3000 mm / 0-120 inch
• Resolution: Base mm
• Accuracy: m mm
• Protection: IP67
• Display: Swiss 11 mm digit

Product Usage Instructions

Caliper Preparation:

1. Wipe the measuring surfaces with a clean cloth soaked in gasoline to remove anti-corrosion oil.
2. Insert a CR2032 battery into the caliper following the polarity markings.

Operation:

• The caliper has Autoswitch on/off function.
• Ensure measuring jaws are in contact with the object without knocking.
• Avoid warps on measuring surfaces and ensure full contact with the object.

Battery Replacement:

Follow manufacturer instructions for replacing the CR2032 battery.

Button Functions:

Use the mode button to switch between different wireless data transfer modes.

Wireless Data Transfer Modes:

The caliper supports various wireless data transfer modes for sending data to different devices.

Wireless Data Transfer Connection:

• Press the wireless module push button for 2 seconds to establish a connection.
• Follow on-screen instructions for data transfer modes and saving data to the app.

Download MICROTECH MDS App:

Visit www.microtech.tools to download the MICROTECH MDS app for various platforms.

FAQ:

• Q: How do I know when the caliper is in wireless data transfer mode?
  A: When the caliper display is blinking continuously, it indicates that it is in wireless data transfer mode.
• Q: Can the caliper be used with both Windows and iOS devices?
  A: Yes, the caliper is compatible with Windows, Android, iOS, and MacOS devices for data transfer.

MODIFICATIONS

Item No	Range		Reso- lution	Accu- racy	Base	Protection	Preset	WIRELESS	Display
	mm	inch	mm	μm	mm
1432010154	0-150	0-6”	0,01	±20	102	IP67	•	•	Swiss 11 mm digit
1432010204	0-200	0-8”		±30			•	•
1432010304	0-300	0-12”					•	•
1432010504	0-500	0-20”		±40			•	•
1432011004	0-1000	0-40”		±50	150		•	•
1432012004	0-2000	0-80”		±80			•	•
1432013004	0-3000	0-120”		±100			•	•

OPERATION INSTRUCTIONS

Wipe with a clean cloth, soaked in gasoline, measuring the surface of the frame and gauge calipers to remove anti-corrosion oil. If necessary, open the battery cover; and insert the battery (type CR2032) according to the polarity of the electrodes.
This caliper has Auto switch on/ off function:

• move the electronic module for the switch on the caliper
• after 10 minutes without any moving caliper will switch off

During the measurement, measuring jaws should to sum to the measured object without knocking.
During the measurement avoid warps of the measuring surfaces of the instrument. The measuring surface must be fully in contact with the measurement object

BATTERY REPLACEMENT

WARNING!

• IN THE PROCESS OF WORKING WITH CALIPERS SHOULD BE AVOIDED:
• Scratches on the measuring surfaces;
• Measuring the size of object in the process of machining;
• Shocks or dropping, avoid bending of rod or other surfaces

BUTTON FUNCTIONS

POWER CONSUMPTION

MODE		TRANSFER DATA
WIRELESS OFF		45 μA
WIRELESS TO MDS	STANDARD	2.0 mA
	ECO (GATT)	45-100 μA
WIRELESS HID		0.4 mA
WIRELESS HID+MAC		0.4 mA

WIRELESS DATA TRANSFER MODES

MICROTECH caliper with Built-in Wireless data output module for transfer results

WIRELESS DATA TRANSFER CONNECTION

• SWITCH ON WIRELESS module push button 2 sec;
• In WIRELESS TO MDS non-stop blinking on display up to connection to MDS app and selecting STANDARD or ECO sub-mode. ECO recomended for battery economy
• In STANDARD submode data transfer 4 times/sec and all time on display.
• Push button to save data to MDS app or use buttons and Timer inside app.
• In ECO (GATT) submode caliper ready to transfer data any time with no indication.
• Push button to save data on MDS app.
• For selecting next mode push 5 sec.
• WIRELESS HID and WIRELESS HID+MAC blinking 2 sec on display and will be ready for searching on Tablet, Smartphone or Computer Bluetooth connections.
• After succesfull connection save data to customers app with push button

DOWNLOAD MICROTECH MDS APP

Link to to Download MICROTECH MDS app for Windows, Android, iOS, MAcOS on www.microtech.tools

VIDEO MANUAL

Video manual with Connection on MICROTECH YouTube https://www.youtube.com/@Microtech-Instrumentsor by QR code scanning

Changing without prior not

Documents / Resources

MICROTECH IP67 Wireless Depth Caliper [pdf] User Manual 1432010154, 1432010204, 1432010304, 1432011004, 1432012004, 1432013004, IP67 Wireless Depth Caliper, IP67, Wireless Depth Caliper, Depth Caliper, Caliper

References

• User Manual