Maincor Limited, established in 2007, is a UK-based supplier of
underfloor heating systems and plumbing products. They are known
for their reliable and innovative solutions that are value for
money.

Why Maincor?

Maincor prioritizes high-quality customer service, technical
support, and product innovation. Their products have UK WRAS
approvals and are available nationwide through various outlets.

Innovation and Support

Maincor focuses on innovation, technical support, and customer
satisfaction. Contact their sales team or technical support for
assistance in choosing the right products for your project.

Product Range

Maincor offers underfloor heating systems suitable for all
applications, including retrofit solutions and flexible
pre-insulated pipes. Refer to their Underfloor Heating brochure for
system selection guidance.

FAQ

Q: Where can I purchase Maincor products?

A: Maincor products can be purchased through national plumbing
merchants, quality regional groups, and independent outlets across
the UK.

Q: How can I get technical support for Maincor products?

A: Contact Maincor’s sales team at 01455 555930 or visit their
website for assistance. They also have a qualified technical team
available to answer your queries.

“`

View Fullscreen

Product Price List

FEBRUARY 2024

Underfloor Heating

Radiator Connections

Press Plumbing

Pre-Insulated Pipe

MAINCOR PRICE LIST FEBRUARY 2024

CONTENTS

Company Overview …………………………………………………………………………………………………. 2 – 3 Floor Constructions …………………………………………………………………………………………………..4 – 5 Underfloor Heating Single Area Packs …………………………………………………………………………… 6 Underfloor Heating Systems …………………………………………………………………………………….. 7 – 8 Hard-Wired Heating Controls ……………………………………………………………………………………….. 9 Smart Heating Controls ……………………………………………………………………………………………… 10 Radio Heating Controls ………………………………………………………………………………………………. 10 Underfloor Heating Components ………………………………………………………………………….. 11 – 13 Pipe Systems ………………………………………………………………………………………………………. 13 – 14 MAINPRESS Metal Fittings ……………………………………………………………………………………. 14 – 17 IMPRESS Composite Fittings…………………………………………………………………………………………18 Additional Fittings and Accessories ……………………………………………………………………………….19 Plumbing & Heating Manifold Systems ………………………………………………………………….. 20 – 21 Tools …………………………………………………………………………………………………………………. 22 – 24 Spares and Accessories ……………………………………………………………………………………………….25 Pre-Insulated Pipe Systems …………………………………………………………………………………………..26 Terms and Conditions ………………………………………………………………………………………………….27 Maincor Warranty ………………………………………………………………………………………………………..28

All prices quoted in this price list are retail prices and exclude VAT, which shall be charged at the current rate. E and O E.

ABOUT MAINCOR

BUYING MAINCOR

Established in 2007 as Maincor Limited, we are based in Lutterworth, Leicestershire, supplying customers throughout the United Kingdom.
We are part of Wienerberger Ltd who are an international provider of building materials and water and energy infrastructure.
We specialise in innovative plumbing solutions and underfloor heating, using primarily multilayer composite pipe (MLCP) and we also have a PE-RT product option available. We are especially proud to have introduced Austroflex AustroPUR Pre-Insulated Pipe to the UK; an ideal solution for minimising heat loss in underground applications such as District Heating projects. We have a product range to suit most requirements from large commercial projects such as schools and hospitals to new build housing developments through to small conservatory extensions.
Our products and systems have the required UK WRAS approvals and many also have international approval. We are
a supporter of BEAMA (British Electrotechnical and Allied
Manufacturers Association) and work with CIBSE (Chartered Institution of Building Service Engineers), BSRIA (Building Services Research and Information Association), IDHEE (Institute of Domestic Heating & Environmental Engineers) and CIPHE (Chartered Institute of Plumbing Engineers).

Our products are reliable, innovative and importantly, value for money. We offer a nationwide service for our customers and our products can be purchased through most of the national plumbing merchants, a number of quality regional groups, as well as good independent outlets, ensuring that our products can help your project remain on time and on budget.
If you need help finding the right Maincor products for your project, our nationwide sales team will be happy to assist you. For details of your representative, give Head Office a call on 01455 555930. We also have an `in house’ highly qualified technical team that can answer your questions. From the simplest quick question, to the most complex controls query, our team will be able to help you.

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

MAINCOR PRICE LIST FEBRUARY 2024

WHY MAINCOR?

Why Choose Maincor for Your Projects
Delivering high quality customer service is the number one priority at Maincor, offering unrivalled technical support, delivery into the market place, and new product innovation.

Innovation
Innovation at the heart of everything we do

Support
Technical Support every step of the way

Innovation Innovation is at the heart of everything we do. Maincor in Germany have won Top Innovator awards, filed numerous patents and works on constant improvements to the product range. In the UK our latest developments are a range of underfloor heating systems specifically for retrofit applications and the introduction of flexible pre-insulated pipe. In 2017 we were 10 years old in the UK, there’s more every year and still plenty more to come.
Knowledge
Experience back to the roots of MLCP
Knowledge Our team has experience back to the very roots of multilayer pipe systems in the UK and supports the CIBSE standards for the design and installation of plumbing, central heating and underfloor heating. We also have a resident renewable energy specialist to ensure that systems are correctly designed to give the best performance. This expertise enables us to advise our customers on the best way to use Maincor products in any project to meet your requirements and exceed your expectations.
We are well-networked. We are supporters of BEAMA (British Electrotechnical and Allied Manufacturers Association) Underfloor Heating Forum; we are a member of BSRIA (the Building Services Research and Information Association); and supply a member to the CIBSE Domestic Heating Design Panel (Chartered Institution of Building Service Engineers). We have also supplied occasional representatives to the Government’s Industry Compliance Forums for developing building regulations and the Green Deal. Our technical department qualifies its advice and training by adherence to the HNC Building Services Engineering Standard, CIBSE design guides and the BPEC (British Plumbing Employers Council) underfloor heating training courses.

Support Our first rate technical support ensures that help is available every step of the way; from quotation, material schedules, drawing and full design, through to visits on site and installer training. We have some of the shortest quote turnarounds in the industry and if you’ve got an emergency, we can respond immediately – our service starts as soon as you call. To ensure that our customers receive the best service, all of our phones are answered by one of our highly trained staff not an automated system. We know how important the personal touch is.

Please see our Underfloor Heating brochure for help in deciding the most suitable system for your project.

Underfloor Heating Systems for all applications

Reliability
5 Star Service and Reliability
Reliability Our products are among the highest quality in the industry and we are so proud of our factories that visitors are always welcome. Our multilayer pipe is formstable, has the lowest expansion rates of any plastic pipes and meets the high standards of approval for the UK. We are particularly proud of our press fitting range which offers unrivalled quality with its unique `D’ sealing ring. We pride ourselves in offering reliable products and our 10 year insurance backed warranty – which covers consequential damages – is superior to many leading brands reflecting our real confidence in our products. This is further supported by our Product Replacement Guarantee, in the event of a manufacturing fault we will provide replacement MLCP and fitting products for up to 50 years.

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

MAINCOR PRICE LIST FEBRUARY 2024

FLOOR CONSTRUCTIONS

Products at a glance
System selector
The following systems are used in both new build and retrofit situations but are most commonly used in new build projects.

System Name

Screed Floor

Suspended Floor – HEP’s

Floating Floor

Chipdeck

Schematic

System Type

Traditional screeded flooring system

Pre grooved aluminium plates for suspended floors

Aluminium coated XPS insulation panel

Structural timber deck

System Description

Pipes are typically laid onto insulation. Pipes are held in position by Clips, Clamptrack or Pipe Positioning Panels. A screed
is laid over the pipes

Aluminium plates are to be supported by joists at 400mm centres. The plates have channels to support the pipes and aid heat distribution. A structural chipboard
or ply is laid over

Pre routed, extruded polystyrene insulation panel (KF300) with
bonded aluminium foil. Typically, the Unitop4 is adhered to the top or alternatively a T&G deck or an
engineered wood is laid over

Pre routed 22mm chipbooard with aluminium foil for heat distribution. A 6mm ply (by others) to be glued to upper side. Pipes to be fed into
panels from below

Build height*

65-75mm screed

Within void between joist

24mm*

Pipe

16mm MLC or 16mm PERT

Typical Pipe Centres

150 or 200mm

200mm

UFH Approx weight Floor coverings Density

130 kg/m² (65mm)
Carpet, vinyl, tiles**, engineered wood & laminates
2000 kg/m

2 kg/m²
Carpet, vinyl, tiles**, engineered wood & laminates
N/A

5 kg/m²
Carpet, vinyl, engineered wood & laminates
1500 kg/m³

Thermal Conductivity

Screed: 1.2 – 1.5 W/mK

Aluminium: 220 W/mK

Insulation: 0.034 W/mK

Compressive Strength

N/A

300 Kpa @ 10%

Optional Additions

Below: Soundstop, Superfoil, Screedfoil. Above: Unitop4

N/A

Below: Soundstop Above: Unitop4

System Benefits

Solid underfoot, high output, cost effective, low water temperature required, good acoustic performance

No increase in build height, light weight system, cost effective, dry assembly

Low build height, dry assembly, cost effective, light weight system,
includes insulation layer

* Minimum Build height when using Unitop4 as applicable ** Tiles are likely to require the Unitop4 decoupling / stress relieving layer

Within 28mm structural deck Superflow12 150mm 17 kg/m²
Carpet, vinyl, tiles**, engineered wood & laminates 650 kg/m³
Chipboard: 0.16 W/mK N/A
N/A
Minimal increase in build height, dry assembly

Please forward your project plans to quotations@maincor.co.uk for a full system design quote

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

MAINCOR PRICE LIST FEBRUARY 2024

FLOOR CONSTRUCTIONS

Products at a glance
System selector
The following systems are used in both new build and retrofit situations but are most commonly used in retrofit projects.

System Name

Overboard

Tilefit12

Lowfit12

Low Profile Floating Floor

Schematic

System Type System Description

Low profile gypsum board

Cement faced XPS300 insulation panel

Plastic Low Flow Panel with Maincor Mainpour levelling compound

Pipes are laid into 18mm pre routed gypsum board. A separating layer is often required depending on
required floor finish

Pipes are fitted into an 18mm cement coated and pre routed, extruded polystryrene panel.
Designed for direct tiling

Pipes are secured by self adhesive castellated panels. Maincor Mainpour levelling compound is to be poured over to encase the pipes to a
depth of 20mm

Aluminium coated EPS250 insulation panel
Pre routed expanded polystyrene panel with 45 micron aluminium
foil. Typically, the Unitop4 is adhered to the top or alternatively a T&G deck or an engineered wood
is laid over

Build height*

22mm*

18mm

20mm

22mm*

Pipe

Superflow12

Typical Pipe Centres

150mm

UFH Approx weight Floor coverings Density

23 kg/m²
Carpet, vinyl, tiles**, engineered wood & laminates
1150 kg/m³

5 kg/m² Direct tile onto flexible tile adhesive
30 kg/m³ (insulation only)

34 kg/m²
Carpet, vinyl, tiles**, engineered wood & laminates
1700 kg/m³

5 kg/m²
Carpet, vinyl, engineered wood, & laminates
25 kg/m³

Thermal Conductivity

Gypsum board: 0.32 W/mK

XPS Insulation: 0.033 W/mK

0.2 W/mK

Insulation: 0.033 W/mK

Compressive Strength

N/A

300 kPa @ 10% compression

N/A

250 kPa @ 10% compression

Optional Additions

Below: Soundstop, Superfoil, Above: Unitop4

Below: Soundstop

Above: Unitop4

Below: Soundstop Above: Unitop4

System Benefits

Solid underfoot, highest output, cost effective, low water temperature required, good acoustic performance

Low build height, ideal for tiled applications, light weight system,
includes insulation layer

Solid underfoot, high output, cost effective, low water temperature required, good acoustic performance

Low build height, dry assembly, cost effective, light weight system,
includes insulation layer

* Minimum Build height when using Unitop4 as applicable **Tiles are likely to require the Unitop4 decoupling / stress relieving layer

Please forward your project plans to quotations@maincor.co.uk for a full system design quote

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

MAINCOR PRICE LIST FEBRUARY 2024

UNDERFLOOR HEATING SINGLE AREA PACKS

Single Area Pack For Screeded Floors

The Maincor Single Area Pack for screeded floors is ideal for extensions and conservatories. The correct pack for the installation should be selected based on the floor area (m²) of the project.
The pack includes all the necessary components to install the underfloor heating pipes onto floor grade insulation*.
Packs are available that include a wired programmable thermostat.
Pack contents
q 16 x 2mm Underfloor Heating Pipe q Maincor Underfloor Heating Manifold q 16 x 2mm Manifold Pipe Connectors q Ball Valves q Maincor Control Pack q Programmable Wired Thermostat q Edge Insulation q Pipe Staples q Bevelling Tool (MLCP Pack Only) q Pipe Cutter

Actual products may vary from those shown above
Single Area Pack – MLC Pipe
Part No.
SAP1SW SAP2SW SAP3SW SAP4SW
Single Area Pack – PE-RT Pipe
Part No.
SAP5SW SAP6SW

Floor Area 0 – 18m2 18 – 28m2 28 – 36m2 36 – 44m2
Floor Area 0 – 18m2 19 – 36m²

Maximum Output (KW)
1.8KW 2.8KW 3.6KW 4.4KW

Price Per Pack
£1,045.22 £1,263.93 £1,395.16 £1,501.59

Maximum Output (KW)
1.8 KW 3.6 KW

Price Per Pack
£782.70 £1,045.84

Optional Motorised Zone Valve for connecting to an existing or new heating system
Maincor 2 Port Zone Valve and Actuator offers independent zone control. This normally closed valve can also activate the heat source via the volt free contacts.

Part No.
ZV22 ZV28

Description
22mm 2 Port Valve & Actuator 28mm 2 Port Valve & Actuator

Pack Qty Price Each
1 £133.50 1 £167.65

* Floor grade insulation to comply with Part L of the Building Regulations is not included.

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

MAINCOR PRICE LIST FEBRUARY 2024

UNDERFLOOR HEATING SYSTEMS

UFH Manifold with Flowmeters

Maincor 1 – 12 port UFH Manifolds are supplied complete with flowmeters for ease of commissioning. Also included within the manifold arrangement are fill and drain ports, manual air vents and fixing brackets which are all pre fitted for a fast installation. Requires 3/4″ pipe connectors and 1″ ball valves, both are sold separately (see below).

Part No.
TUFHM01 TUFHM02 TUFHM03 TUFHM04 TUFHM05 TUFHM06 TUFHM07 TUFHM08 TUFHM09 TUFHM10 TUFHM11 TUFHM12

Description
Maincor 1 Port Manifold with Flow Meters Maincor 2 Port Manifold with Flow Meters Maincor 3 Port Manifold with Flow Meters Maincor 4 Port Manifold with Flow Meters Maincor 5 Port Manifold with Flow Meters Maincor 6 Port Manifold with Flow Meters Maincor 7 Port Manifold with Flow Meters Maincor 8 Port Manifold with Flow Meters Maincor 9 Port Manifold with Flow Meters Maincor 10 Port Manifold with Flow Meters Maincor 11 Port Manifold with Flow Meters Maincor 12 Port Manifold with Flow Meters

Pack Qty
1 1 1 1 1 1 1 1 1 1 1 1

Price Each
£101.16 £138.04 £191.28 £237.27 £284.13 £329.46 £377.68 £425.27 £471.19 £517.40 £563.25 £613.63

Electro-Thermic Head

Maincor offers 230V and 24V Electro-Thermic Heads which open and close to control the flow of water around the underfloor circuits.

Part No.
ETH024-04 ETH230-04

Description
Electro-Thermic Head 24V Electro-Thermic Head 230V

Pack Qty Price Each

£38.05

ETH230-04

Manifold Pipe Connectors

Maincor manifold pipe connectors join 12, 16 & 20mm pipework to the manifold.

Part No.
EUR1213 EUR16 EUR20P

Description
¾” x 12 x 1.3mm Manifold Pipe Connector ¾” x 16 x 2mm Manifold Pipe Connector ¾” x 20 x 2mm Manifold Pipe Connector

Pack Qty Price Each

£7.39

£4.27

£5.26

Blanking Cap

Maincor Blanking Caps are used to blank-off 3/4″ outlets on the Plumbing, Radiator or Underfloor Heating Manifolds.

Part No. DMBP34F

Description Brass Blanking Cap ¾” Female Thread

Pack Qty Price Each

£3.17

Straight Ball Valve

Maincor Straight Ball Valves with union connector are used to provide isolation of the flow and return pipework connected onto the Radiator and Underfloor Heating Manifolds. This allows manifolds to be isolated both for filling the system, or draining down, with the risk of air ingression.

Part No. 50903002

Description

Pack Qty Price Each

1″ x 1″ Straight Ball Valve with Union – Heating (single)

£19.36

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

MAINCOR PRICE LIST FEBRUARY 2024

UNDERFLOOR HEATING SYSTEMS

UFH Control Pack

The Maincor UFH Control Pack is a pre-assembled unit designed to be easily fixed via 1″ ball valves to the manifold and is used to blend and circulate the water around the underfloor heating system. The Control Pack includes an `A’ rated energy efficient pump and is suitable for serving areas of up to 150m² or a maximum heat load of 14kW.

Part No. CP150A

Description UFH Control Pack – 150m2

Pack Qty Price Each 1 £614.73

Large Control Pack

The Maincor Large Control Pack is a pre-assembled water blending and pumping unit designed to be easily fixed via 1″ ball valves, to the manifold. The pack includes an `A’ rated energy efficient pump and an actuated blending valve and is suitable for use with floor areas of up to 250m² or a maximum output of 20kW.

Part No.
CP250 CP250(R)

Description
UFH Control Pack – 250m2 Left Hand Configuration UFH Control Pack – 250m2 Right Hand Configuration

Pack Qty
1 1

Price Each
£1140.05 £1140.05

Weather Compensated Control Pack

The Maincor Weather Compensated Control Pack modulates the flow temperature to the system requirements based on outdoor weather conditions. The unit includes a blending valve , an `A’ rated energy efficient pump, a temperature controller complete with temperature sensor and an outdoor sensor. The unit is to connect to the manifold via 1″ ball valves and is suitable for use with floor areas of up to 250m² or a maximum output of 20kW.

Part No.
WC250 WC250 (R)

Description

Pack Qty

Weather Comp. Large Control Pack – 250m2 Left Hand Config. 1 Weather Comp. Large Control Pack – 250m2 Right Hand Config. 1

Price Each
£1207.12 £1207.12

Heat Pump Pack

The Maincor Heat Pump Pack is for use when water blending controls are not required. The unit is preassembled, includes 2 thermometers and is designed to be fitted either side of the manifold, via 1″ ball valves. An additional high limit thermostat, preset to 65oC is available if required. See below for details.

Part No.
HP250 HLT

Description
Heat Pump Control Pack High Limit – Pre Set to 65oC

Pack Qty Price Each

1 £502.96

£59.00

Thermostatic Manual Mixing Valve
Maincor Thermostatic Manual Mixing Valve for blending water to meet design temperature.

Part No.
MMV3-22 MMV3-28

Description
22mm Manual 3 Port Mixing Valve 28mm Manual 3 Port Mixing Valve

Pack Qty Price Each
1 £159.57 1 £239.34

2 Port Zone Valve and Actuator

Maincor 2 Port Zone Valve and Actuator offers independent zone control. This normally closed valve can also activate the heat source via the volt free contacts.

Part No.
ZV22 ZV28

Description
22mm 2 Port Valve & Actuator 28mm 2 Port Valve & Actuator

Pack Qty Price Each
1 £133.50 1 £167.65

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

MAINCOR PRICE LIST FEBRUARY 2024

HARD-WIRED HEATING CONTROLS

230V Night Set Back Dial Thermostat
The 230V Thermostat has an adjustable Night Set Back (NSB) feature from 2oC to 7oC (factory pre set 4.5oC). The temperature range can be limited, stopping accidental movement and includes terminals to add an optional remote sensor. The thermostat requires a 4 core plus earth cable if the NSB feature is to be utilised or 3 core plus earth if not.

Part No.
SBSTAT-02 SP-02 SH-02

Description
230V Night Set Back Dial Thermostat 1.5m Sensor for NSB Thermostat Sensor Housing

Pack Qty Price Each

£46.73

£15.35

£31.52

Digital Thermostat

The 230V Thermostat has a Night Set Back (NSB) feature (factory pre set 4oC). The temperature can be locked at the thermostat and the unit includes terminals to add an optional remote sensor. The thermostat requires a 4 core plus earth cable if the NSB feature is to be utilised.

Time Clock

Part No.
DRS1 SP-03 SH-02

Description
230V Digital Thermostat 3m Sensor for use with the Digital thermostat Sensor Housing

Pack Qty
1 1 1

Price Each
£59.90 £14.28 £31.52

The Single Channel Time Clock is used to switch the UFH system on/off, or to operate Night Set Back. (note, for use with SBSTAT-02 and DRS1 – see above).

Part No. TC-02

Description Single Channel Time Clock

Pack Qty Price Each 1 £106.80

230V Programmable Thermostat
The 230V Programmable Thermostat can work in 3 modes; to control the air temperature only, to control the air temperature and limit the floor temperature, or to only control the floor temperature. A floor sensor is included with each programmable thermostat and a 3 core plus earth cable is required.

Part No. PRS-02

Description 230V Programmable Thermostat c/w 1.5m Sensor

Pack Qty Price Each 1 £114.79

230V Touchscreen Programmable Thermostat

The 230V Touchscreen Programmable Thermostat offers control over the air temperature of the room where its situated, or remote sensing if the additional sensor is purchased. The thermostat requires a 3 core plus earth cable.

Part No.
TSPRS-02 SP-03 SH-02

Description

Pack Qty Price Each

230V programmable Thermostat 3m Sensor for use with 230V Touchscreen Prog. Thermostat Sensor Housing

1 £156.66

£14.28

£31.52

Wiring Centre

The 230V Wiring Centre has terminals to wire up to 8 thermostats (zones). The unit controls the operation of the Electro-Thermic Heads, the boiler and the Zone Valve. The unit is for use with all controls listed on this page.

Part No.
WC3-02 WC4-02

Description
230V 8 Zone Wiring Centre 230V 4 Zone Wiring Centre

Pack Qty Price Each
1 £155.17 1 £142.31

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

MAINCOR PRICE LIST FEBRUARY 2024

SMART HEATING CONTROLS

Wi-Fi Thermostats

Data communication is managed via a wireless network. The Neohub should be plugged into a wireless router and this allows for the system to be controlled via Smart Phones or Tablets.

Part No.
NEOHUB SP-03 SH-02

Description

Pack Qty Price Each

Neohub Remote Control Unit 3m Sensor for use with Prog. App Enabled Thermostats Sensor Housing

1 £335.31

£14.28

£31.52

Part No.
NEOSTAT NEOSTAT (B) NEOSTAT (S)

Description

Pack Qty Price Each

230V Programmable App Enabled Thermostat (White) 230V Programmable App Enabled Thermostat (Black) 230V Programmable App Enabled Thermostat (Silver)

1 £171.01 1 £171.01 1 £171.01

Part No.
NEOAIR NEOAIR (B) NEOAIR (S)

Description

Pack Qty Price Each

Radio Programmable App Enabled Thermostat (White) Radio Programmable App Enabled Thermostat (Black) Radio Programmable App Enabled Thermostat (Silver)

1 £171.01 1 £171.01 1 £171.01

RADIO HEATING CONTROLS

Radio Programmable Thermostat
The Radio Programmable Thermostat can operate as a programmable or non-programmable thermostat, depending on the mode selected. The thermostat has terminals available to take an external sensor.

Part No.
RFPRS-02 SP-03 SH-02

Description

Pack Qty Price Each

Radio Slimline Thermostat 3m Sensor for use with Radio Programmable Thermostat Sensor Housing

1 £137.80

£14.28

£31.52

Radio Receiver

The 8 Zone Radio Receiver receives signals from up to 8 thermostats (zones). The unit controls the operation of the Electro-Thermic Heads, the boiler and the Zone Valve. The unit is for use with the Radio Slimline and Radio Touchscreen Thermostats.

Part No. RFWC-02

Description 8 Zone Radio Receiver

Pack Qty Price Each 1 £321.90

RF Switch

The RF Switch is a receiver for a single zone of underfloor heating which includes a boiler output enable. Output indications are provided and the unit is surface mount for easy installation.

Part No. RFSWITCH

Description Single Zone Radio Receiver

Pack Qty Price Each 1 £107.30

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

MAINCOR PRICE LIST FEBRUARY 2024

UNDERFLOOR HEATING COMPONENTS

Superfoil Insulation

The product is CE approved and has a thermal resistance of 0.8m²k/W, this is equivalent to 25mm Polystyrene. Provides sound insulation and reduces impact noise up to an estimated DI = 22 dB.

Heat Emission Plate

Part No. SFUFFOIL

Description Supafoil Insulation 12m2 roll

Pack Qty 1

Per Roll £295.00

Maincor Heat Emission Plates are for use in timber suspended floors where the joists are at 400mm centres, or in floating floor applications. The plates are 390mm wide x 1m in length. Allow 2.2 plates per m2 of floor area 16mm pipe at 200mm centres. Varying pipe sizes and centres are available including a `Fit From Below’ option (Special order only, please contact Maincor Technical Office for availability).

Part No. HEP001

Description Heat Emission Plate

Pack Qty Price Each

£16.25

Floating Floor Low Profile
Pre-routed polystyrene foam with aluminium foil, 45 microns thick, factory bonded to the upper surface and main grooves of the panel. Panels are available in different thicknesses and pipe centres. (Special order only, please contact Maincor Technical Office for availability).

Part No. EP18 EP20 RFT50

Description

Pack Qty

Panel (18mm x 1.2m x 0.6m) for 12mm pipe at 150mm centres

Panel (20mm x 1.25m x 0.6m) for 16mm pipe at 200mm centres

Reinforced Foil Tape (50mm x 45m)

Price Each £35.00 £32.60 £33.53

Pipe Staples

Maincor Pipe Staples are used to fix pipework to floor grade insulation, which must be a minimum depth of 25mm. They can be installed by hand or by staple gun (See page 21 in tools section).

Part No. PS2004-040 PS2015-057

Description 40mm Pipe Staples 57mm Pipe Staples

Pack Qty Price Each

300

£0.11

300

£0.16

Clamp Track

Maincor Clamp Track is designed to secure 16mm pipe. It has a self adhesive backing for ease of installation. Allow 1m for every m² of floor area.

Part No. 50903036

Description Clamp Track

Pack Qty 100m

Per m £3.80

Screed Foil Edge Insulation

Maincor Screed Foil is designed to be placed directly on top of the floor grade insulation, providing a greater level of reflective insulation. Supplied in 60m x 1.25m x 4mm rolls. Thermal resistance = 0.081m2K/W.

Part No. 50903019

Description Screed Foil Insulation

Pack Qty 75m2

Per m2 £6.19

Maincor Edge Insulation is utilised around the perimeter of a room with a screeded floor to absorb expansion from the screed and prevent thermal bridging.

Part No. 50903022

Description Maincor Edge Insulation

Pack Qty 25m

Per m £1.56

Pipe Positioning Panel

Maincor Pipe Positioning Panels are used for securing 16mm pipe within screeded floors. The castellated panels allow for the pipe to be secured at 50mm – 300mm centres. Insulation is not included. The boards are to be overlapped. Each board covers an active area of (0.8m x 1.4m) 1.12m²

Part No. 51903060

Description Pipe Positioning Panel

Pack Qty Per Panel

£17.39

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

MAINCOR PRICE LIST FEBRUARY 2024

UNDERFLOOR HEATING COMPONENTS

Maincor PE-RT Coils

Superflow12 PE-RT 5 layer UFH pipe including EVOH oxygen barrier, supplied in coils.

Part No. 53120038080 53120038100 53120038200 53120038240 53120038500 EUR1213 U9282500

Description Superflow12 UFH Pipe 12mm x 1.3mm Superflow12 UFH Pipe 12mm x 1.3mm Superflow12 UFH Pipe 12mm x 1.3mm Superflow12 UFH Pipe 12mm x 1.3mm Superflow12 UFH Pipe 12mm x 1.3mm 12mm x 1.3mm Manifold Pipe Connector 12mm Pipe Bend Support

Pack Qty 80m
100m 200m 240m 500m
1 1

Price p/m £1.78 £1.78 £1.78 £1.78 £1.78 £7.39 £3.43

OverboardTM Dry Screed Panel – Straight
Overboard dry screed panels are used as carriers for pipes in underfloor heating systems. 18mm thick straight feed panel.

Part No. 51923049

Description

Pack Qty

Overboard 18mm straight panel (1.2m x 0.6m)

Price Each £35.78

OverboardTM Dry Screed Panel – Return
Overboard dry screed panels are used as carriers for return and feeder pipes in underfloor heating systems. 18mm thick end return panel.

Part No.

Description

Pack Qty

51923050

Overboard 18mm return panel (0.6m x 0.6m)

51923053

Overboard 18mm half moon return panel (0.6m x 0.6m) 1

Mainadhesive for securing Overboard panels to the sub-floor.

GYPDECK

Mainadhesive tube (1.1kg bottle covers 20m2)

30mm long screws for securing Overboard panels to timber sub-floors.

OBSCREW30 30mm Overboard screws (200 screws covers 20m2) (200/box)

Price Each £28.08 £27.10
£34.21
£22.67

Tilefit12

Tilefit12 has a reinforced cement face on the upper and lower sides of the board. The pre-routed extruded polystyrene has a high compressive strength (300 kPa) making it the ideal solution for tiled floors. Board dimensions : 1.2m x 0.6m x 18mm
The 35mm Fixing Discs and Pozi screws are used for fixing the Tilefit12 boards to timber subfloors. 6 of each item required per board.

Lowfit12

Part No.
TB18-U RTMID35 RTSCREWT

Description 18mm Tile Backer Board (0.72m2) 35mm Fixing Discs (100/box) 5 x 60 CSK POZI Screw (200/box)

Pack Qty
1 100 200

Price Each
POA POA POA

Lowfit12 panels secure the pipework ready for levelling compound to be poured over. A selfadhesive backing is included for fast fixing and allows levelling compound to flow into the noggins creating a solid floor. Each panel covers an active area of 0.6m2. 12mm nail clips are also supplied to secure pipe where required. Supplied in boxes of 100. Mainpour levelling compound offers high compressive and flexural strength and is designed to handle the expansion and contraction associated with UFH systems. The compound is to be laid at a depth of 20mm. Supplied in 25kg bags. Mainpour Primer is required to prime and seal the subfloor to ensure an effective bond between flooring elements. Each 1kg bottle will cover an area of 15m2.

Part No.
51903160 NCW10 ST-25 PRIMER

Description

Pack Qty

Pipe Positioning Panel (0.6m2/panel)

9.6m2

Nail in Clip 12 (100/box)

Maincor Mainpour – Levelling Compound (per bag) 25kg

Maincor Primer (per kg)

1kg

Price Each
POA POA POA POA

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

MAINCOR PRICE LIST FEBRUARY 2024

UNDERFLOOR HEATING COMPONENTS (Continued)

System Additions – Unitop4
The Unitop4 board is a 4mm thick, decoupling/stress reliving layer which also reduces impact noise and is suitable for traffic loads of up to 5 kN/m2. The compressed cellulose board is to be laid upon a bed of Maincor MS Adhesive and approximately 500g/m2 is required.

Part No. UT4 UTA600 UTA16

Description Unitop4 decoupling layer 4mm x 1.2m x 0.6m (0.72m2) Maincor MS Adhesive for Unitop4 Maincor MS Adhesive for Unitop4

Pack Qty Price Each

POA

600ml

POA

16kg

POA

System Additions – Soundstop
6mm Soundstop manufactured from recycled rubber granules. Soundstop is a robust and resilient 6mm layer which improves the acoustic performance of floors. The Soundstop is to be bonded to the subfloor using Soundstop adhesive and approximately 350g/m2

Part No. SS6 SSA

Description 6mm Soundstop 1.25 x 10m x 6mm (12.5m2) Adhesive for bonding Soundstop to subfloor 5kg

Pack Qty Price Each

12.5m2

POA

5kg

POA

PIPE SYSTEMS

Maincor MLCP, PE-RT/AL/PE-RT Coils
Maincor MLCP, PE-RT/AL/PE-RT, overlap welded aluminium multilayer 100% barrier composite pipe, supplied in coils.

Part No. 8160014050 8160014075 8160014100 8160014120 8160014200 8160014500 8200014100 8200014025 8250014050 8250014025 8320014050

Description Maincor MLCP 16x2mm Maincor MLCP 16x2mm Maincor MLCP 16x2mm Maincor MLCP 16x2mm Maincor MLCP 16x2mm Maincor MLCP 16x2mm Maincor MLCP 20×2.25mm Maincor MLCP 20×2.25mm Maincor MLCP 25×2.5mm Maincor MLCP 25×2.5mm Maincor MLCP 32x3mm

Pack Qty Price Per m

50m

£2.46

75m

£2.46

100m

£2.46

120m

£2.46

200m

£2.46

500m

£2.46

100m

£3.84

25m

£3.84

50m

£6.07

25m

£6.07

50m

£8.72

Maincor MLCP, PE-RT/AL/PE-RT Straight Lengths
Maincor MLCP, PE-RT/AL/PE-RT, overlap welded aluminium multilayer 100% barrier composite pipe, supplied in 5m straight lengths.

Part No. 8160014005 8200014005 8250014005 8320014005 8400014005 8500014005 8630014005

Description Maincor MLCP 16x2mm Maincor MLCP 20×2.25mm Maincor MLCP 25×2.5mm Maincor MLCP 32x3mm Maincor MLCP 40x4mm Maincor MLCP 50×4.5mm Maincor MLCP 63x6mm

Pack Qty Price Per m

125m

£2.88

75m

£4.77

50m

£7.07

25m

£8.88

20m

£14.56

20m

£21.74

15m

£35.13

Maincor Pre-Insulated Pipe Coils
Maincor pre-insulated MLCP supplied in 9mm,13mm or 26mm insulation.

Part No. 10016209 10020229 10025259 100162013 100202213 100252513 100323013 100162027 100202227 100252527

Description

Pack Qty Price Per m

Maincor Pre-insulated MLCP 16x2mm (9mm insulation)

50m

£4.52

Maincor Pre-insulated MLCP 20×2.25mm (9mm insulation) 50m

£6.01

Maincor Pre-insulated MLCP 25×2.5mm (9mm insulation) 50m

£7.86

Maincor Pre-insulated MLCP 16x2mm (13mm insulation)

50m

£4.77

Maincor Pre-insulated MLCP 20×2.25mm (13mm insulation) 50m

£6.63

Maincor Pre-insulated MLCP 25×2.5mm (13mm insulation) 50m

£8.53

Maincor Pre-insulated MLCP 32x3mm (13mm insulation)

25m

£11.30

Maincor Pre-insulated MLCP 16x2mm (26mm insulation)

25m

£8.14

Maincor Pre-insulated MLCP 20×2.25mm (26mm insulation) 25m

£11.99

Maincor Pre-insulated MLCP 25×2.5mm (26mm insulation) 25m

£13.85

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

MAINCOR PRICE LIST FEBRUARY 2024

PIPE SYSTEMS (Continued)

Maincor Pipe in Conduit Coils

Maincor 16mm and 20mm MLCP supplied in red or blue conduit.

Part No. 6111620150 6111620250 6112023150 6112023250

Description Maincor MLCP 16x2mm Pipe in Conduit (Red) Maincor MLCP 16x2mm Pipe in Conduit (Blue) Maincor MLCP 20×2.25mm Pipe in Conduit (Red) Maincor MLCP 20×2.25mm Pipe in Conduit (Blue)

Pack Qty Price Per m

50m

£4.65

50m

£4.65

50m

£6.97

50m

£6.97

Maincor Conduit

Maincor pipe conduit for 12mm, 16mm, 20mm, 25mm and 32mm pipe.

Part No. 516350 520150 520250 520350 523150 523250 523350 529150 529250 529350 536325

Description 16mm Pipe Conduit (Black) for 12mm pipe
} 20mm Pipe Conduit (Red)
20mm Pipe Conduit (Blue) for 16mm pipe 20mm Pipe Conduit (Black
} 23mm Pipe Conduit (Red)
23mm Pipe Conduit (Blue) for 20mm pipe 23mm Pipe Conduit (Black)
} 29mm Pipe Conduit (Red)
29mm Pipe Conduit (Blue) for 25mm pipe 29mm Pipe Conduit (Black) 36mm Pipe Conduit (Black) for 32mm pipe

Pack Qty Price Per m

50m

£1.10

50m

£1.22

50m

£1.22

50m

£1.22

50m

£1.55

50m

£1.55

50m

£1.55

50m

£2.25

50m

£2.25

50m

£2.25

25m

£2.64

METAL FITTINGS

Scan here to see an installation video

Equal Press Tee
A C
B

Maincor Equal Press Tee Fittings are used to branch off main distribution pipework, allowing effective distribution to multiple services.

Part No. PT16X3 PT20X3 PT25X3 PT32X3 PT40X3 PT50X3 PT63X3

Description A x B x C Press Tee 16x16x16mm Press Tee 20x20x20mm Press Tee 25x25x25mm Press Tee 32x32x32mm Press Tee 40x40x40mm Press Tee 50x50x50mm Press Tee 63x63x63mm

Pack Qty 10 10 10 5 1 1 1

Price Each £8.93
£12.88 £19.68 £37.64 £59.61 £68.30 £118.11

Reducing Press Tee
A C
B

Maincor Reducing Press Tees are used to branch off main distribution pipework, allowing effective distribution to multiple services where reduction in size is required.

Part No. PTR626 PTR226 PTR262 PTR266 PTR252 PTR526 PTR562 PTR556 PTR522 PTR525 PTR565 PTR566 PTR323 PTR353 PTR355 PTR363 PTR424 PTR454 PTR433 PTR434 PTR555 PTR535 PTR545 PTR646

Description A x B x C Press Tee 16x20x16mm Press Tee 20x20x16mm Press Tee 20x16x20mm Press Tee 20x16x16mm Press Tee 20x25x20mm Press Tee 25x20x16mm Press Tee 25x16x20mm Press Tee 25x25x16mm Press Tee 25x20x20mm Press Tee 25x20x25mm Press Tee 25x16x25mm Press Tee 25x16x16mm Press Tee 32x20x32mm Press Tee 32x25x32mm Press Tee 32x25x25mm Press Tee 32x16x32mm Press Tee 40x20x40mm Press Tee 40x25x40mm Press Tee 40x32x32mm Press Tee 40x32x40mm Press Tee 50x25x50mm Press Tee 50x32x50 mm Press Tee 50x40x50mm Press Tee 63x40x63mm

Pack Qty 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 1 1 1 1 1 1 1 1

Price Each £14.62 £14.01 £14.01 £13.76 £15.74 £15.74 £17.02 £17.62 £16.13 £17.68 £17.04 £15.02 £23.96 £26.64 £24.88 £22.49 £55.88 £58.99 £48.43 £46.63 £57.75 £59.61 £60.85
£124.19

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

MAINCOR PRICE LIST FEBRUARY 2024

METAL FITTINGS (Continued)

Press Tee with Female Thread

A C
B

Maincor Press Tee with a BSP female thread connection situated on the branch (B).

Part No.
PTF616 PTF212 PTF515 PTF525 PTF323 PTF333 PTF424 PTF535

Description A x B x C
Press Tee with Female Thread 16x½”x16mm Press Tee with Female Thread 20x½”x20mm Press Tee with Female Thread 25x½”x25mm Press Tee with Female Thread 25x¾”x25mm Press Tee with Female Thread 32x¾”x32mm Press Tee with Female Thread 32×1″x32mm Press Tee with Female Thread 40x¾”x40mm Press Tee with Female Thread 50×1″x50mm

Pack Qty Price Each

£14.02

£14.79

£18.93

£30.96

£30.98

£52.16

£65.20

Press Coupler/Press Reducer

Maincor Straight Press Couplers / Reducers are used where straight lengths in excess of 5m are required. By utilising the straight press fitting, multiple 5m lengths can be coupled together, giving the desired installation length.

Part No.
Couplers PM1616 PM2020 PM2525 PM3232 PM4040 PM5050 PM6363 Reducers PMR206 PMR252 PMR256 PMR322 PMR323 PMR403 PMR503 PMR504 PMR634 PMR635

Description
Press Coupler 16x16mm Press Coupler 20x20mm Press Coupler 25x25mm Press Coupler 32x32mm Press Coupler 40x40mm Press Coupler 50x50mm Press Coupler 63x63mm
Press Reducer 20x16mm Press Reducer 25x20mm Press Reducer 25x16mm Press Reducer 32x20mm Press Reducer 32x25mm Press Reducer 40x32mm Press Reducer 50x32mm Press Reducer 50x40mm Press Reducer 63x40mm Press Reducer 63x50mm

Pack Qty Price Each

£5.98

£8.01

£11.98

£18.02

£23.72

£48.74

£76.76

£7.35

£10.37

£9.64

£20.05

£18.02

£31.79

£40.98

£44.27

£75.43

£72.43

Straight Press to Male Connector

Maincor Straight Press to Male Connectors are used to connect MLCP to a wide variety of system components. The Male thread is a BSP connection and is also used in conjunction with plumbers’ fittings to achieve final connections.

Part No.
PM16M1 PM16M2 PM20M1 PM20M2 PM25M2 PM25M3 PM32M3 PM32M4 PM40M4 PM50M5 PM63M6

Description
Straight Press to Male Thread 16x½” Straight Press to Male Thread 16x¾” Straight Press to Male Thread 20x½” Straight Press to Male Thread 20x¾” Straight Press to Male Thread 25x¾” Straight Press to Male Thread 25×1″ Straight Press to Male Thread 32×1″ Straight Press to Male Thread 32×1¼” Straight Press to Male Thread 40×1¼” Straight Press to Male Thread 50×1½” Straight Press to Male Thread 63×2″

Pack Qty Price Each

£5.10

£7.04

£6.84

£7.67

£9.66

£12.58

£14.30

£22.49

£27.32

£39.74

£69.42

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

MAINCOR PRICE LIST FEBRUARY 2024

METAL FITTINGS (Continued)

Straight Press to Female Connector

Maincor Straight Press to Female BSP Connectors are used to connect MLCP to a wide variety of system components. The Female thread is a BSP connection and is also used in conjunction with plumbers’ fittings to achieve final connections.

Part No. PM16F1 PM16F2 PM20F1 PM20F2 PM25F2 PM25F3 PM32F3 PM32F4 PM40F4 PM40F5 PM50F5 PM63F6

Description Straight Press to Female Thread 16x½” Straight Press to Female Thread 16x¾” Straight Press to Female Thread 20x½” Straight Press to Female Thread 20x¾” Straight Press to Female Thread 25x¾” Straight Press to Female Thread 25×1″ Straight Press to Female Thread 32×1″ Straight Press to Female Thread 32×1¼” Straight Press to Female Thread 40×1¼” Straight Press to Female Thread 40×1½” Straight Press to Female Thread 50×1½” Straight Press to Female Thread 63×2″

Pack Qty 10 10 10 10 10 10 5 5 1 1 1 1

Price Each £6.67 £6.52 £8.08 £8.20 £9.93
£18.26 £20.22 £24.74 £27.32 £33.53 £38.50 £56.74

Straight Press to Female Thread Connector (Swivel)

Maincor Straight Press to Female Thread Connectors with a swivel nut are used to connect MLCP to a wide variety of system components.

Part No. SPM16F1 SPM16F2 SPM20F1 SPM20F2 SPM25F3 SPM32F4

Description

Pack Qty

Straight Press with Female Thread Connector (Swivel) 16x½” FT 10

Straight Press with Female Thread Connector (Swivel) 16x¾” FT 10

Straight Press with Female Thread Connector (Swivel) 20x½” FT 10

Straight Press with Female Thread Connector (Swivel) 20x¾” FT 10

Straight Press with Female Thread Connector (Swivel) 25×1″ FT 10

Straight Press with Female Thread Connector (Swivel) 32×1¼” FT 5

Price Each £10.09 £11.48 £12.35 £13.68 £15.53 £26.47

45° and 90o Press Elbows

Maincor Press Elbows 45° and 90o are used to achieve a tight bend, where a radius bend would be unachievable or undesirable.

Part No. PG1616 PG2020 PG2525 PG3232 PG4040 PG4040-45 PG5050 PG5050-45 PG6363 PG6363-45

Description 90° Press Elbow 16mm 90° Press Elbow 20mm 90° Press Elbow 25mm 90° Press Elbow 32mm 90° Press Elbow 40mm 45° Press Elbow 40mm 90° Press Elbow 50mm 45° Press Elbow 50mm 90° Press Elbow 63mm 45° Press Elbow 63mm

Pack Qty 10 10 10 5 1 1 1 1 1 1

Price Each £6.24 £8.44
£13.87 £20.26 £32.91 £48.57 £36.71 £62.61 £83.06 £157.59

Press Elbow to Male Thread Connector

Maincor Press Elbow to Male BSP connectors are to be used when a 90o elbow is required when joining to a BSP connection.

Part No. PG16M1 PG20M1 PG20M2 PG25M2 PG25M3 PG32M3

Description Press Elbow to Male Thread Connector 16x½” Press Elbow to Male Thread Connector 20x½” Press Elbow to Male Thread Connector 20x¾” Press Elbow to Male Thread Connector 25x¾” Press Elbow to Male Thread Connector 25×1″ Press Elbow to Male Thread Connector 32×1″

Pack Qty 10 10 10 10 10 5

Price Each £7.82
£10.71 £11.22 £14.67 £15.58 £21.01

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

MAINCOR PRICE LIST FEBRUARY 2024

METAL FITTINGS (Continued)

Press Elbow to Female Thread Connector

Maincor Press Elbow to Female Thread connectors are to be used when a 90o elbow is required when joining to a BSP connection.

Part No.
PG16F1 PG20F1 PG20F2 PG25F2 PG25F3 PG32F3

Description
Press Elbow to FemaleThread Connector 16x½” Press Elbow to FemaleThread Connector 20x½” Press Elbow to FemaleThread Connector 20x¾” Press Elbow to FemaleThread Connector 25x¾” Press Elbow to FemaleThread Connector 25×1″ Press Elbow to FemaleThread Connector 32×1″

Pack Qty Price Each

£7.52

£9.89

£12.06

£14.80

£16.26

£25.06

Press Wall Plate Elbow

Maincor Press Wall Plate Elbows allow an outside tap or other similar connection to be piped in MLCP and adapts to a ½” or ¾”Female thread.

Part No.
PS16F1 PS20F1 PS20F2

Description
Press Wall Plate Elbow 16x½” FT Press Wall Plate Elbow 20x½” FT Press Wall Plate Elbow 20x¾” FT

Pack Qty Price Each

£12.68

£14.23

£17.17

Press Stop End

Maincor Press Stop Ends are used for quickly and permanently blanking Maincor MLCP.

Part No.
SE16 SE20 SE25 SE32

Description
Press Stop End 16mm Press Stop End 20mm Press Stop End 25mm Press Stop End 32mm

Pack Qty Price Each

£3.79

£4.42

£8.15

£11.17

Radiator Connection Elbows

Maincor Radiator Connection Elbows, by a simple press connection, give an enhanced and professional appearance to pipework on show.

Part No.
CRAD01 CRAD02 CRAD02CU CRAD04

Description
Chrome Press Elbow 12x15x75mm Chrome Press Elbow 16x15x300mm Copper Press Elbow 16x15x300mm Chrome Press Elbow 16x15x50mm

Pack Qty Price Each

£14.59

£20.13

£18.63

£15.52

Press to Copper Compression Tail

Press to Copper Compression Tail are used to connect MLCP fittings to standard copper compression fittings to enable simple system connection. The Press to Copper Compression Tails are not for use with copper press or soldered fittings.

Part No.
MLCPCL01 MLCPCL02 MLCPCL03 MLCPCL04 MLCPCL05

Description

Pack Qty Price Each

16x15mm Press to Copper Compression Tail – Tail length 30mm 10 20x22mm Press to Copper Compression Tail – Tail length 30mm 10 25x22mm Press to Copper Compression Tail – Tail length 30mm 10 25x28mm Press to Copper Compression Tail – Tail length 30mm 10 32x28mm Press to Copper Compression Tail – Tail length 30mm 5

£7.92 £10.42 £12.23 £20.85 £23.00

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

MAINCOR PRICE LIST FEBRUARY 2024

COMPOSITE PRESS FITTINGS

Scan here to see an installation video

Equal Press Tee / Reducing Press Tee

C A
B

Impress Press Tee Fittings are used to branch off main distribution pipework, allowing effective distribution to multiple services.

Equal Press Tee

Part No.

Description A x B x C

Carton Pack Qty Price Each

CPT16X3 CPT20X3 CPT25X3 CPT32X3

Composite Press Tee 16x16x16mm Composite Press Tee 20x20x20mm Composite Press Tee 25x25x25mm Composite Press Tee 32x32x32mm

£6.08

£9.11

£15.53

£24.69

Reducing Press Tee

Part No.

Description A x B x C

CPTR626 CPTR226 CPTR262 CPTR266 CPTR565 CPTR323 CPTR353 CPTR355 CPTR522 CPTR525

Composite Press Tee 16x20x16mm Composite Press Tee 20x20x16mm Composite Press Tee 20x16x20mm Composite Press Tee 20x16x16mm Composite Press Tee 25x16x25mm Composite Press Tee 32x20x32mm Composite Press Tee 32x25x32mm Composite Press Tee 32x25x25mm Composite Press Tee 25x20x20mm Composite Press Tee 25x20x25mm

Carton
45 30 30 45 20 15 10 15 20 20

Pack Qty Price Each

£8.45

£11.81

£21.64

£22.07

£21.72

£10.98

£13.85

Press Coupler / Press Reducer

Impress Straight Press Couplers / Reducers are used where straight lengths in excess of 5m are required. By utilising the straight press fitting, multiple 5m lengths can be coupled together, giving the desired installation length.

Part No.
CPM1616 CPM2020 CPMR206 CPM2525 CPMR256 CPMR252 CPM3232 CPMR323

Description
Composite Press Coupler 16x16mm Composite Press Coupler 20x20mm Composite Press Reducer 20x16mm Composite Press Coupler 25x25mm Composite Press Reducer 25x16mm Composite Press Reducer 25x20mm Composite Press Coupler 32x32mm Composite Press Reducer 32x25mm

Carton
120 80 45 45 60 45 30 30

Pack Qty Price Each

£3.58

£4.80

£4.37

£7.37

£6.80

£7.00

£12.06

£11.57

90° Press Elbow

Impress 90o Press Elbows are used to achieve a tight bend, where a radius bend would be unachievable or undesirable.

Part No.
CPG1616 CPG2020 CPG2525 CPG3232

Description
Composite Press Elbow 16mm Composite Press Elbow 20mm Composite Press Elbow 25mm Composite Press Elbow 32mm

Carton
80 60 30 20

Pack Qty Price Each

£4.50

£5.62

£7.96

£12.36

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

MAINCOR PRICE LIST FEBRUARY 2024

ADDITIONAL FITTINGS AND ACCESSORIES

Scan here to see a Multi-Fit installation video

MLC Press to Copper Press Connectors

Use for making a press to press connection of MLCP and copper. The correct pressing jaws must be used for both the MLCP and copper connections. The fittings are not suitable for use with soldered fittings. The unplated version is also suitable for use with copper compression and pushfit fittings.

Part No.
MLCPCP01 MLCPCP02 MLCPCP03 MLCPCP05 71810050U 71810100U 71830050U 71850050U

Description
16x15mm Press Connector – 90mm Plated 20x22mm Press Connector – 90mm Plated 25x22mm Press Connector – 90mm Plated 32x28mm Press Connector – 90mm Plated 16x15mm Press Connector – 50mm Unplated 16x15mm Press Connector – 290mm Unplated 25x22mm Press Connector – 50mm Unplated 32x28mm Press Connector – 50mm Unplated

Pack Qty
10 10 10
5 10 10 10
5

Price Each
£13.80 £21.11 £24.23 £31.95 £13.04 £18.01 £20.24 £28.69

Compression Connectors
Suitable for 10mm, 15mm, 22mm and 28mm, Maincor Compression Connectors are the simple, easy way to connect MLCP to copper compression fittings and a wide range of valves, radiator connections and threads with a straight BSP connector.

Brass for plumbing and chrome for radiators
White Pipe Clip

Part No.
COMP02C COMP03B COMP03C COMP04B COMP05B

Description
12x15mm Compression Connector (Chrome) 16x15mm Compression Connector (Brass) 16x15mm Compression Connector (Chrome) 20x22mm Compression Connector (Brass) 25x28mm Compression Connector (Brass)

Pack Qty
10 10 10 10 10

Price Each
£9.01 £4.21 £4.93 £8.34 £18.14

White pipe clip with self-closing clamp for a fast and easy installation.

Part No.
WPC16 WPC20 WPC25 WPC32 WPC40 WPC50 WPC63

Description
White Pipe Clip 16mm White Pipe Clip 20mm White Pipe Clip 25mm White Pipe Clip 32mm White Pipe Clip 40mm White Pipe Clip 50mm White Pipe Clip 63mm

Pack Qty
100 50 50 50 25 15 15

Price Each
£0.85 £1.11 £1.37 £2.22 £2.93 £3.59 £3.91

Maincor Multi-Fit Straight Connectors
Maincor Multi-Fit Straight Connectors are a simple and effective way of connecting MLCP and plastic pipes to potable plumbing systems, heating, underfloor heating, kitchen and bathroom appliances.

Part No.
MFT1612 MFT1634 MFT2012 MFT2034 MFT2534 MFT2510 MFT3210

Description
Multi-Fit Straight Connector 16mm x ½” Multi-Fit Straight Connector 16mm x ¾” (Eurocone) Multi-Fit Straight Connector 20mm x ½” Multi-Fit Straight Connector 20mm x ¾” (Eurocone) Multi-Fit Straight Connector 25mm x ¾” (Eurocone) Multi-Fit Straight Connector 25mm x 1″ Multi-Fit Straight Connector 32mm x 1″

Pack Qty
20 20 15 15 10 10 10

Price Each
£3.29 £6.32 £6.34 £6.97 £8.45 £12.54 £16.83

Press Ball Valves

Full bore Ball Valve assembled and sealed with Maincor press fittings. Sizes range from 16-32mm, available with either red or blue lever handle.

Part No.
PBV16R PBV16B PBV20R PBV20B PBV25R PBV25B PBV32R PBV32B

Description
16mm Press Ball Valve (Red handle) 16mm Press Ball Valve (Blue handle) 20mm Press Ball Valve (Red handle) 20mm Press Ball Valve (Blue handle) 25mm Press Ball Valve (Red handle) 25mm Press Ball Valve (Blue handle) 32mm Press Ball Valve (Red handle) 32mm Press Ball Valve (Blue handle)

Pack Qty
1 1 1 1 1 1 1 1

Price Each
£32.37 £32.37 £44.61 £44.61 £49.49 £49.49 £66.92 £66.92

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

MAINCOR PRICE LIST FEBRUARY 2024

PLUMBING & HEATING MANIFOLD SYSTEMS

Scan here for more information on manifold plumbing

Plumbing Manifold

Maincor 2 – 4 Port ¾” & 1″ Plumbing Manifolds provide a simple effective modular system, enabling the use
of MLCP with no additional jointing to appliances and hot and cold water services. Manifold pipe connectors not included. Note, the 1″ Plumbing Manifolds have ¾” Eurocone outlets and ¾” Manifolds have ½” outlets.
Manifold Pipe Connectors are not included (see below).

Part No.
DM3402 DM3403 DM3404 DM0102 DM0103 DM0104

Description
2 Port Plumbing Manifold ¾” x ½” (Single) 3 Port Plumbing Manifold ¾” x ½” (Single) 4 Port Plumbing Manifold ¾” x ½” (Single) 2 Port Plumbing Manifold 1″x ¾” (Single) 3 Port Plumbing Manifold 1″x ¾” (Single) 4 Port Plumbing Manifold 1″x ¾” (Single)

Pack Qty
1 1 1 1 1 1

Price Each
£24.32 £34.61 £48.79 £25.60 £37.16 £50.56

Manifold Pipe Connectors

Maincor manifold pipe connectors join 16 & 20mm MLC pipework to the manifold.

Part No.
TPA1612 EUR16 EUR20

Description
½” x 16 x 2mm MLC Manifold Pipe Connector ¾” x 16 x 2mm MLC Manifold Pipe Connector ¾” x 20 x 2.25mm MLC Manifold Pipe Connector

Pack Qty Price Each

£4.35

£4.27

£5.26

Blanking Plugs and End Caps

Maincor Blanking Plugs and End Caps are used for sealing the end of the Plumbing Manifold.

Part No.
DMBP34F DMBP34M DMBP01F DMBP01M

Description
Brass End Cap ¾” Female Thread Blanking Plug ¾” Male Thread Brass End Cap 1″ Female Thread Blanking Plug 1″ Male Thread

Pack Qty
1 1 1 1

Price Each
£3.17 £4.19 £5.35 £5.54

Manifold Brackets

Pre Assembled Manifold Brackets for use with ¾” & 1″ Plumbing Manifold.

Part No. DMBK3401

Description Plumbing Manifold Bracket (pair) ¾” – 1″

Pack Qty Price Each

£19.87

Straight Ball Valve – Plumbing

WRAS approved straight ball valves with union connector, used to provide isolation of Plumbing Manifolds and other applications for potable water.

Part No.
T50903001 T50903002

Description

Pack Qty Price Each

¾” x ¾” Straight Ball Valve with Union – Plumbing (single) 1″ x 1″ Straight Ball Valve with Union – Plumbing (single)

£22.85

£26.40

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

MAINCOR PRICE LIST FEBRUARY 2024

PLUMBING & HEATING MANIFOLD SYSTEMS (Continued)

Radiator Manifold

The Maincor range of 2 – 12 Port Radiator Manifolds offer complete safety and control. Electronically controlled by either wired or radio thermostats, the manifold removes the need for TRVs, offering accurate individual room control when used in conjunction with programmable or non-programmable thermostats. Fitting free MLCP from the manifold to the radiator removes the need for joints under a floor or over a ceiling, vastly reducing the risk of leaks. Requires pipe connectors and 1″ ball valves, both are sold separately (see below).

Part No.
RM02-04 RM03-04 RM04-04 RM05-04 RM06-04 RM07-04 RM08-04 RM09-04 RM10-04 RM11-04 RM12-04

Description
2 Port Radiator Manifold – Inlet 1″x ¾” outlet 3 Port Radiator Manifold – Inlet 1″x ¾” outlet 4 Port Radiator Manifold – Inlet 1″x ¾” outlet 5 Port Radiator Manifold – Inlet 1″x ¾” outlet 6 Port Radiator Manifold – Inlet 1″x ¾” outlet 7 Port Radiator Manifold – Inlet 1″x ¾” outlet 8 Port Radiator Manifold – Inlet 1″x ¾” outlet 9 Port Radiator Manifold – Inlet 1″x ¾” outlet 10 Port Radiator Manifold – Inlet 1″x ¾” outlet 11 Port Radiator Manifold – Inlet 1″x ¾” outlet 12 Port Radiator Manifold – Inlet 1″x ¾” outlet

Pack Qty Price Each
1 £133.97 1 £180.24 1 £220.88 1 £262.52 1 £302.56 1 £345.67 1 £387.91 1 £427.54 1 £466.03 1 £504.71 1 £544.24

Manifold Pipe Connector

Maincor manifold pipe connectors join 12, 16 & 20mm MLC pipework to the manifold.

Part No.
EUR1216 EUR16 EUR20

Description
12 x 1.6mm MLC Manifold Pipe Connector – ¾” 16 x 2mm MLC Manifold Pipe Connector – ¾” 20 x 2.25mm MLC Manifold Pipe Connector – ¾”

Pack Qty
1 1 1

Price Each
£6.21 £4.27 £5.26

Blanking Cap

Maincor Blanking Caps are used to blank-off 3/4″ outlets on the Plumbing, Radiator or Underfloor Heating Manifolds.

Part No. DMBP34F

Description Brass Blanking Cap ¾” Female Thread

Pack Qty Price Each

£3.17

Straight Ball Valve

Part No. 50903002

Description

Pack Qty Price Each

1″ x 1″ Straight Ball Valve with Union – Heating (single)

£19.36

Compact Filter

The Compact Filter removes impurities that can be found within the water of a heating system. The elimination of these particles, maintains high system efficiency and reduces the probability of malfunctioning. It is recommended in existing and new domestic systems, where a filter is not currently installed.

Part No. TF-01

Description
Compact Filter (¾” FI connections) complete with Drain Valve

Pack Qty Price Each 1 £105.48

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

MAINCOR PRICE LIST FEBRUARY 2024

TOOLS
Bevelling Tool
60953220*
Pipe Cutting Tool

A range of tools for bevelling Maincor MLCP prior to inserting fittings. (Product shown 60953220*)

Part No.
60953220 60953211 60953217 60953218 60953219 60953213 60953214 60953215 60953216

Description
3 Size Bevelling Tool 16/20/25mm Bevelling Tool 12mm Bevelling Tool 16mm Bevelling Tool 20mm Bevelling Tool 25mm Bevelling Tool 32mm Bevelling Tool 40mm Bevelling Tool 50mm Bevelling Tool 63mm

Pack Qty
1 1 1 1 1 1 1 1 1

Price Each
£51.78 £60.98 £25.37 £31.71 £38.05 £53.27 £58.59 £63.93 £69.15

Maincor Pipe Cutting Tool for use with Maincor MLCP in sizes 12-32mm.

Part No. AX1

Description Pipe Cutting Tool (12-32mm)

Pack Qty Price Each

£24.10

Pipe Cutting Tool
60950010*

For the professional where speed matters, a faster Cutting Tool for use with Maincor MLCP, with a range of cutters up to 63mm. (Product shown 609500010*)

Part No.
60950010 60950011 60950013

Description
Pipe Cutting Tool (12-20mm) as shown Pipe Cutting Tool (16-32mm) rachet type Pipe Cutting Tool (12-63mm) disc type

Pack Qty Price Each

£99.91

1 £133.19

Internal Bending Spring

Maincor Internal Bending Springs can be used to form an accurately curved bend for the parts of the installation that are visible.

Part No.
IB0012 IB0016 IB0020 IB0025 IB0032

Description
12mm Internal Bending Spring 16mm Internal Bending Spring 20mm Internal Bending Spring 25mm Internal Bending Spring 32mm Internal Bending Spring

Pack Qty Price Each

£7.93

£5.80

£6.62

£8.96

£10.56

External Bending Spring

Maincor External Bending Springs can be used to form an accurately curved bend for the parts of the installation which will be visible.

Part No.
EB0016 EB0020 EB0025 EB0032

Description
16mm External Bending Spring 20mm External Bending Spring 25mm External Bending Spring 32mm External Bending Spring

Pack Qty Price Each

£7.13

£7.93

£8.58

£10.84

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

MAINCOR PRICE LIST FEBRUARY 2024

TOOLS (Continued)

Mini Pressing Tool & Accessories

Maincor Battery operated Mini Pressing Tool suitable for pressing fittings from 16-40mm. The tool is supplied with a rechargeable battery and a charger. Press jaws are supplied separately (see below).

Part No. 60953006

Description Mini Pressing Tool (16-40mm)

Pack Qty Price Each 1 £1,531.64

Jaws, charger and additional battery for Maincor Mini Pressing Tool.

Part No.
60953171 60953172 60953173 60953174 60953175 60953007 60952202

Description
16mm Mini Press Jaw 20mm Mini Press Jaw 25mm Mini Press Jaw 32mm Mini Press Jaw 40mm Mini Press Jaw Replacement Battery for Mini Pressing Tool Spare Charger

Pack Qty
1 1 1 1 1 1 1

Price Each
£152.09 £152.09 £157.04 £157.04 £256.25 £144.38 £173.14

Pressing Tool & Accessories

Maincor Battery operated Pressing Tool suitable for pressing fittings from 16-63mm. The tool is supplied with a rechargeable battery and a charger. Press jaws are supplied separately (see below).

Part No. 60952200

Description Pressing Tool (16-63mm)

Pack Qty Price Each 1 £2,204.65

Jaws, charger and additional battery for Maincor Pressing Tool.

Part No.
60953001 60953002 60953003 60953004 60953005 60953008 60953009 60952201 60952202

Description
16mm Press Jaw 20mm Press Jaw 25mm Press Jaw 32mm Press Jaw 40mm Press Jaw 50mm Press Jaw 63mm Press Jaw Replacement Battery for Pressing Tool Spare Charger

Pack Qty
1 1 1 1 1 1 1 1 1

Price Each
£135.50 £135.50 £135.50 £135.50 £256.25 £269.57 £1,286.59 £193.14 £173.14

Manual Pressing Tool & Accessories

Maincor Manual Pressing Tool suitable for pressing 16 & 20mm press fittings. Press jaws are supplied separately (see below).

Part No. MP20

Description Manual Pressing Tool

Pack Qty Price Each 1 £439.08

Inserts for Maincor Manual Pressing Tool.

Part No.
MPR16 MPR20

Description
16mm Inserts for Manual Pressing Tool 20mm Inserts for Manual Pressing Tool

Pack Qty Price Each

£60.98

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

MAINCOR PRICE LIST FEBRUARY 2024

TOOLS (Continued)

Multi-Fit Tool

Maincor Multi-Fit Tools are for use with 16-32mm Multi-Fit fittings. Alternatively, allen keys can be used to make connections (10mm, 14mm & 19mm).

Part No. MFT-TOOL

Description Multi-Fit Tool

Pack Qty Price Each

£24.73

Pipe Staple Gun

Maincor Pipe Staple Guns are used for ease of installation and provide fast effective pipe fixing.

Part No. PSGUN-04

Description Pipe Staple Gun

Pack Qty Price Each 1 £288.99

Pipe De-Coiler

Maincor Pipe De-Coilers are for use with Maincor MLCP coils. They can be used with pipe of up to 25mm diameter and a maximum coil length of 500m.

Part No. 60950051

Description Pipe De-Coiler

Pack Qty Price Each 1 £599.34

Manifold Spanner

Maincor Manifold Spanner 24 & 27mm.

Part No. TSPAN

Description Manifold Spanner 24 & 27mm

Pack Qty Price Each

£17.65

Pressure Test Plug

Maincor re-usable Pressure Test Plugs should be used to test Maincor MLCP.

Part No.
TP0016 TP0020 TP0025 TP0032

Description
16mm Pressure Test Plug 20mm Pressure Test Plug 25mm Pressure Test Plug 32mm Pressure Test Plug

Pack Qty Price Each

£4.76

£5.27

£5.92

£10.36

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

MAINCOR PRICE LIST FEBRUARY 2024

SPARES AND ACCESSORIES

A range of spares and accessories to compliment our systems. For Underfloor Heating Manifolds bought prior to September 2020, use the following spares:

For Underfloor Heating Manifolds bought after September 2020, use the following spares:

Pump Pack spares:

Service kits available
please contact office to check
suitability

Pipe Repair Kits:

Image Ref
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Part No.
AV01 LK01 AP01 FD01 PGKIT TUCS01 TAP01 TLK01 TFD01 TPGKIT MATEMP PUMP150 PUMP250 SKITV1 / SKITV2 CPMV150 RFK16M RFK16P RFK12P MEK

Description

Pack Qty

Auto Air Vent

Lockshield Kit with Flow Meter

Actuator Pin

Fill/Drain Valve

Press Gauge & Connector

1″ Union Connection with Swivel Nut and O-Ring Seal for Manifolds 1

Actuator Pin

Flow Meter

Fill/Drain Valve

Press Gauge & Connector

Temperature Gauge fo CP150A

`A` Rated Pump for CP150A

`A` Rated Pump for CP250

Service Kits

Mixing Valve for CP150A

Pipe Repair Kit 16mm x 2mm MLCP

Pipe Repair Kit 16mm x 2mm PE-RT

Pipe Repair Kit 12mm x 1.3mm PE-RT

Single Port Manifold Extension Kit

Price Each
£8.64 £11.29 £10.63 £13.95 £26.58 £14.35 £10.43 £14.35 £13.95 £26.58 £23.92 £239.19 £265.76 £70.00 £265.76 £12.90 £13.29 £19.13 £52.23

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

MAINCOR PRICE LIST FEBRUARY 2024

PRE-INSULATED PIPE SYSTEMS

Austroflex Pre-Insulated Pipe Systems

Fast Installation, Low Heat Loss & Diffusion Barrier

We are pleased to have partnered with Austrian manufacturer Austroflex, to supply the
AustroPUR and AustroPEX ranges of pre-insulated pipes suitable for heating, sanitary and cold water applications available in single, twin and quad pipe configurations.

The low heat loss of both types of Austroflex pipe, means that hot water or heating water can be
supplied into the buildings from the heat source maintaining the water temperature, ensuring a high level of energy efficiency, and saving money on running costs for the end user.

The corrugated outer casing has a built-in diffusion barrier, to maintain the heat retention efficiency of the pipe system throughout its entire service life.

The product’s improved flexibility stems from a unique combination of the new corrugated outercasing and a newly formulated softer cellular insulation foam. The pipe systems are simple and fast to install with the small bend radius making them ideal for use in projects with curves, or with a high number of obstacles on site.
Find out more at www.maincor.co.uk or call us on 01455 555930.

Product Features
· The Corrugated Outer Case allows for a tight bending radius for fast installation
· Diffusion Barrier built into the outer casing ensures the insulation properties remain constant over the entire life of the pipe
· Improved Insulation Foam low heat losses improve energy efficiency and system performance
· Self-compensating Design (bonded pipe system) eliminates any need for expansion fittings
· The pipe is Marked Every Metre to help plan runs on site
· No Specialist Tools are required for the joints
· Pipe is available for Hot Water and Heating Applications · The fittings are High Quality DZR Brass and fittings 32mm and
over include two bolts – one for opening the fitting and one for tightening it on to the pipe, for ease of installation

Installation Features
· Customised Lengths – Pipe can be cut to length to suit your project requirements, minimising waste
· Easy Roll Out – The coils are easy to unroll by hand
· Hand Tools Only – No specialist tools are required · Easy Building Entry Fixtures – Easy to install fittings makes
it simple to connect the pipe to the building’s heating and water systems
· Long Lengths – Coil configurations are available up to 340m depending on pipe size

These items are the most popular used for `A to B` runs when remotely siting a heat pump or boiler :

Product Description
AustroPUR Twin Heating Pipe (6 Bar) 125mm outer casing 25mm x 10 metres + 4 Fittings 25mm x 3/4″ + 2 End Caps 25mm x 15 metres + 4 Fittings 25mm x 3/4″ + 2 End Caps 25mm x 20 metres + 4 Fittings 25mm x 3/4″ + 2 End Caps

Product Code
PIP2510 PIP2515 PIP2520

Pack Price
TBA TBA TBA

32mm x 10 metres + 4 Fittings 32mm x 1″ + 2 End Caps 32mm x 15 metres + 4 Fittings 32mm x 1″ + 2 End Caps 32mm x 20 metres + 4 Fittings 32mm x 1″ + 2 End Caps

PIP3210

TBA

PIP3215

TBA

PIP3220

TBA

We offer the full range of pre-insulated pipes and for any requirements not covered by these packs, please email project details to : quotations@maincor.co.uk

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

TERMS & CONDITIONS

1 – Definitions In these Terms and Conditions:Company means Maincor Ltd, Elizabethan Way, Lutterworth, LE17 4ND or any other Maincor company. Buyer means any customer, company or person ordering Goods and/or Services of the Company and whose order for the Goods and/or Services is accepted by the Company. Conditions means the Terms and Conditions set out herein. Contract means the Contract for the sale of Goods and/or services to be provided by the Company pursuant to the Contract. Goods means the Goods and/or Services the Company agrees to supply. Notice/Writing includes facsimile transmission, email and other comparable means of communication sent to the other party at its registered office or principal place of business. Order means a request in writing from the Buyer to the Company to supply any of the Company’s Goods and/or Services.
2 -Application a) Any Goods and/or Services supplied by the Company shall be made exclusively on the basis of and subject to the Terms and Conditions set out below. b) No addition to, or variation of these Terms and Conditions shall bind the Company unless agreed in writing and signed by a director of the Company. No agent or person employed by the Company has any authority to alter or vary in any way these Terms and Conditions except as stated above. If such variation is accepted by the Company in writing, these Terms and Conditions shall continue to apply as if that variation were incorporated into these Terms and Conditions. c) Any typographical, clerical or other error or omission in any sales literature, quotation, price list, acceptance of offer, invoice or other document or information issued by the Company shall be subject to correction without liability on the part of the Company.
3 – Acceptance of Orders a) No order submitted by the Buyer is accepted by the Company unless confirmed in Writing by the Company or delivery of the Goods and/or Services is made by the Company. b) The Buyer shall be responsible to the Company for ensuring the accuracy of any order submitted by the Buyer to the Company and for giving the Company any necessary information relating to the order within sufficient time to enable the Company to perform the Contract in accordance with its Terms and Conditions. c) The quantity, quality and description of and any specification for the Goods and/or services are those set out in the Company’s quotation or the Buyers order (to the extent accepted by the Company). d) If the Company accepts any request by the Buyer to supply any Goods and/or Services other than those specifically referred to in the Company’s current price list then the Buyer shall indemnify the Company against all losses, damages, costs etc incurred by the Company in connection with any claim for infringement of any patent, copyright, design, trademark or other intellectual property rights. The Company gives no warranty that any Goods and/or Services supplied on this basis will be fit for their intended purpose. e) The Company may make any changes in the specification of the Goods and/or Services which are required to conform with any applicable statutory or EC requirements or which do not materially affect their quality or performance. f) No Order which has been accepted by the Company may be cancelled by the Buyer without the written agreement of the Company and the Buyer undertakes to pay all costs, charges and expenses incurred by the Company for any or all work carried out by the Company prior to cancellation. g) All drawings, designs, specifications, quotations and other information provided by the Company are confidential and all rights of copyright and other intellectual property rights in their respect shall remain the property of the Company and shall not pass to the Buyer. h) All descriptions, specifications, drawings and particulars of layouts and dimensions submitted by the Company are deemed approximate only and descriptions and illustrations in the Company’s catalogues, price lists and other advertising matter shall not form any part of a contract. i) All goods must be ordered by the Buyer in the packed quantities as shown in the current price lists of the Company.
4 – Delivery and Prices a) The price of the Goods and/or Services shall be at the price specified in the Company’s confirmation of order or, if none, at the price in the Company’s current published price list at the date of supply of the Goods and/or Services. Any quoted prices other than those published in the Company’s current price list shall be non binding upon the Company unless a fixed quotation is agreed in writing and signed by a director of the Company. b) All prices are subject to increase to reflect variations from time to time in costs which are due to any factor beyond the control of the Company (including but not limited to costs of materials, labour, transport, currency fluctuation and any tax, fees or charges imposed by the Government or other authority) or any change in delivery dates, quantities specifications given by the Buyer or any failure of the Buyer to give the Company adequate information or instructions. c) All prices are given by the Company on an ex works basis and exclude VAT and any other duties applicable and the Buyer shall be liable to pay those duties and (subject to condition i) the Company’s charges for transport, packaging and insurance. d) Dates of delivery and deadlines quoted by the Company are deemed approximate unless explicitly agreed in writing by the Company and the time for delivery shall not be of the essence unless specifically previously agreed by the Company in writing. e) The Company is entitled to make delivery by instalments against any order it accepts from the Buyer and these Terms and Conditions shall apply to each instalment delivery and any claim by the Buyer in respect of any one or more of the instalments shall not entitle the Buyer to treat the Contract as a whole as repudiated. f) If the Company failed to deliver the Goods (or any instalment) for any reason other than any cause beyond the Company’s reasonable control, or the Buyers fault and the Company is accordingly liable to the Buyer, the Company’s liability shall be limited to the excess over the Company’s price of the Goods (if any) of the cost to the Buyer (in the cheapest available market) of similar Goods to replace those not delivered. g) If the Buyer fails to take delivery of the Goods or fails to give the Company adequate delivery instructions at the time stated for delivery then without limiting or any other right or remedy available to the Company, the Company may:
i) Store the goods until actual delivery and charge the Buyer for the reasonable costs (including insurance of storage)
ii) Sell the Goods at the best price readily obtainable and (after deducting all reasonable storage and selling expenses) account to the Buyer for the excess over the price under the Contract or charge the Buyer for any shortfall below the price under the Contract.
h) The mode of transport or delivery shall be at the Company’s discretion. For deliveries outside UK, the Company shall be entitled to charge all additional delivery costs to the Buyers account. i) The Buyer shall be liable to pay delivery charges where:
i) The Company’s net invoice value (excluding VAT and delivery) is under £300.00 ii) The Goods are specified by the Buyer as being required for next day receipt,
whether delivery is to the Buyer or any third party address stipulated by the Buyer. iii) The Goods are requested by the Buyer to be delivered to a site address, whether for next day
receipt or not. iv) Any alteration to clause i) must be agreed and confirmed by the Company in writing. j) Goods must be carefully examined on delivery and acceptance thereof duly signed for by the Buyer or his appointed agent will be deemed to constitute acceptance by the Buyer of receipt of the Goods in good condition and conformity in all aspects with the order. k) i) Unless otherwise agreed in writing by the Company all prices specified by the
Company exclude the cost of packing. Any necessary packaging material shall be invoiced at cost price and shall not be taken back.

ii) The Buyer will dispose of all packaging materials in accordance with the regulations (statutory or otherwise) relating to the protection of the environment.
iii) The Company shall use all reasonable endeavours to ensure, where necessary, the appropriate packaging is used for despatch, but shall not be liable for any damage or loss of Goods between despatch and delivery to the Buyer.
5 – Terms of Payment a) Unless the Company specifies in writing (signed by a director of the Company or other person authorised by a director) the Buyer shall pay all invoices in full, without any set off, deduction or counter claim, no later than the last business day of the month following the date of the invoice and the time of payment shall be of the essence of the Contract. b) If the Buyer fails to make any payment by the due date, the Company may suspend any further deliveries to the Buyer and at the Company’s discretion, interest will be charged at 4% over the base rate of HSBC bank from the date payment was due until and including the date of the actual payment. c) If the Buyer issues a cheque which is not honoured on presentation, or if the Company deems it necessary to arrange special presentation of a cheque, the Company reserves the right to debit the Buyer with the cost of doing so. d) If the Buyer does not meet the Conditions of payment, or in the case of reasonable doubts about the Buyers credit worthiness or the Buyer makes any voluntary arrangement with its creditors, becomes bankrupt, becomes subject of an administration order, or goes into liquidation, the Company may cancel any outstanding contract with the Buyer and all outstanding invoices on the Buyers account with the Company will become due.
6 – Risk and Property a) The title to all Goods supplied by the Company shall remain with the Company (retained Goods) until such time that cash or cleared funds have been received by the Company in full for those Goods, and all other Goods for which payment is then due, together with any costs incurred by the Company in attaining such payment. b) The Buyer shall hold the retained Goods as the Company’s fiduciary agent and store them in such a way that they can be easily identified as being owned by the Company and shall ensure that they are fully insured. c) The Buyer has the right to resell the retained Goods in the ordinary course of its business. Rights to pledge, use as collateral or to lend the retained Goods are specifically excluded. d) The Buyer shall be obliged to inform the Company about any deterioration or destruction of the retained Goods immediately and shall furnish all information necessary to protect the Company’s interest against third parties. e) Until such time as title to the Goods passes to the Buyer the Company may at any time require the Buyer to deliver up the Goods to the Company and if the buyer fails to do so, enter upon any premises of the Buyer or any third party where the Goods are stored and repossess the Goods.
7 – Defects and Liability a) Subject to the exclusions set out in 7b below, the Company confirms that the Goods will correspond with their specification at the time of delivery and will be free from defect in material and workmanship from the date of delivery for twelve months. b) The Company shall be under no liability in respect of any defect in the Goods arising from any drawing, design or specification supplied by the Buyer. c) The Company shall be under no liability in respect of any defect arising from fair wear and tear, wilful damage, negligence, abnormal working conditions, failure to follow the Company’s instructions (whether oral or in writing), misuse, or alteration or repair of the Goods without the Company’s written approval. d) The Company shall be under no liability (or any other Warranty, Condition or Guarantee) if the total price for the Goods has not been paid by the due date for payment. e) This liability does not extend to parts, materials or other equipment not manufactured by the Company in respect of which the Buyer shall only be entitled to the benefit of any such warranty or guarantee as is given by the manufacturer to the Company. f) The Company does not warrant the accuracy or otherwise of any design, drawing, specification, instructions, or other information or advice that it provides as part of its Services and/or as ancillary information in relation to the Goods. g) Any claim by the Buyer for any defect in the quality or condition of the Goods must be notified in writing to the Company within 7 days of delivery or if failure was not apparent on reasonable inspection, within a reasonable time after discovery of the defect, but in any event within 6 months of delivery. h) Where the Goods are returned by the Buyer and accepted by the Company as being defective, the Company shall, at its option, either repair or replace such Goods without cost to the Buyer or allow the Buyer a credit on his account. The Company shall not be liable to the Buyer for any claim by the Buyer for any work done on or with the Goods, loss of profit, or for any loss, damage or cost to the Buyer whatsoever, other than the replacement cost of the Goods and the Buyer shall not be entitled to withhold payment by reason of an alleged defect. i) Except as expressly provided in these Terms and Conditions all warranties, conditions, and other terms implied by statute or common law are excluded. j) Except in respect of death or personal injury caused by the Company’s negligence, the Company shall not be liable to the Buyer by reason of any representation, or any implied warranty, condition or other term, or any duty at common law under the express terms of the Contract for any consequential loss or damage (whether loss of profit or otherwise), costs, expenses, anticipated profits, or other claims for consequential compensation whatsoever (and whether caused by negligence of the Company or its employees or agents or otherwise) which arise out of or in connection with the supply of the Goods and/or Services of the Company.
8 – Force Majeure The Company shall not be liable to the Buyer to the extent that fulfilment of its obligation to the Buyer has been prevented, hindered or delayed by force majeure as herein defined and without limiting the generality of the foregoing the Company shall be entitled to cancel delivery in whole or in part when it is delayed in or prevented from making delivery by strikes, lock outs, trade disputes or labour troubles or any cause beyond the Company’s control including without limitation Act of God, regulation or request, fire, accident, war, riot, delay in transportation, inability to obtain adequate labour, materials or manufacturing facilities and the Company shall not be bound to obtain in the market Goods with which to replace the Goods, delivery of which has been cancelled as a result of any said events.
9 – General Conditions a) The Company reserves the right to modify or improve any of its products from time to time without any prior notification and such modifications or improvements shall not entitle the Buyer to reject the Goods so improved or modified or any products previously supplied to the Buyer prior to the modification or improvement being affected. b) The Company may perform any of its obligations or exercise any of its rights under these Terms and Conditions through any member of its Group. c) Any person who is not a party to any contract under these Terms and Conditions has no right to enforce any part of these Terms and Conditions. d) Any notice relating to these Terms and Conditions shall be in writing and served or delivered to the other party at its registered office or principal place of business or such other address as may have been notified in writing prior to the party giving notice. e) If any provision in these Terms and Conditions is found by any competent authority to be invalid or unenforceable in whole or in part, the validity of the other provisions of these Terms and Conditions and the remainder of the provision in question shall not be affected. f) No waiver by the Company of any breach of these Terms and Conditions shall be considered as a waiver of any subsequent breach of the same or any other provision. g) The Buyer must not assign any of its rights or obligations under these Terms and Conditions without the prior written consent of the Company. h) The validity, construction and performance of these Terms and Conditions shall be governed by the law of England and be within the exclusive jurisdiction of the English courts. i) These Terms and Conditions shall replace any of the Company’s previous Terms and Conditions.

Tel: 01455 555930 Web: www.maincor.co.uk

Maincor Ltd reserves the right to alter specification without notice.

MAINCOR PRICE LIST FEBRUARY 2024

X (Formerly Twitter)

Instagram

MAINCOR WARRANTY
Maincor pipe systems with press and compression fittings. For a period of ten years Maincor will replace: 1) Maincor pipe systems which demonstrate defects that shall be shown to derive from production or material
defects attributable to the negligence of the manufacturer. 2) Damage caused to the property of third parties by Maincor product defects. 3) The expenses of third parties emanating from the removal, disassembly, acceptance or uncovering of defective
Maincor products and caused by the installation and laying of defective Maincor products delivered by Maincor. The warranty shall extend to all Maincor system parts, such as pipes and fittings, where Maincor has made the delivery.
No liability shall be accepted for pipe laying and installation errors.
Two year warranty applies to all electrical products.
The technical documentation and instructions for use shall be decisive.
Maincor Rohrsysteme GmbH & Co. KG, Silbersteinstrasse14, D-97424, Schweinfurt, Germany
PRODUCT REPLACEMENT GUARANTEE
Maincor pipe systems with press and compression fittings. For a period of fifty years Maincor will replace:
1) Maincor pipe systems which demonstrate defects that shall be shown to derive from production or material defects attributable to the negligence of the manufacturer.
The guarantee shall extend to Maincor system parts, such as pipes and fittings, where Maincor Rohrsysteme were the manufacturer.
No liability shall be accepted for pipe laying and installation errors.
The technical documentation and instructions for use shall be decisive.
Maincor Ltd, Elizabethan Way, Lutterworth, Leicestershire LE17 4ND

Maincor supports and/or is a member of:

Maincor Ltd
Elizabethan Way Lutterworth Leicestershire
LE17 4ND
Phone: 01455 555930 Fax: 01455 555931
Email: enquiries@maincor.co.uk Web: www.maincor.co.uk

ESTABLISHED 2007

2021

Documents / Resources

MAINCOR Underfloor Heating Systems [pdf] Instruction Manual
Underfloor Heating Systems, Heating Systems, Systems

References

User Manual

MAINCOR Underfloor Heating Systems Instruction Manual

Underfloor Heating Systems

Product Information

Specifications

Product Usage Instructions

About Maincor

Why Maincor?

Innovation and Support

Product Range

FAQ

Q: Where can I purchase Maincor products?

Q: How can I get technical support for Maincor products?

Documents / Resources

References

Leave a comment

Cancel reply