Mapleprint P22 Portable Label Maker

Warning

• The paper bin must be clean. Any debris will catch and damage the print head while printing.
• Use alcohol to clean the paper bin and print head.
• Do not disassemble the printer or attempt any self-repairs. Power off the printer if any malfunctions occur.
• Charge in a cool and ventilated room. Do not expose the printer to high humidity or temperatures.
• Keep away from water.
• If any strange scents or smoke comes from the printer, poweroff and unplug immediately.
• Avoid dropping or shaking the printer to prevent damage.
• Do not open the cover while it is printing.
• Do not touch the print head immediately after printing as it will be HOT.
• Use a soft clean cloth to clean the outside of the printer.
• High temperatures may result in poor print quality.
• Use label paper offered by printer manufacturer for best results. Use of other label printers may result in poor print quality or damage to the printer.
• The longevity of the printed labels depends on the quality of the label paper.
• Choose high quality label paper if you need them to last.
• Keep away from children.
• Store in a clean and dry environment. Printer does NOT come with an adapter. Use one with a rating of 5V 1A.
• This printer can only be used in non-tropical environments.
• The printer may cause radio interference. Take any necessary precautionary measures

Machine Parameters

Print Technology	Direct Thermal
Resolution	203 DPI
Supported Paper Width	15mm (12mm available)
Supported Paper type	Gap Paper/ Continuous Paper
Connection	Bluetooth
Paper Cutting	Manual Paper Cutting
Battery	1300 mAh
Charge	Type-C
Input	5V 1A DC
Work Environment	5~40℃,90%RH (no condensation)
Storage Environment	5~40℃,90%RH (no condensation)
Life expectancy	50 km
Product Size	79.5x30x130.6 mm

The contents of this manual may change without prior notice.The components, hardware, software, and technology may be upgraded for better functionality. Contact sales or customer support with any questions
or concerns.

Figure

1. Cover
2. Cover Button
3. Cutting Button
4. Indicator
5. Body

APP Download

For Android and Apple users, you can search “Labelnize” in Google Play or APP store and install. The second method is scan the QR below code.

Install Label Printer Paper

1. Slide the cover button to the other side to open the cover.
2. Load the paper roll in the paper bin. Refer to the image for the correct placement.
3. Unroll the paper enough so that it sticks out of the printer slightly.
4. Close the cover. Press the power/ feed button to calibrate the label and test the printer.

Notes:

1. Double-clicking the power/ feed button can return the first label to the paper bin.
2. Use label paper offered by printer manufacturer for best results.

1. Print Head
2. Label Paper Roll
3. Cutting Button
4. Power/ Feed Button

Connect Machine

1. Turn on Bluetooth on your phone
2. Long-press the power button to start the machine
3. Open the “Labelnize” App, Tap “Unconnected”
4. Find “P22″, tap “Click to connect”

Create New Label

1. Tap “+” to edit label
2. Click the key to customise the label size and paper type
3. Tap “Text” to input text
4. Edit function description After editing, tap to “Print”
5. Select the copies and print

How to choose a label to print it

1. Click “Template”
2. Select a template based on your needs
3. Click the template to edit
4. Click “Print”

Indicator Light

Indicator	Status
Flash Green	Charging
Light off	Fully charged
Flash Red	Print head overheat or low battery, printing can’t be finished
Steady Red	Cover is open or out of paper, printing can’t be finished
Steady Blue	Bluetooth connection successful

Warranty

We offer an extensive warranty for all products that extends through 1 YEAR of the order date. This warranty covers quality-related issues and product defects. During the warranty period, malfunctions occur under normal use in accordance with the instruction manual(determined by our company’s official staff), we can send you a replacement product. This warranty does not apply in cases of abuse, mishandling, unauthorised repair of the product, or the inevitable. If you have any question about this warranty or would like additional information, please contact us directly via e-mail on the packing box. Please keep the original box, packing materials and all documentation in the event that service is required.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interferenc1e2 will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.

ISED Statement

This device contains licence-exempt transmitter(s) / receiver (s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B) / NMB-3(B).

This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

This equipment complies with Canada’s radiation exposure limits set forth for an uncontrolled environment.

Troubleshooting

section, there are options of aligning center, left, or right-click to adjust the text position in the text box. (2) For other patterns or content, you can adjust the position by clicking on it and selecting the [Align] option. It can also be moved with fingers.” image-7=”” count=”8″ html=”true” css_class=””]

Documents / Resources

Mapleprint P22 Portable Label Maker [pdf] User Guide P22, 2A4KN-P22, 2A4KNP22, P22 Portable Label Maker, P22, Portable Label Maker, Label Maker, Maker

References

• User Manual