MATT BLATT MBTYSONSDBA Tyson Sideboard
COMPONENTS
Hardware
ASSEMBLY
Step 1: Align the holes on the supporting beam (3) with those on the legs (2). Over one aligned hole, place a washer (6) over top, then using the Allen key (7), secure a 12mm M6 screw (5) through the washer (6) into the leg (2). Repeat with the other hole.
Step 2: Align the holes on the legs (2) with those on the bottom of the sideboard body (1). Over one aligned hole, place a washer (6) over top, then using the Allen key (7), secure a 16mm M6 screw (4) through the washer (6) into the sideboard body (1). Repeat with the remaining holes.
NEED MORE INFORMATION?
We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.mattblatt.com.au
Documents / Resources
 |
MATT BLATT MBTYSONSDBA Tyson Sideboard [pdf] User Guide MBTYSONSDBA Tyson Sideboard, MBTYSONSDBA, Tyson Sideboard, Sideboard |
