ARD-3-63-ISL
Three-phase connection unit with auto rest isolator suitable
for 3 x 63A SP loads
E ARD-3-63-ISL Three Phase Connection Unit
The matt:e ARD connection centres provide a simple to install dedicated EV connection centre, with built in O-PEN® technology, that allows for the connection of EV charge points to the PME earthing facility without the use of earth electrodes. Helping to facilitate compliance with BS:7671. 2018 Amendment 1, 2020 Regulation 722.411.4.1.(iii). The matt:e ARD connection centres incorporate the unique 5 pole auto reset device that automatically restores power to the load once the fault has cleared.
Product Features and benefits
- Built in O-PEN® technology
- NO EARTH ELECTRODES REQUIRED
- Helps reduce disruptive and costly groundworks
- Removes the risk of striking buried services
- Simple wire in wire out connection
- Phase loss protection
- For 3 x 63A single-phase loads
- Mild steel IP4X enclosure
- Standard 1 Year parts warranty.
Specifications
| Input Volts | 400V 50Hz |
| Max Load | 63amps |
| Cable Entry Facility | Top and bottom |
| Terminal Capacity | 25mm2 |
| Dimensions (HxWxD) | 380mm x 300mm x 120mm |
| Weight | Approximately 7kG |
| Enclosure | Mild Steel Powder Coated |
| Ingress Protection | IP4X |
| Warranty | 1 Year |
…Simplifying EV connection
T: 01543 227290
E: info@matt-e.co.uk
W: www.matt-e.co.uk
matt:e Ltd, Unit 5 Common Barn Farm Tamworth Road Lichfield WS14 9PX
Documents / Resources
 |
matt E ARD-3-63-ISL Three Phase Connection Unit [pdf] Owner's Manual ARD-3-63-ISL Three Phase Connection Unit, ARD-3-63-ISL, Three Phase Connection Unit, Phase Connection Unit, Connection Unit |