Digital Microscope MX2-A
Product Descri
Thank you for choosing the MatataStudio Digital Microscope MX2-A. This high-performance, multifunctional device seamlessly integrates optical microscopy with digital imaging, delivering high-definition images and videos for precise observation and recording.
Important Information
- Read instructions carefully and use the microscope properly.
- Protect the objective.
- Avoid excessive force when docking
- Place specimens directly under the objective center for a clear view.
- This product is compatible with the MX Stand. When used together, it can observe flowers, insects, and other physical samples, as wel as siide specimens.
Microscope components and use
Microscope component
Usage environment
 |
Useinanenvironment of 10C~45C |
 |
Pleasedonotallow woter, beveragesor corosiveliquidsget the microscope wet |
 |
Please donot allow the microscopetocomecloseto heat sources,open flames, or flammable/ combustible liquids or gases |
 |
Pleasedonotallow dusttoenterthe lensor interiorof the microscope |
 |
Pleasedonot allow the microscope tobestruck orviolently shaken |
Inlow temperatures, battery capacity may decline. Inthe event of malfunction, please contact customer service for repairs. Disassembling the microscope on one’s own violates the warranty and may lead torreparable damage.
– When powered off, the red light stays on while charging.
-Whenin use, both red and bluelights are on while charging.
Using the microscope
Before using the microscope, make sure you are holding it securely orisplaced onatable.
Finddetailed instructionsat
https://www.matatastudio.com
Steps for use
- Hold the top of the microscope tube in one hand.
- Turn on the microscope.
- Point the microscope at the object you wish to observe.
- Turn the zoom ring and focus ring with your other hand, looking at the display on the screen. Slowly adjust to the best magnification
Adjust microscope magnification
Turn the zoom ring counterclockwise to magnify or clockwise to minify.
Using the app
Scan the QR code or follow thelinkt o download theapp
(https://www.matatastudio.com/software.html)
Android /i0S devices
-Open your device and turn on Wifi Inthe settings turn on Wii.
-Connect the microscope to the Android /iOS device Clickthe Connect Wii button on the APP to enter the WiFi settings page, select the WiFi corresponding to the microscope WiFi signal name (MX2-XXXXXXX) and connect. Return to the main interface in the app and wait for the”Start Observation’ textto be displayed.
Note:Ifa connection notification appears,tap ‘maintain connection® (Android) or tap“OK’; When connecting theapp tothe microscope, pleaseallow location permission on your phone/ tablet.
-Startobservation
Afterclicking to start observation, you will enter the real-time image preview page, where you can control the microscope to take photos, record videos.
PC
-Connect datacable
Plug one end of the microscope USBdata cableinto the computer USB port, and theother end into the microscope USB-Cinterface. At this time, the microscope willdisplay 3options (memory.camera, charging).Select the “camera’ option and confirm.
-UsingonaPC
Afterconnecting to the computer, it willtake -3seconds to automatically installthe diver, thenopen MatatoXplore, and you canview theimages n real imen the computerand theimages
Specifications
| Product name | Intelligent microscope |
| Product model | MX2-A |
| Sensor resolution | 1980(H)x1080(W) |
| Pixel specifications | 2MP |
| Objective | 0.5-4x |
| Screen magnification | 9-72x |
| Screen size | 4.3″ HD LCD screen |
Parts list
Safety instructions
*This product is not intended for use by children under the age of three.
*The power adapter (not included in the box) is not a toy. Keep it out of the reach of children.
*This product shall only be used with a transformer for toys
*Disconnect the product from the power supply before cleaning. Clean the product with a dry, fiber-free cloth.
*Children should play the product under the guidance of an adult.
*Falling even from a low height can damage the product.
*Never rebuild and/or modify this product to avoid malfunctioning.
*Do not use or charge the product in temperatures outside its operating range.
“If this product is not to be used for a long period of time, fully charge it before storage and recharge it at least once every three months.
*Use only a recommended power adapter (5V/2A) to charge the product.
*Regularly check whether the cable, plug, shell or other components are damaged. If damaged, stop using immediately.
CAUTION
Risk of explosion if batteries are replaced by an incorrect type. Return the used batteries according to the relevant statutory regulations.
Warranty terms
*Product warranty period is 1 year
*The following situations are not covered by free warranty:
a. Unable to present this warranty certificate and valid invoice
b. This warranty certificate contains traces of alteration or is inconsistent with the product
c. Natural consumption/wear and aging of consumable materials
d. Damage caused by lightning strikes or other electrical system reasons
e. Damage caused by improper use by users, such as liquid injection/external force damage, etc.
f. Damage caused by force majeure factors such as accidents/disasters
g. Products that have been disassembled/modified/repaired by yourself
h. Damage caused by exceeding the warranty period or not using/maintaining/storing the product in accordance with the product instructions
This device complies with the essential requirements and other relevant provisions of the Low Voltage Directive 2014/35/EU, the EMC Directive 2014/30/EU, the Eco-Design Directive 2009/125/EC and the ROHS Directive 2011/65/EU.
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT(WEEE)
The WEEE marking indicates that this product should not be disposed with regular household waste at the end of its life cycle. This regulation is created to prevent any possible harm to the environment or human health.
This product is developed and manufactured with high quality materials and components which can be recycled and/or reused. Please dispose this product at your local collection point or recycling centre for electrical and electronic waste. This will make sure that it will be recycled on an environmentally friendly manner, and will help to protect the environment in which we all live.
This user guide contains important information, please keep it!
FCC Cautiony
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation Any Changes or modifications not expressly approved by the party responsible for ‘compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limis for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residentialinstallation This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmiul interference toradio communications. However, there is no guarantee that interference will not occur in a particular instalation.Ifthis equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user s encouraged to ty to correct the interference by one or more of the. following measures
-Reoriert or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipmentinto an utlet on a circuit diferent from that to which the receiveris connected
-Consultthe dealer or an experienced radiofTV technician for help.
The device has been evaluated to meet general RF exposure requirement The device can be used i portable exposure condition without restrction
Designed by
MATATALAB CO. LTD. in China
Documents / Resources
 |
MATATALAB MX2-A Digital Microscope [pdf] User Guide 2APCM-MX2-A, 2APCMMX2A, mx2 a, MX2-A Digital Microscope, MX2-A, Digital Microscope, Microscope |