MEAN WELL EPS-45 Series 45W Single Output Switching Power Supply Owner's Manual

EPS-45 series
45W Single Output Switching Power Supply

Contents hide

1 Features:

2 GTIN CODE

3 SPECIFICATION

4 Mechanical Specification

5 Block Diagram

6 Output Derating

7 Static Characteristics

8 Documents / Resources

8.1 References

9 Related Posts

Features:

Universal AC input / Full range
Optional L-Bracket and cover

High efficiency up to 90%
Protections: Short circuit / Overload / Over voltage

Cooling by free air convection
4″x2″ compact size

LED indicator for power on
No load power consumption<0.3W

Operating altitude up to 4000 meters
3 years warranty

https://www.meanwell.com/Upload/PDF/PCB_EN.pdf

GTIN CODE

MW Search: https://www.meanwell.comIserviceGTIN.aspx
EPS-45-3.3 -C =Blank.-C . Blank=PCB only. -C=Enclosed type

SPECIFICATION

MODEL		EPS-45-3.❑	EPS-45-5❑	EPS-45-7.5❑	EPS-45-12❑	EPS-45-15❑	EPS-45-24❑	EPS-45-36❑	EPS-45-48❑
OUTPUT	DC VOLTAGE	3.3V	5V	7.5V	12V	15V	21V	36V	48V
	RATED CURRENT	8A	BA	5.4A	3.75A	3A	1.9A	1.25A	IA
	CURRENT RANGE	0 -9A	0 -9A	0 -6A	0-42A	0 – 3.3A	0-2.1A	0-IAA	0-1.1A
	RATED POWER	26.4W	40W	40. 5W	45W	45W	45.6W	45W	48W
	PEAK LOAD(10sec.) Note.6	29.7W	45W	42W	50.4W	49.5W	50.4W	50AW	52.8W
	RIPPLE & NOISE (max.) Note.2	80mVp-p	80mVpp	100mVp-p	120mVp-p	150mVp-p	240mVp-p	280mVp-p	300mVp-p
	VOLTAGE ADJ. RANGE	3.1 – 3.6V	4.75 – 5.5V	7.13-825V	10.8 – 13.5V	13.5 – 16.5V	21.6 – 2N	32.4 – 39.6V	43.2 – 521V
	VOLTAGE TOLERANCE Note.3	±3.0%	±2.0%	±2.0%	±2.0%	±2.0%	±1.0%	±1.0%	±1.0%
	LINE REGULATION	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±13.5%
	LOAD REGULATION	±2.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
	SETUP, RISE TIME	1000ms. 5Orns1230VAC 2000ms. 50ms/115VAC at full load
	HOLD UP TIME (Typ.)	50ms230VAC lEms/115VAC at full load
INPUT	VOLTAGE RANGE Nole.5	90 ~ 264VAC 127 ~ 370VDC [DC input operation possible by connecting AC/N(+), AC/L(-)]
	FREQUENCY RANGE	47 -63Hz
	EFFICIENCY (Typ.)	80%	182%	184%	187%	188%	189%	189%	190%
	AC CURRENT (Typ.)	1.8A/115VAC I A/230VAC
	INRUSH CURRENT (Typ.)	COLD START 60A/230VAC
	LEAKAGE CURRENT	<2mA/240VAC
PROTECTION	OVER LOAD	115 – 160% rated output pow
	OVER LOAD	Protection type : Hiccup mode. recovers atamatically after fall condition is removed
	OVER VOLTAGE	3.7 ∼ 4.45V	5.6 ∼ 6.75V	8.63 ∼ 10.1V	13.8 ∼ I6.2V	17.25 ∼ 20.25V	27.6 ∼ 32.4V	39.7 ∼ 46.8V	53.3 ∼ 64.8V
	OVER VOLTAGE	Protection type : Shut down oip voltage. re-power on to recover
EIMRIMMENT	WORKING TEMP.	-30 – +70°C (Refer lo output load derating curve)
	WORKING HUMIDITY	20 – 93% RH non-condensing
	STORAGE TEMP.. HUMIDITY	40∼ +85°C. 10∼ 95% RH
	TEMP. COEFFICIENT	±0.03%/°C (0 – 50°C)
	OPERATING ALTITUDE Note.7	4000 meters
	VIBRATION	10 – 500Hz. 2G 10min./1cycle. period for 60min. each along X. Y. Z axes
SAFETY & EMC (Note 4)	SAFETY STANDARDS	UL62368-1. 11.IV BS EN/EN623138-1. EAC TP TC 004 approved
	WITHSTAND VOLTAGE	UP-O;P:3KVAC IIP.FO2KVAC OP-FG:0.5KVAC
	ISOLATION RESISTANCE	VP-0/P. I/P-FG. 0/12-FG:100M Ohms / 500VDC/25°C/ 70% RH
	EMC EMISSION	Compliance to BS EN/EN55032 (CISPR32) Class B. BS EN/EN81000-3-2.-3. EAC TP TC 020
	EMC IMMUNITY	Compliance to BS EPPEN61000-4-2.3.4.5.6.8.11. BS EN/BMWS. heavy industry level. EAC TP TC 020
OTHERS	MTBF	2981.8K hrs min. Telo:rdia SR-332 (Bellcore): 652.4K hrs me. MIL-HDBK-217F (25°C)
	DIMENSION	PCB:101.650.819mm (LWH); with optional CASE:103.41217mm (LWH)
	PACKING	PCB: 0.14Kg: Repos/ 14.5Kg/1.39CUFT; with optional CASE: 0.3Kg:45pcsl 14.5Kg0.63CUFT
NOTE	1. Al parameters NOT specially watered are meastrei at 230VAC input rated Iced and 25°C of amtient temperate. 2. Ripple & noise are neared at 20MHz of teniwiti by using a 12″ Misted pay/rare terminated with a 0.1ul& 47uf parallel capacitor. 3. Tolerance: imlutos set up taance. Ire regulation and load regulation 4. Dwatig may be needed under low iput voltage. Please check the static characteristics for more Maas. 5. 33% Cuty cycle mamun vain every 30 saccade, Average MN poser should not exceed the rated pear. 6. The poser suppty is ccrisklerei a component which MI be Metaled irto a RS equipment Al the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate wit 1mm cf thickness. The final equiprnent must be re-ccritmed that it still meets EMC directives. For guidance on how to perkan these EMC tests. please refer to “EMI testirg d ccrrponent pow swims.” (as amide on http://www.meanwell.com) 7. The ambient temperate deratig of 3.5°C /1000m with fatless models and of 5°C/1000m with fan models for operafrg allude higher than 2000m(6500ft). Product lately Cisclaimer : For detailed irdormatin please refer to https://www.meanwell.com/serviceDisclaimer.aspx

Mechanical Specification

Block Diagram

Output Derating

Static Characteristics

File Name:EPS-45-SPEC 2022-09-20
Downloaded from Arrow.com.

Documents / Resources

	MEAN WELL EPS-45 Series 45W Single Output Switching Power Supply [pdf] Owner's Manual EPS-45 Series 45W Single Output Switching Power Supply, EPS-45 Series, 45W Single Output Switching Power Supply, Output Switching Power Supply, Switching Power Supply, Power Supply
	MEAN WELL EPS-45 Series 45W Single Output Switching Power Supply [pdf] Owner's Manual EPS-45-24, EPS-45 Series 45W Single Output Switching Power Supply, EPS-45 Series, EPS-45 Series Power Supply, 45W Single Output Switching Power Supply, 45W Power Supply, Single Output Switching Power Supply, Switching Power Supply, Single Output Power Supply, Power Supply
	MEAN WELL EPS-45 Series 45W Single Output Switching Power Supply [pdf] Owner's Manual EPS-45-12, EPS-45 Series 45W Single Output Switching Power Supply, EPS-45 Series, 45W Single Output Switching Power Supply, Output Switching Power Supply, Switching Power Supply

References

User Manual