MICROTECH IP67 Digital Waterproof Depth Caliper
Features
MODIFICATIONS
| Item No | Range | Resolution | Accuracy | Base | Waterproof | Display | Data output | |
| mm | inch | mm | μm | mm | ||||
| 1432010153 | 0-150 | 0-6” | 0,01 | ±30 | 102 | IP-67 | Swiss Digit height 11mm | |
| 1432010154 | ±30 | 102 | IP-67 | WIRELESS | ||||
| 1432010203 | 0-200 | 0-8” | ±30 | 102 | IP-67 | |||
| 1432010204 | ±30 | 102 | IP-67 | WIRELESS | ||||
| 1432010303 | 0-300 | 0-12” | ±30 | 102 | IP-67 | |||
| 1432010304 | ±30 | 102 | IP-67 | WIRELESS | ||||
OPERATION INSTRUCTIONS
Wipe with a clean cloth, soaked in gasoline, measuring surface of the frame and gauge calipers to remove anti-corrosion oil. Then wipe them with a clean dry cloth.
If necessary, open the battery cover; insert the battery (type CR2032) according to the polarity of the electrodes. Blinking display information or absence suggests replacing battery.
This depth caliper has Autoswitch on/ off function:
- move electronic module for switch on caliper
- after 10 minutes without any moving caliper will switch off During the measurement avoid warps of measuring surfaces of the instrument. Measuring surface must be fully in contact with the measurement object.
WARNING!
IN THE PROCESS OF WORKING WITH CALIPERS SHOULD BE AVOIDED:
Scratches on the measuring surfaces; Measuring the size of object in the process of machining; Shocks or dropping, avoid bending of rod or other surfaces.
Calibration ISO 17025:2017
ISO 9001:2015
Documents / Resources
 |
MICROTECH IP67 Digital Waterproof Depth Caliper [pdf] User Manual IP67 Digital Waterproof Depth Caliper, IP67, Digital Waterproof Depth Caliper, Waterproof Depth Caliper, Depth Caliper |
