MARMITEK CR2450 Zigbee Temperature and Humidity Sensor
Package Content
- Temperature & humidity sensor
- CR2450 battery
- 3M adhesive tape
- Quick guide
This product requires a Zigbee gateway (sold separately).
Marmitek Smart me app |
Multi language user guide |
Product Overview
Safety Instructions
Please read these instructions thoroughly before you use the device and keep them for future reference.
- Only for indoor use.
- Do not expose the product to extremely high or low temperatures, strong light sources or direct sunlight.
- This product is not a toy. Keep out of reach of children.
- Dispose of batteries as chemical waste. Remove the batteries when you are not using the system for a longer period of time. Check the polarity (+/-) of the batteries when inserting them in the product. Wrong positioning can cause an explosion.
- Repairs or service should only be performed by qualified personnel.
Requirements
This product requires a Smart me Zigbee Gateway (sold separately) that is connected to the Internet.
Installation of the Smart me app
Download and install the Marmitek Smart me app from the Apple app store or the Google Play store.
Launch the Smart me app after installation is completed.
Follow the instructions and register for a new account.
Installation of the Sense MO
- Open the housing of the Sense MO by the recess at the back/bottom of the product (see image) and pull the plastic battery strip to activate the battery.
- The connection status should start flashing rapidly. If connection status is not flashing, press the reset button for 5 seconds until it starts flashing.
- Launch the Smart me app from your smart phone or tablet.
- Select the Smart me Zigbee Gateway.
- Click on the + (at the bottom of the screen) to add a new product, confirm that the connection status is flashing quickly and follow the instructions.
- Press Help button during installation for more information or when installation fails.
Notes for using the product
- After the installation is completed you can configure the Sense MO by using the app.
- Check our website www.marmitek.com for more details and how to use the Smart me products.
Technical specifications
|
Type |
Temperature & humidity |
|
Detection range temperature |
-9.9Ԩ ~ +55Ԩ |
| Detection range humidity |
0 ~ 95 % RH |
|
Battery life |
1 year |
| Wireless technology |
Zigbee 3.0 |
|
Operating range |
up to 30 meters |
| Power |
Battery CR2450 |
|
Standby current |
<35 μA |
| Dimensions (h x w x d) |
62 x 60 x 14 mm |
Declaration of Conformity
Hereby, Marmitek BV, declares that the Sense MO is in compliance with the essential requirements of the 2014/53/EU Directives.
Full Declaration of Conformity is available at www.marmitek.com/en/declarations-of-conformity/
More detailed user guide and instructions are available on our website at www.marmitek.com
Documents / Resources
 |
MARMITEK CR2450 Zigbee Temperature and Humidity Sensor [pdf] User Guide CR2450 Zigbee Temperature and Humidity Sensor, CR2450, Zigbee Temperature and Humidity Sensor |
