LumiMe RGB Multi-Color LED Strip User Manual
Features
- Professional gemstone identification flashlights
- GEM8: CREE XP-L HI V3 LED emits a max output of 500 lumens
- GEM10: CREE XP-L HI V3 LED emits a max output of 800 lumens
- GEM8UV: UV light output of 3000mW, wavelength of 365nm
- GEM10UV: UV light output of 3000mW, wavelength of 365nm
- Rotary switch allows infinite variable brightness adjustment
- GEM8/GEM8UV: The LED is attached to lens directly to ensure zero light loss (Patent No.: ZL201620486311.8)
- GEM10/GEM10UV: Crystal Coating Technology combined with “Precision Digital Optics Technology” for unparalleled reflector performance
- GEM8/GEM8UV: Design patent No. : ZL20183001830.7
GEM10/GEM10UV: Design patent No. : ZL201830018136.4 - High efficiency constant circuit provides unwavering output with a max runtime of 500 hours
- Advanced Temperature Regulation module
- Integrated measurement scale
- Toughened ultra-clear mineral glass with anti-reflective coating
- Constructed from aero grade aluminum alloy with HAIII military grade hard-anodized finish
- Waterproof in accordance with IPX8 (2 meters submersible)
- 1m impact resistance
- Tail stand capability
Dimensions
GEM8
- Head Diameter: 0.35” (9mm)
- Tube Diameter: 0.85” (21.5mm)
- Length: 5.47” (139mm)
- Weight: 2.04oz (57.7g)
GEM8UV
- Head Diameter: 0.35” (9mm)
- Tube Diameter: 0.85” (21.5mm)
- Length: 5.47” (139mm)
- Weight: 2.04oz (57.7g)
GEM10
- Head Diameter: 0.63” (16mm)
- Tube Diameter: 0.85” (21.5mm)
- Length: 5.31” (135mm)
- Weight: 2.35oz (66.5g)
GEM10UV
- Head Diameter: 0.63” (16mm)
- Tube Diameter: 0.85” (21.5mm)
- Length: 5.31” (135mm)
- Weight: 2.35oz (66.5g)
Accessories
- 2×spare O-rings
- lanyard
- holster
Battery Options
|
SIZE |
Nominal Voltage |
Compatible |
|
| 18650 Rechargeable Li-ion battery | 18650 | 3.6V/3.7V |
Y (Recommended) |
|
Primary Lithium battery |
CR123 |
3V |
Y (Recommended) |
|
Rechargeable Li-ion battery |
RCR123 |
3.6V/3.7V |
Y |
Technical Parameter
GEM8
|
FL1 STANDARD |
Turbo |
Ultralow |
|
|
500 LUMENS |
1 LUMEN |
 |
*1h |
500h |
|
|
39m |
1m |
 |
380cd |
0.4cd |
|
|
1m (Impact Resistance) |
|
|
|
IPX8, 2m (Waterproof AND Submersible) |
|
GEM10
|
FL1 STANDARD |
Turbo |
Ultralow |
 |
800 LUMENS |
1 LUMEN |
|
*1h |
500h |
 |
186m |
7m |
|
8650cd |
14cd |
 |
1m (Impact Resistance) |
|
 |
IPX8, 2m (Waterproof AND Submersible) |
|
NOTICE: The above data has been measured in accordance with the international flashlight testing standards ANSI/NEMA FL1 using 1×18650 Li-ion battery (3500mAh). The data may vary slightly during real-world use due to battery type, individual usage habits and environmental factors.
* The brightness levels from ultralow to turbo is infinitely variable, with corresponding runtime ranging from 1 hour to 500 hours. (The runtime for Turbo mode is the testing result before starting temperature regulation.)
GEM8UV
|
UV(Turbo) |
UV(Ultralow) |
|
|
Output |
3000mW |
5mW |
|
Runtime |
*4h15min |
500h |
|
Impact Resistance |
1m |
|
|
Waterproof |
IPX8, 2m submersible |
|
GEM10UV
|
UV(Turbo) |
UV(Ultralow) |
|
|
Output |
3000mW |
5mW |
|
Runtime |
*4h15min |
500h |
|
Impact Resistance |
1m |
|
|
Waterproof |
IPX8, 2m submersible |
|
NOTICE: The above data has been measured by using 1×18650 Li-ion battery (3500mAh). The data may vary slightly during real-world use due to battery type, individual usage habits and environmental factors.
* The brightness levels from ultralow to turbo is infinitely variable, with corresponding runtime ranging from 4 hours 15 minutes to 500 hours. (The runtime for Turbo mode is the testing result before starting temperature regulation.)
Operating Instructions
Battery Installation
Battery installation is the same for all models in the GEM series. Insert the battery from its tail as illustrated in the diagram. (The model shown in diagram is GEM8)
NOTE:
- Ensure the batteries are inserted correctly. The light will not operate if batteries are incorrectly inserted.
- Avoid direct eye exposure.
- When the flashlight is kept in a backpack or left unused for extended periods of time, please remove all batteries to prevent accidental activation and battery leakage.
On/Off
- To switch ON: Rotate the switch in clockwise direction as shown in the diagram until a “click” sound is heard.
- To switch OFF: Rotate the switch in counter-clockwise direction as shown in the diagram until a “click” sound is heard.
Adjusting brightness levels
GEM8/GEM10
The brightness levels from ultralow to turbo are infinitely variable.
When the light is on, rotate the switch in a clockwise direction as shown in the diagram, and the brightness level will increase from 1 lumen up to 500/800 lumens. Brightness is adjusted in reverse by rotating the switch in a counter-clockwise direction.
GEM8UV/GEM10UV
The brightness levels from UV(ultralow) to UV(Turbo) are infinitely variable.
When the light is on, rotate the switch in a clockwise direction as shown in the diagram, and the brightness level will be changed from 5mW to 3000mW. Brightness is adjusted in reverse by rotating the switch in a counter-clockwise direction.
ATR (Advanced Temperature Regulation)
With Advanced Temperature Regulation module, the lights regulate its output and adapt to the ambient environment, maintaining optimal performance.
Changing batteries
Batteries should be recharged or replaced if any of the followings occurs: output appears to be dim or the flashlight becomes unresponsive.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant.
Warranty Service
All NITECORE® products are warranted for quality. DOA/defective products can be exchanged for replacement through a local distributor/dealer within the 15 days of purchase. After 15 days, all defective/malfunctioningNITECORE® products will be repaired free of charge for a period of 60 months from the date of purchase. After 60 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts.
The warranty is nullified if
- The product(s) is/are broken down, reconstructed and/or modified by unauthorized parties.
- The product(s) is/are damaged through improper use. (i.e. reverse polarity installation)
- The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to service@nitecore.com.
- All images, text and statements specified herein this user manual are for reference purpose only. Should any discrepancy occurs between this manual and information specified on www.nitecore.com, information on our official website shall prevail. SYSMAX Innovations Co., Ltd. reserves the rights to interpret and amend the content of this document at any time without prior notice.
SYSMAX Innovations Co., Ltd.
- TEL: +86-20-83862000
- FAX: +86-20-83882723
- E-mail: info@nitecore.com
- Web: www.nitecore.com
- Address： Rm 2601-06, Central Tower, No.5 Xiancun Road, Tianhe District, Guangzhou,510623, Guangdong, China
Thanks for purchasing NITECORE!
Please find us on facebook: NITECORE Flashlight
Documents / Resources
 |
LumiMe RGB Multi-Color LED Strip [pdf] User Manual LumiMe, Aurora, LED Strip |
