LTECH EDA1 Dali Touch Panel Instruction Manual
Product features
- Latest DALI standard protocol IEC62386
- Support switch and dimming function.
- DALI bus supply power.
- The DIP switch can set address.
- Support scene, group, unicast, broadcast mode.
Technical specs
DALI touch panel
- Power supply: DALI power
- Output signal: DALI
- Dimming key:
EDA1: 1CH control
EDA2: 2CH control
EDA3: 3CH control
EDA4: 4CH control - Static current: 6mA@16V
- Standby current: 4mA@16V
- Working temperature: -30℃~55℃
- Dimensions: L86×W86×H37(mm)
- Package size: L113×W112×H50(mm)
- Weight(G.W.): 200g
Installation Instruction
Typical base as follow:
- European
- 86 style
Product size
Touch panel
Short press: switch; long press: dimming (suitable for unicast, broadcast and group mode).
Terminals
DALI address setting Wiring diagram
- X= (0-6): unicast mode;
- X= 7: group mode;
- X= 8: scene mode;
- X= 9: broadcast mode.
Via spin switch, you can set 64 unicast address (0-63), 16 group address (0-15) 16 scene addresses(0-15) and broadcast address.
- Unicast mode address:( 0-63)
X choose 0-6
First address value = X*10+Y
(value beyond 63 will be considered as 63)
- Group mode address:( 0-15)
X choose 7
First address value = Y
- Scene mode address:( 0-15)
X choose 8
First address value = Y
- Broadcast mode
X choose 9
- E.g.: Set initial address to 40 in unicast mode.
First address value = X 10+Y = 4* *10+0 = 40
- E.g.: Set initial address to 5 in group mode.
- E.g.: Set initial address to 14 in scene mode.
Wiring diagram
Documents / Resources
 |
LTECH EDA1 Dali Touch Panel [pdf] Instruction Manual EDA1, EDA2, EDA4, EDA3, EDA1 Dali Touch Panel, EDA1, Dali Touch Panel |
