User Guide
MS-SP10
USB Omnidirectional Smart
Conference Speaker Phone
MS-SP10 USB Omnidirectional Smart Conference Speaker Phone
Notices
- This MSolutions product contains electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc. Use of surge protection is highly recommended in order to protect and extend the life of your equipment.
- The transmission distances of HDMI over CAT cables are measured using TE CONNECTIVITY 1427071-6 EIA/ TIA-568-B termination (T568B) of cables is recommended for optimal performance. To minimise interference of unshielded twisted pairs in the CAT5e/6 cable, do not run the HDBaseT / CAT5e/6/6a cabling with or in close parallel proximity to mains power cables.
- Do not substitute or use any other power supply other than the enclosed unit, or an MSolutions approved replacement. Do not disassemble either the Transmitter or Receiver units for any reason. Doing so will void the manufacturer’s warranty.
- MSolutions reserves the right to change the specifications of this unit without prior notice. As a result of this, physical representations or graphical elements contained within this user guide may not be accurate.
Packing List
Appearance
Light Indicator
| Light Indicator | Device Status |
| Green | Microphone is working |
| Red | Microphone is muted |
| Orange | Booting up/Upgrading firmware |
| Clockwise Rotation | Connecting to the computer USB port |
| Counterclockwise Rotation | Disconnecting to the computer USB port |
Connection
A. Connect Computer
B. Connect Extension Microphone
Conference Room View
www.m4sol.com
support@m4sol.com
Documents / Resources
 |
Media Solutions MS-SP10 USB Omnidirectional Smart Conference Speaker Phone [pdf] User Guide MS-SP10 USB Omnidirectional Smart Conference Speaker Phone, MS-SP10, USB Omnidirectional Smart Conference Speaker Phone, Smart Conference Speaker Phone, Conference Speaker Phone, Speaker Phone, Phone |