matt E ARD-2-40-TP-R-SPD Connecton Unit With Auto Reset
PRODUCT INFORMATION
The matt:e ARD connection centres with unique 5 pole auto reset device and built in Type 2 SPD. Simple to install, dedicated EV connection centres with built in O-PEN® technology that allows for the connection of EV charge points to the PME earthing facility without the use of earth electrodes. Helping to facilitate compliance with BS:7671. 2018 Amendment 2, 2022 Regulation 722.411.4.1.(iii).
Product Features and Benefits
- Built in O-PEN® technology
- NO EARTH ELECTRODES REQUIRED
- Helps reduce disruptive and costly groundworks
- Removes the risk of striking buried services
- Simple wire in wire out connection
- Complete with Type 2 SPD
- With 2 x built in 40A TPN Type A RCBO
- Mild steel IP4X enclosure
- Standard 1 Year parts warranty.
Specification
| Input Volts | 400V 50Hz |
| Max Load | 80amps |
| Cable Entry Facility | Top and bottom |
| Terminal Capacity | 25mm2 |
| Dimensions ( H x W x D ) | 550mm x 360mm x 120mm |
| Weight | Approximately 7kG |
| Enclosure | Mild Steel Powder Coated |
| Ingress Protection | IP4X |
| Warranty | 1 Year |
FAQs
- Q: Can this product be used for single-phase connections?
- A: No, this product is specifically designed for three-phase connections.
- Q: Is professional installation recommended for this product?
- A: Yes, it is recommended to have the unit installed by a qualified electrician to ensure safety and compliance.
CONTACT INFORMATION
- T: 01543 227290
- E: info@matt-e.co.uk
- W: www.matt-e.co.uk
- matt:e Ltd, Unit 1 Langley Brook Business Park,
- Middleton, Tamworth B78 2BP
Three-phase connection unit with auto rest isolator, Type 2 SPD, and 2 x 40A TPN Type A RCBO
Documents / Resources
 |
matt E ARD-2-40-TP-R-SPD Connecton Unit With Auto Reset [pdf] Owner's Manual ARD-2-40-TP-R-SPD Connecton Unit With Auto Reset, ARD-2-40-TP-R-SPD, Connecton Unit With Auto Reset, Unit With Auto Reset, Auto Reset |