Maokai-logo

Maokai M2 3 IN 1 Wireless Charging

Maokai-M2-3-IN-1-Wireless-Charging-product

Functional Parameters

  • Product model: M2
  • Product Name: 3-in-1 Wireless Charging
  • Product Material: Zinc Alloy+PC+ABS+
  • Silicone+Tempered Glass
  • Product color: Black/White
  • Input support: QC2.0/QC3.0/PD/AFC
  • Charging interface: TYPE-C
  • Transmission distance: 0-6mm
  • Mobile output: 15W/10W/7.5W/5W
  • Earphone output: 5W
  • Watch output: 2.5W

Product Features

  • Folding storage, compact and convenient
  • Scalable TYPE-C interface
  • Can charge mobile phones, headphones, and watches simultaneously
  • Metal foreign object detection function
  • Over-temperature, over-current, and over-voltage protection functions

Functional Components

Maokai-M2-3-IN-1-Wireless-Charging-fig-1

Instructions

  1. Power on – Connect the TYPE-C data cable to a charging head with QC3.0 or PD protocol, power on by default, and the blue and green lights will turn on for 3 seconds before slowly turning off.
  2. Wireless Charging of Mobile Phone – Connect the power status and place the magnetic phone (such as iPhone 12 series/iPhone 13 series/iPhone 14 series/iPhone 15 series/ iPhone 16 series) on the wireless charging platform. The device will hold the phone and charge it wirelessly. The green light will turn off after 6 breaths.
  3. Wireless charging of earphones – Place the earphone device that supports wireless charging on the product platform, and the earphones will charge normally. The green light will turn off after 6 breaths.
  4. Wireless Charging for Watches – Place the wireless charging watch device on the product platform, and the watch will charge normally. The green light will turn off after 6 breaths.

Maokai-M2-3-IN-1-Wireless-Charging-fig-2

FCC Statement

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide e reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference e by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receive
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located for operating in conjunction with any other antenna or transmitter.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

FAQ

  • Q: What should I do if I experience interference while using the device?
  • A: If you experience interference, try adjusting the positioning of the antennas to improve signal reception. Ensure that the separation distance of at least 20 cm is maintained from all persons.

Documents / Resources

Maokai M2 3 IN 1 Wireless Charging [pdf] Instruction Manual
2BHJE-M2, 2BHJEM2, M2 3 IN 1 Wireless Charging, M2, 3 IN 1 Wireless Charging, Wireless Charging, Charging

References

Leave a comment

Your email address will not be published. Required fields are marked *