Matrix ICR50
IX Display & LCD Console Guide 
IX Display
The high-definition, 22-inch IX Display completes the immersive experience when you mirror your smartphone, tablet, or digital media player to stream live and on-demand classes, virtual courses, or your favorite entertainment.
Important: This is NOT a console. This is simply a monitor to mirror a device.
Connecting a Device
Connect an HDMI-to-HDMI cable to the display (not included). Then, use a HDMI to USB-C or Lightning cable (cables not included) to connect a device to the open end of the HDMI cable to mirror your device on the 22″ LED screen.
Display Controls
The controls are located on the back of the display. 
Using Zwift
You can download Zwift on your device and mirror it on the display.
Setup video: https://youtu.be/0VbuIGR_w5Q
Cleaning the Display
Use a micro-fiber cloth and LCD screen cleaner to clean your display as needed. If you do not have a screen cleaner, use a damp (with water) micro-fiber cloth instead.
LCD Console
The LCD console can be purchased and used with the ICR50 cycle. An RF sensor that comes with the console will need to be installed in the frame.
Console Overview
Use the console buttons to navigate through the console. 
A. WORKOUT TRACK
- Solid = In-progress RPM workout
- Blinking = Goal to achieve (Program 2 only)
B. TARGET / RPM - Program 1: Resistance target level
- Program 2: Current RPM
- Program 3: HR target
C. WORKOUT PROGRAMS - Select by pressing at standby page
D. DISTANCE
E. CALORIES / SPEED - Press to switch
F. HEART RATE
G. WORKOUT TIME
H. GOAL ACHIEVEMENT - Light will illuminate once goal is achieved
I. WIRELESS HEART RATE CONNECTION
J. WORKOUT DATA - To see AVG & MAX workout data, press: to pause to switch calories / speed to switch AVG /
MAX
K. BATTERY - Indicates 100% or less, 70% or less, 40% or less, and 10% or less
Console Setup
- Install the console bracket onto the handlebar, then slide the foam sheet between the handlebar and console bracket.
- Install 4 AA batteries into the console.
- Attach the console to the console bracket using 2 screws.
- Remove the 4 screws and the handlebar adjustment knob from the frame, then remove the plastic cover.
- Plug the unused wire into the RF Sensor.
- Using the Velcro, mount the RF Sensor to the Main Frame.
- Reinstall the plastic cover and handlebar adjustment knob.
Machine Settings
You may adjust settings to customize the console.
Press and hold
and
for 3 to 5 seconds to enter Machine Settings. The console will display “SET” when ready.
| Model Selection | Brightness Setting | Unit Setting |
| 1. Press once to enter the Model Selection page. |
1. Press twice to enter the BL page. |
1. Press three times to enter the Unit page. |
2. Press  to select the frame model. |
2. Press to adjust the brightness |
2. Press to scroll to Miles or KM. |
| 3. Press to select and set the frame model. |
3. Press to set the selected brightness. |
3. With your selection shown, press to save and set. |
Cleaning the Console
Use a micro-fiber cloth and LCD screen cleaner to clean the console screen as needed. If you do not have a screen cleaner, use a damp (with water) micro-fiber cloth instead.
Useful Resources
At the link destination below, you will find information on product registration, warranties, FAQs, troubleshooting, setup/connectivity videos, and available software updates for consoles. Matrix Fitness – https://www.matrixfitness.com/us/eng/home/support
Customer Technical Support – Please refer to your Owner’s Manual for warranty terms
Warranty Product
| Brand | Phone | |
| Matrix | 800-335-4348 | info@johnsonfit.com |
Out-of-Warranty Product
| Brand | Phone | |
| Matrix & Vision | 888-993-3199 | visionparts@johnsonfit.com |
6 | Version 1 | January 2022
Table of Contents
Documents / Resources
 |
MATRIX ICR50 IX Display and LCD Console [pdf] Installation Guide ICR50 IX Display and LCD Console, ICR50, IX Display and LCD Console, LCD Console, Console |