COMPUTERIZED HEIGHT GAUGE
USER MANUAL
SPECIFICATION
TECHNICAL DATA
|
Parameters |
|
| LED display |
color 2,4 inch 320×240 |
|
Indication system |
MICS 4.0 |
| Power supply |
Rechargeable Li-Pol battery 500 mAh |
|
Charging port |
micro-USB |
| Case material |
Aluminium |
|
Wireless data transfer |
Long range / HID |
| USB data transfer |
USB HID |
MAIN INFO
SWITCH ON DEVICE – button push (1 sec)
SWITCH OFF DEVICE – button push (3 sec)/ auto switch off
DATA TRANSFER – programming throw menu
BUILT-IN BATTERY – rechargeable Li-Pol battery
DOWNLOAD APP
DOWNLOAD MDS APP FOR MICROTECH DEVICES WIRELESS CONNECTION FROM www.microtech.ua, GooglePlay & App Store
DATA TRANSFER
3 MODES OF DATA TRANSFER (USB + 2 WIRELESS MODES)
WIRELESS CONNECTION TO MDS APP
WIRELESS data transfer to MICROTECH MDS app for Windows, Android, iOS
WIRELESS HID and USB HID data transfer (like keyboard) direct to any customers app and system
[a]
SAVING DATA TO XLS. CSV FORMATS
TRANSFER DATA TO CAD, SPC OR OTHER SOFTWARE
TRANSFER DATA TO EXCEL OR OTHER TABLE EDITORS
SAVING GRAPH
FREE SOFTWARE
NO DONGLE
[b]
TRANSFER DATA TO CAD, SPC OR OTHER SOFTWARE
TRANSFER DATA TO EXCEL OR OTHER TABLE EDITORS
TRANSFER DATA TO ANY BROWSWE OR APP
WIRELESS HID CONNECTION
USB HID CONNECTION
NO DONGLE
7 WAYS HOW TO TRANSFER DATA TO PC OR TABLET
- TOUCHSCREEN TAP
- BUTTON PUSH
- SELECTED FORCE
- BY TIMER
- FROM MEMORY
- IN MDS APP
- FROM PAIRED DEVICE
MAIN SCREEN
[a] LAST VALUE
[b] ON-LINE
GRAPHIC MODE
[c] CONNECTION STATUS
WIRELESS DISCONNECTED
WIRELESS CONNECTED
WIRELESS HID CONNECTED
USB HID DISCONNECTED
USB HID CONNECTED
[d] ANALOG SCALE
[e] MEMORY
STANDARD or FOLDER system can be activated throw MEMORY menu
For save measuring data to internal device memory touch data area on screen or button push. You can view saved data or send by WIRELESS or USB connection to Windows PC, Android or iOS
It’s possible to use Standard or Folders memory modes
FOLDERS SYSTEM MEMORY 2000 val. MEMORY EXPORT STATISTIC
[f]
MAIN SCREEN on 2D mode
- 2D and HUB MODE
PROBE -Saving data when Probe will reach value
PROBE Auto – Saving data when Probe will reach value with this value compensation
2D – 2 axis data reading
2D Sync– Synchronized2 axis data reading - ON-LINE
GRAPHIC MODE - ANALOG SCALE
FOR PROBE MODE
FUNCTIONS
LIMITS mode GO/NOGO
COLOR INDICATION LIMITS ON MAIN SCREEN Go NoGo
- MAX – NoGo more Upper limit
MIN – NoGo less Lower limit
RANGE – Go between Limits
NONE – Analog scale active - Upper limit
- Lower limit
- Yellow zone on analog scale
PEAK mode MAX/MIN
INDICATION AND SAVING MAX OR MIN VALUES
- DISABLE– non active mode
ENABLE – activating mode
REFRESH – refresh peal value according timer - MAX – indicating MAX measured value
MIN – indicating MIN measured value
TIMER mode
SAVING DATA TO MEMORY OR SENDING WIRELESS/USB BY TIMER
- Select timer period
- Reset to disactivate mode
FORMULA mode
- Select FORMULA Type (Math, Radius or other)
- Select arguments
RESOLUTION selection
- Resolution selecting
- mm/inch conversion
DISPLAY settings
- Sleep OFF (15 s low brightness off, sleep off)
Sleep 15s (15 s low brightness on, sleep off)
Sleep ON (15 s low brightness on, sleep on) - Display rotation 0°, 90°, 180°, 270°
- Brightness level
LINEAR error compensation
Linear correction error’s on device
Re-calculation detail size to calibration conditions (20°C)
- actual values
- correct values by up&down button
- confirm point correction
TEMP compensation
- Manual Temperature setting
- 4 types of material for selection:
– Glass, Quartz
– Stainless steel
– Cuprum and alloys
– Alluminium and alloys
WIRELESS data transfer
- Wireless power regulation
- Reconnection button
- ON – WIRELESS data transfer to MDS App for Android, iOS, Windows
HID– WIRELESS HID direct transfer data to any App in Windows, MacOS, Linux, Android devices (like keyboard). Configure data format in USB sub-menu
2D-S – Slave device on WIRELESS connection on HUB mode
2D-M – Master device on WIRELESS connection on HUB mode
USB OTG data transfer
- Connect USB cable to PC & Activate USB HID connection mode
Select setting of data transfer
Direct transfer data to any App in Windows, MacOS, Linux, Android devices
Configurating data transfer Dot/Comma and Tab/Arrow Down/CR+LF
HUB connection
PROBE MODE
- External Wireless device connection
- Axis priority selecting
- Setting PROBE limit value
- PROBE -Saving data when Probe will reach value
PROBE Auto – Saving data when Probe will reach value with this value compensation
2D – 2 axis data reading
2D Sync– Synchronized2 axis data reading
Disable – switch off modes - A.C.on – Auto Connection active
A.C.off – Auto Connection no active
2D MODE
- External Wireless device connection
- Symbol between Axis
- Graphic mode indication setting
- PROBE -Saving data when Probe will reach value
PROBE Auto – Saving data when Probe will reach value with this value compensation
2D – 2 axis data reading
2D Sync– Synchronized2 axis data reading
Disable – switch off modes - A.C.on – Auto Connection active
A.C.off – Auto Connection no active
LINK to app’s
QR Link to MICROTECH web site page with MDS Software download
– Android, iOS, Windows versions
– Free and Pro versions
– Manuals
RESET to Factory settings
- Push 10 times to RESET device to factory settings
- Push 10 times to FIRMWARE UPDATE
EXTRA
- Selecting normal or inverted axis mode (+/- value indication)
- Сoefficient setting (for distributor and calibration only)
MEMORY manager setting
- Values in each Folder
Activating STANDARD or FOLDER SYSTEM
FOLDERS SYSTEM
CALIBRATION date info
- Push for change calibration date info
Device INFO
Information about device
– Firmware version
– MAC adress for WIRELESS connection
INDUSTRY 4.0 INSTRUMENTS
Change without prior notice
MICROTECH
innovative measuring instruments
61001, Kharkiv, Ukraine, str. Rustaveli, 39
tel.: +38 (057) 739-03-50
www.microtech.ua
tool@microtech.ua
Documents / Resources
 |
MICROTECH 1443030262 COMPUTERIZED HEIGHT GAUGE [pdf] User Manual 1443030262 COMPUTERIZED HEIGHT GAUGE, 1443030262, COMPUTERIZED HEIGHT GAUGE, HEIGHT GAUGE |
