Lucky Miner LV06 Bros Bitcoin Miner Instruction Manual

SOLO: Mine cryptocurrency alone, earning full
rewards upon discovering new blocks.
PPLNS: Payment model calculating rewards based
on last N submitted valid shares.

P2P: Direct mining within blockchain network
by connecting to other nodes.
PPS: Payment model where miners receive
rewards based on valid shares submitted.

Which projects can be mined using LV06?

The LV06 can mine various projects including BTC, BCH, BSV, DGB,
XEC, RBL, BTCP, BIT, AUR, WCN, PPC, RVB, ACG, LCC, GLT, X1C.

“`

View Fullscreen

LV06 Product Manual
Mar. 2024 Ver 1.0

1. Specification
Product Glance
Model Version Crypto algorithm/coins Typical hashrate,GH/s(1-1) Poweron wall @25(1-2), Watt(1-1)
Detailed Characteristics
Power supply
Power supply AC inputvoltage range,V(2-1) Power supply AC inputfrequencyrange, Hz Power supply AC inputcurrent,A(2-2) Adapted AC outputpower requirement,W(2-3)
-1-

LV06Product Manual
Value
LV06 V2.1.0 SHA2 5 6 500±10% 15±10%
Value
100~240V AC 50/60 0.6 60

Hardware configuration
Networking connectionmode Serversize (Length*Width*Height,w/opackage),mm Serversize (Length*Width*Height,with package),mm Net weight, g Gross weight, g Noise,dBA @25 (2-4)
Environment requirements
Operation temperature, Storage temperature,
Operation humidity, RH Operationaltitude,m (2-5)

LV06Product Manual
WiFi 2.4G/Hotspot 105*60*33 206*163*60 136 500 38
0~30 -20~70 10%~90% 2000

-2-

LV06Product Manual
2. Conditions for using “Luckyminer LV06”
2.1 Power Requirements:
Ensure the device is connected to a stable power source and meets the corresponding voltage and power requirements.
2.2 Environmental Conditions:
It is recommended to use the device in a dry, well-ventilated environment to avoid overheating or moisture.
2.2.1 Good ventilate 2.2.2 It is prohibited to stack multiple devices or place them close together; 2.2.3 Do not place the device in a confined space.
2.3 Temperature Range:
Operate within 30 to ensure device stability and performance.
2.4 Equipment heat dissipation:
2.4.1 Ensure smooth ventilation at the air inlet and outlet of the device. 2.4.2 Blocking the air inlet and outlet of the device is strictly prohibited.
2.5 Network Connection:
Ensure the device is properly connected to the network and compatible with the selected mining pool protocol.
2.6 Maintenance:
-3-

LV06Product Manual Regularly clean the device and pay attention to maintaining the cooling system to ensure proper operation.
2.7 Usage Restrictions:
2.7.1 Avoid using the device in excessively harsh environmental conditions and adhere to manufacturer’s recommendations and warnings to maintain long-term stability.
2.7.2 It is prohibited to upgrade to unofficial firmware. No after-sales service will be provided when upgrading firmware under unofficial guidance.

3. Recommended parameters

3.1 Frequency: 575MHz, when the power consumption is >17W, please gradually reduce the frequency 3.2 Core voltage: 1300mV, when the power consumption is >17W, please gradually reduce the voltage.

4. Mining Mode

—

Mining mode

Mechanism description

SOLO

SOLO mining means mining cryptocurrency alone, earning full rewards upon discovering new blocks.

PPLNS

PPLNS mining refers to a payment model where miners’ rewards are calculated based on their last N submitted valid shares.

P2P

P2P mining refers to mining directly within the blockchain network by connecting to other nodes, rather than using centralized mining pools.

PPS

PPS mining refers to a payment model where miners receive rewards based on the number of valid shares they submit.

-4-

LV06Product Manual

5. Mineable projects

Item
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Project
Name
BTC BCH BSV DGB XEC RBL BTCP BIT AUR WCN PPC RVB ACG LCC GLT X1C

Reference mining pools

Pool 1
pool.vkbit.com:3333 p2p-spb.xyz:9338 bsv.gorillapool.io:3333 pool4ever.com:5109 hashpool.live:10043 mining4people.com:4181 na.mining4people.com:3452 38.242.200.177:4611 p2p-spb.xyz:12349 pool4ever.com:5112 pool4ever.com:5010 connect.reversedbitcoin.org:11300 pool4ever.com:5140

Pool 2
public-pool.io:21496 Solo-bch.2miners.com:9090 europe.mining-dutch.nl:4014 pool.dgb256.online:8080 xec.luckymonster.pro:9113 afinepool.xyz:4931 82.137.50.129:3420 103.230.158.177:50114 pool4ever.com:5115 na.mining4people.com:3334 solo.1pool.org:4004 zeusminingpool.com:5110 mining-pool.zapto.org:3450

sha256.na.mine.zergpool.com:3333

us-stratum.coinminerz.com:3310

au.merged.stratum.cminors-pool.com:58900

pool.cryptopowered.club:1064

Mining4people:3355

poolkh.com:4468

Pool 3
www.viabtc.com www.viabtc.com
p2p-spb.xyz:5027 mining.viabtc.io:3014 pool4ever.com:5014 btcp.mr-miner.org:5448 54.39.49.96:3442 valhala.is:3730 103.249.70.25:4369 kriptokyng.com:3312
na.mining4people.com:3415
p2p-spb.xyz:5555

Notes:

LV06 is applicable to all SHA256 algorithm projects;

For more mining pools, please refer to https://miningpoolstats.stream/bitcoin;

Due to regional and mining pool access difficulties, LV06 cannot access all mining pools.

-5-

6.Operating instructions

LV06Product Manual

6.1 Product list

6.1.1 LV06 miner * 1 6.1.2 Adapter(5V/6A,100-240V Input) *1 6.1.3 AC line *1
6.2 Power on

6.2.1 Connect the AC cable to the adapter Input;
6.2.2 Connect adapter output to miner DC port; 6.2.3 After power on, the adapter indicator light is green, the miner fan is running, and the miner screen displays “connect to ssid: Lucky_ ****”.
6.3 Connect to network

6.3.1 Search for the miner hotspot “Lucky_ ****” through WiFi on your phone or computer;
6.3.2 Select the “Lucky_ ****” hotspot (mobile or computer);
6.3.3 Wait for 5-10 seconds, automatically redirect to the mining configuration interface;

6.4 Mining configuration

6.4.1 We can enter the settings interface in 6.3.3 or by entering the IP in the browser;
6.4.2 Explanation of Setting Interface;
-6-

No. Setting items

Explanation

LV06Product Manual

WiFi SSID

WiFi name (special characters are strictly prohibited)

WiFi Password

WiFi password (special characters are strictly prohibited)

Stratum URL

Mining pool address or IP address

Stratum Port

Mining pool port number (multiple ports in the same mining pool correspond to different difficulties)

Stratum User

Registered username or main network wallet address for the mining pool

Frequency

ASIC IC operating Frequency(500-575MHz)

Core Voltage

ASIC IC core voltage(1200-1300mV)

6.4.3 Settings completed, click the “Save” button; 6.4.4 After saving the settings, click the “Restart” button.

6.5 View running status
6.5.1 Restart completed, wait for 30-60 seconds, the Home page will display the real-time running status of the miner.Contains information such as “Overview”, “Power”, “Pool information”, “Results”, etc…
6.5.2 The miner screen will synchronously scroll to display the above information.

6.6 View the status of pool
6.6.1 Log in to the mining pool website or app used by Miner; 6.6.2 Check online device status through username or wallet address.
-7-

LV06Product Manual

6. FAQ for Luckyminer LV06

No. Fault Descripption
Miner is powered on but can 1
not connect to WiFi
Miner is powered on, the 2
screen and fan do not work. Miner is powered on, the 3 screen does not light up and the fan works. The adapter light does not 4 light up or keeps flashing.

Fault pictures

Possible causes

Solution

Solving diagram

Using non 2.4G WiFi

Check WiFi type, must use 2.4G WiFi (Router/Hotspot)

WiFi name and password must be in WiFi name or password has
English/numbers, or a combination of special characters
English and numbers.

The control IC is notWhen powered on, press the reset button to

started

reset the main control chip (1-3 times).

Power adapter output Measure whether the adapter output voltage is

does not match.

5V±10%. If it is not 5V±10%, replace the adapter.

The control IC is notWhen powered on, press the reset button

started

to reset the main control chip (1-3 times).

The adapter does not output Replace adapter.
or the output is unstable.

-8-

WiFi, Power consumption is 5
normal, hash value is 0.

LV06Product Manual
Check the mining pool address carefully Mining pool address and query mining pool related information https://miningpoolstats.stream/bitcoin
thttps://miningpoolstats.stream/bitcoin

There may be multiple port numbers in the same

Port number

mining pool. Generally, different port numbers correspond to the difficulty of access. Please choose the

appropriate port number.

All mining pools have a minimum access difficulty.

Please ensure that the device computing power is

Mining pool difficulty below the mining pool access difficulty. Experience value: 500G can access a mining pool with

difficulty <1000 (port number)

You must use the mainnet wallet address of the

Wallet address currency being mined. For example: the BTC

mainnet address generally starts with 1/3/bc1.

Some mining pools require a registered account to use.

Username

For this kind of mining pool, you need to fill in the

miner name of the mining pool during configuration.

-9-

Miner runs with low power 6
consumption, <5W
Successfully connected to WiFi, 7
miner restarted repeatedly.
Miner keeps restarting and 8
the Hashrate is unstable.

LV06Product Manual

The control IC is notWhen powered on, press the reset button

started

to reset the main control chip (1-3 times).

Mining pool resolution Change mining pool.
failed

WiFi congestion and instability.

Change to a stable WiFi or hotspot.

Change to a locally allowed mining pool Mining pools are regulated.
or a well-known mining pool.

High power consumption,The environment temperature is <30,

high temperature, highand the equipment should be placed in a

temperature protection. well-ventilated place.

– 10 –

FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Documents / Resources

Lucky Miner LV06 Bros Bitcoin Miner [pdf] Instruction Manual
LV06, LV06 Bros Bitcoin Miner, Bros Bitcoin Miner, Bitcoin Miner

References

User Manual

Lucky Miner LV06 Bros Bitcoin Miner Instruction Manual

LV06 Bros Bitcoin Miner

Specifications

Detailed Characteristics

Power supply

Hardware configuration

Environment requirements

Product Usage Instructions

Conditions for using Luckyminer LV06

2.1 Power Requirements:

2.2 Environmental Conditions:

2.3 Temperature Range:

2.4 Equipment Heat Dissipation:

2.5 Network Connection:

2.6 Maintenance:

2.7 Usage Restrictions:

Recommended Parameters

FAQ

What are the different mining modes available on LV06?

Which projects can be mined using LV06?

Documents / Resources

References

Leave a comment

Cancel reply