LUMINTOP-logo

LUMINTOP GT NANO 3.0 Titanium

LUMINTOP-GT-NANO-3.0-Titanium-product.

Specification

ANSI/NEMA

FL1

Moon-

light

 

Low

 

Med

 

High

 

Turbo

 

Output

1

Lumens

31

Lumens

180

Lumens

400

Lumens

700

Lumens

 

Runtime

 

48h

 

4h

 

SOmin

1M

+45min

1M

+42min

Distance 400m (Max)
 

Intensity

 

40000cd (Max)

 

Impact Resistant

 

1m

 

Waterproof

 

IPXS, underwater 2m

 

Light Source

 

Osram NM1 LED

 

Battery

 

1 X 10280 Li-ion

 

Power

9W(Max)
 

Size

67’2.4 14mm
Net Weight  

27g (battery included)

Notice: The above approximate data are lab-tested with a 10280 Li-ion battery and may vary due to differences in environment and batteries. The runtime on High and Turbo modes is cumulative due to the ovetheat protection feature.

OVERVIEW

LUMINTOP-GT-NANO-3.0-Titanium-fig-2

Operation Instructions

General Modes: low, Medium, High (with mode memory) Hidden Modes: Moonlight, Turbo, Blinking Modes

  1. ON/OFF: Click the switch once.
  2. Output change: While the flashlight is ON, press and hold the switch to cycle through the output levels (Low, Medium, High). Release the switch to select the desired level.
  3. Moonlight: Press and hold the switch from OFF.
  4. Turbo: Quickly double-click the switch.
  5. Blinking Modes: Triple-dick the switch to enter Strobe mode. Another triple-click will change the blinking modes (SOS, Beacon, Strobe).
  6. Lock-out/Unlock: Quadruple-click the switch from OFF. In lock-out mode, momentary ON Is available by pressing the switch.
  7. Switch Backlight ON/OFF: CIiek the switch seven times from OFF to toggle the backlight.

Intelligent Mode Memory Function
The flashlight will remember and recall the last used general output level when turned on again, excluding the blinking modes.

USB-C Charging

  • Rechargeable via a built-in USB-C charging port.
  • Built-in overcharge protection to prevent overcharging.
  • The indicator light is green when the voltage is sufficient and red when the battery is low.
  • The charging indicator is red during charging and turns green once fully charged.
  • After charging is complete, remember to replace the rubber C0\18r to maintain the waterproof capability.

Battery Usage

  • The flashlight operates on a 10280 lithium-ion battery.
  • Recharge the battery promptly when the flashlight dims.
  • Replace the battery if it is damaged or nearing the end of its lifespan.
  • It is recommended to use batteries from Lumintop or another reputable source. Ensure the positive terminal of the battery faces the flashlight’s head during installation.

Multiple Protection Functions

  • Overcharge Protection to prevent damage to the battery from overcharging.
  • Over-discharge protection to prevent damage to the battery from over-discharge.
  • Reverse Polarity Protection to prevent damage to the flashlight from incorrect battery installation or short circuit.
  • Ovemeat Protection: When the flashlight’s temperature is high it will automatically reduce the output to prevent overt”eating and ensure comfortable use.
  • Low Voltage Protection: When the voltage drops, the flashlight will reduce the output and eventually shut down automatically.

Safety & Warnings

  1. Battery Warning: Contains a battery. Do not disassemble, heat above 100 ·c, or incinerate.
  2. Choking Hazard: Contains small parts. Not suitable for children under 3 years old.
  3. This device Is a high-intensity flashlight. To avoid potential injury, do not shine it directly into the eyes.
  4. Do not point the light directly at people, animals, moving vehicles, or flammable materials.
  5. If the flashlight will not be used for an extended period, loosen the threads to disconnect the power or remove the battery to prevent damage from battery leakage.
  6. Properly maintain the battery and charge it every three months to preserve Its performance.
  7. When carrying or storing the flashlight in a backpack or similar, set it to lock-out mode or loosen the threads to disconnect the power to prevent accidental activation and potential inconvenience.

Warranty

  1. 30 Days from Purchase: Free repair or replacement for manufacturing defects.
  2. 5 Years from Purchase: Lumintop will repair products free of charge within 5 years of purchase (2 years for products with a built-in battery, 1 year for the battery) if issues occur under normal use.
  3. lifetime Warranty: After the warranty period, repairs are available for a fee covering parts as needed.
  4. This warranty does not 00\ler normal wear and tear, improper maintenance, abuse, force majeure, or damage caused by human factors.

LUMINTOP-GT-NANO-3.0-Titanium-fig-3

EUBRIDGE ADVISORY GMBH
Virginia Str. 2 35510 Butzbach,Gennany 49-68196989045 eubrldge@outlook.com

WSJ Product LTD
Unit 1 Alsop Arcade l3 5TX brownlowhill Liverpool, Unied Kingdom info02@wsJ-product.com +004407825478124

Made In China
LUMINTOP TECHNOLOGY CO., LTD Address:11 th Floor, Block B , Tianhengda Industrial Park. No.2 Chengxin Road, Longgang District, Shenzhen, China

Documents / Resources

LUMINTOP GT NANO 3.0 Titanium [pdf] User Manual
GT NANO 3.0 Titanium, GT NANO 3.0, Titanium

References

Leave a comment

Your email address will not be published. Required fields are marked *