MARS MS 2002A Digital Clamp Meter Open Jaw Electrical
Product Information
Measuring Meters
MARS MS 2002A 3 3/4 Digital Clamp Meter (Auto Range)
Technical Specifications:
- DCV
- ACV
- ACA
- OHM
- Clamp size
- Dimension
- Weight
- Battery
MARS MS 2600 3 1/2 Digital Open Jaw Electrical Tester
Technical Specifications:
- DCV
- ACV
- ACA
- OHM
- CAP
- Frequency
- Duty Cycle
- Dimension
- Weight
- Battery
Vernier Calipers
The Vernier Calipers come in multiple models with different measurement ranges.
- 200-118 (General 0~200×0.02mm)
- 200-646 (With Mechanical Meter 0~150×0.02mm)
- 200-647 (With Mechanical Meter 0~200×0.02mm)
- 200-196 (With Mechanical Meter 0~200×0.02mm)
- 200-197 (With Mechanical Meter 0~200×0.02mm)
Digital Micrometer
The Digital Micrometer is available in various models with different precision levels.
- 200-521 (With Mechanical Meter 0~200×0.02mm)
- (With Digital Meter 0~25×0.001mm)
- (With Digital Meter 0~150×0.01mm)
- (With Digital Meter 0~200×0.01mm)
Mars reserves the right to alter Design/Specification of any instruments without prior notice or information for the betterment of the product.
Mars EdPal Instruments Pvt. Ltd.
- Website: www.marsedpal.com
- Email: info@marsedpal.com
Product Usage Instructions
Measuring Meters:
Vernier Calipers:
Digital Micrometer:
FAQs
Q: Can I use the clamp meter for measuring both AC and DC currents?
A: Yes, the clamp meter can measure both AC and DC currents.
Q: What is the battery type used in the digital open jaw electrical tester?
A: The digital open jaw electrical tester uses [insert battery type].
MEASURING METERS
3 3/4 Digital Clamp Meter (Auto Range)
MS 2002AMS 2002A
Features
- 3 ¾ Digits LCD with 42-segements bar graph, max. reading 3999
- SMT application
- Auto/ Manual range
- Data hold & LCD backlighting
- Low battery indication
- Audible continuity
- Over load protection
Technical Specifications
- DCV : 400/600V, ± 1.0%
- ACV : 400/600V, ± 1.5%
- ACA : 40/400A, ± 2.0%
- OHM : 400ohms, ± 1.0%
- Clamp size : 28mm (max.)
- Dimension : 194 x 72 x 35 mm
- Weight : 200gm Approx.
- Battery : 1.5V x 2, AAA size
3 /1/2 Digital Open Jaw Electrical Tester
MS 2600
Features:
- New open-jaw technology for AC current measurement, easy to operate
- Test leads can be inserted on back groove of the tester
- Versatility of use with capacitance, frequency and duty cycle measurement
- 3 ¾ Digits LCD display
- Auto/ Manual range
- Data hold & LCD backlit
- Auto power-off
Technical Specifications
- DCV : 4/40/400/1000V, ± 0.7%
- ACV : 4/40/400/750V, ± 0.8%
- ACA : 200A, ± 2.0% (50Hz~1000Hz)
- OHM : 400W/4K/40K/400K/4M/40MW ± 1.2%
- CAP : 40n/400n/4mF/40mF, ± 4.0%
- Frequency : 10Hz~100KHz, ± 2.0%
- Duty Cycle : 0.1%~99.9%
- Dimension : 192 x 168 x 43 mm
- Weight : approx. 230gm
- Battery : 9V x 1, 6F22
Vernier Calipers 
Digital Micrometer
200-521
(With Digital Meter 0~25×0.001mm) 
Mars reserves the right to alter Design/Specification of any instruments without prior notice or information for betterment of the product
Mars Edpal Instruments pvt,Ltd,
website : www.marsedpal.com
email: info@marsedpal.com
Documents / Resources
 |
MARS MS 2002A Digital Clamp Meter Open Jaw Electrical [pdf] Owner's Manual MS 2002A, MS 2600, 200-118, 200-646, 200-647, 200-196, 200-197, 200-521, MS 2002A Digital Clamp Meter Open Jaw Electrical, MS 2002A, Digital Clamp Meter Open Jaw Electrical, Clamp Meter Open Jaw Electrical, Meter Open Jaw Electrical, Open Jaw Electrical, Jaw Electrical, Electrical |
