LG LCW-005 Wi-Fi Modem
Specifications:
- Model Type: Wi-Fi Modem (WLAN Dongle)
- USB Extension Cable Model: PWYREW000
Product Usage Instructions
Before Use or Installation
Safety Precautions:
The safety precautions provided are crucial to prevent any hazards or damage while using the product. Please follow these safety guidelines:
- WARNING: Failure to observe these instructions could result in death or serious injury.
- CAUTION: Failure to observe these instructions could result in personal injury or property damage.
- Be cautious of potential electric shock or part damage.
Precautions for Wi-Fi Modem Installation
Note:
- Ensure your smartphone meets the system requirements for optimal functionality.
- Recommended environment: Android 4.1.2, iOS 9.1.1, or later versions.
- The application’s usability/design may change for enhancements.
- The application may not be compatible with tablets.
Wi-Fi Modem Installation
Components:
- Wi-Fi Modem
- USB Cable (60cm)
- Extension Cable (50cm)
- Manual
- Double-sided Tape (2 units)
Installation Steps:
- Ensure the indoor unit is off and the outdoor unit’s power is also off.
- Open the control box of the indoor unit.
- Connect the USB cable to the indoor unit PCB (CN_WF).
- Connect the Wi-Fi modem to the USB cable.
Application Installation
LG SmartThinQ Application Installation:
Note:
- Follow the checklist before reporting any failures related to the application or device connectivity.
FAQ:
Checklist Before Reporting Failure
| Symptoms | Checklist Actions |
|---|---|
| The air conditioner is not connected on the LG SmartThinQ application. | The device is not registered on the air conditioner. |
FCC Certification:
This device complies with part 15 of the FCC Rules. Users must follow specific operating instructions for satisfying RF exposure compliance.
Be sure to read the “Safety Precautions” before using the product.
Keep this manual in a place where anyone who uses the product can see it.
Please be careful when using this product and check it has not been altered in any way beyond its default state to prevent the occurance of accidents
Model Type: Wi-Fi Modem (WLAN Dongle)
BEFORE USE OR INSTALLATION
Safety Precautions
The following safety precautions are intended to prevent unforeseen hazards or damage in advance by using the product safely and correctly.
WARNING
Failure to observe these instructions could result in death or serious injury.
CAUTION
Failure to observe these instructions could result in personal injury or property damage.
WARNING
When installing
- Please contact a service center or installation shop to install the product.
- It may cause fire, electric shock, explosion or injury.
- Please contact a service centre or industry professional to install this product
- It may cause fire, electric shock, explosion or injury.
- Do not disassemble, repair or modify the product.
- It may cause fire or electric shock.
When using
- Do not place a heating device near the product.
- It may cause fire.
- Do not spill water inside the product.
- It may cause electric shock or failure.
- Do not direct an electrical short circuit to this product
- Giving a shock to the product may cause malfunction.
- Do not damage the product with a sharp and pointy object, etc.
- It may damage the parts and cause failure.
CAUTION
When using
- Do not clean with strong solvent-based detergent. Use a soft cloth.
- It may cause fire or product deformation.
- Do not touch with wet hands or pull the connecting cable.
- It may cause electric shock or failure.
Precautions for Wi-Fi Modem Installation
- It must be installed by a professional installer.
- The wireless router should be installed within 10 meters.
It is recommended to be installed near the product. - Install in a place free from electromagnetic interference.
It may cause malfunction of the product. - If there is a wall or obstacle between the Wi-Fi modem and the wireless router, communication issues may occur
- If it is attached to steel structures such as H beams, steel plates, indoor cabinets, etc., communication issues may occur
- Depending on the installation situation, use a 10m extension cable (sold separately), but do not connect more than 10m.
- Do not install the product in a place with high temperature or humidity such as a kitchen or bathroom.
- Install at least 1cm away from the metal panel.
NOTE
- Depending on your smartphone, some functions may not work.
- An environment of Android 4.1.2, iOS 9.1.1 or a later version is recommended for the use of the application.
- The environment for the use of the application is subject to change for usability/design improvement and content enhancement.
- It may not work on a tablet.
WI-FI MODEM INSTALLATION
Components
Installation Parts
Installation Equipment
USB Extension Cable (Sold Separately) Model: PWYREW000
Use a USB extension cable depending on the installation environment. USB extension cable includes ferrite core.
Installation
- Check if the indoor unit is turned off and the power of the outdoor unit is turned off.
- Open the control box of the indoor unit.
- Connect the USB cable to the indoor unit PCB (CN_WF).
- Connect the Wi-Fi modem to the USB cable.
APPLICATION INSTALLATION
LG SmartThinQ Application Installation
- Search and install “LG SmartThinQ” from the Google Play Store or iOS App Store on your smartphone.
- Refer to the help in the application for how to use “LG SmartThinQ” in detail.
NOTE
- The Wi-Fi only supports 2.4 GHz radio frequency.
- If the router’s security method is WEP, product registration may not be possible. Change the security method of the router (WPA2 recommended) and register the product.
- When registering the product, be sure that the Wi-Fi function of your smartphone is turned on.
- The wireless router and Internet connection line are separate items required for the use of the applica-tion and must be installed separately.
- You may contact your Internet service provider or install the wireless router yourself to use the wireless network. When you install the wireless router yourself, be sure to refer to the manual that comes with the router.
- Install the wireless router close to the product. Depending on the installation location or distance between the product and the wireless router, a difference in the signal strength of the wireless network may occur, and the time taken to transmit and receive data may differ.
- It may not be connected depending on the network environment. If you cannot connect it or have trou-ble setting up the network, please contact your network administrator or Internet service provider.
- The wireless router’s SSID (the name of the wireless router that appears when searching for Wi-Fi) must be set to an English, numeric or alphanumeric combination. We do not recommend using Korean letters (Hangeul) or special characters because the information is not sent to the product modem properly and connection may not be established smoothly.
- When connecting to the wireless network, not only the wireless router that you use but also other users’ wireless routers used nearby may be searched. Using other users’ wireless routers is illegal and may result in legal penalties when caught. Be sure to connect to a wireless router that you are permitted to use to use the network.
- The contents of this manual may differ depending on the version of “LG SmartThinQ” application, and some changes may be made without notice to the user.
- Features provided may vary by model.
- The accumulated power before Wi-Fi installation is not displayed.
CHECKLIST BEFORE REPORTING FAILURE
Checklist Before Reporting Failure
| Symptoms | Checklist | Actions |
|
The air conditioner is not connected on the LG SmartThinQ application. |
• Is the power of the air conditioner disconnected? • Is the wireless router connected to the air conditioner turned off? |
• Connect the power of the air conditioner. • Turn on the router. |
|
The device is not regis- tered on the air conditioner. |
• Is the distance between the air conditioner and the wireless router too far? • Is the wireless router normal? |
• Move the wireless router closer to the air conditioner.
• There are routers that only service the subscribers for each telecommunications- tions carrier. If it is an old router, contact your service provider and replace it with a new one. |
Open source software notice information
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com.
This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.
FCC Certification
FCC Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference and
- This device must accept any interference received, including interference that may cause undesired operation of the device.
Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the antenna and your body. Users must follow the specific operating instructions for satisfying RF exposure compliance.
| Wireless LAN module specifications | |
| Model | LCW-005 |
| Frequency Range | 2412~2462 MHz |
|
Output Power (Max) |
IEEE 802.11b : 19.29 dBm IEEE 802.11g : 25.43 dBm IEEE 802.11n : 25.30 dBm |
IC Certification
Industry Canada Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
IC Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm (7.8 inches) between the antenna and your body.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
| Wireless LAN module specifications | |
| Model | LCW-005 |
| Frequency Range | 2412~2462 MHz |
| Output Power (Max) | IEEE 802.11b : 19.29 dBm IEEE 802.11g : 25.43 dBm IEEE 802.11n : 25.30 dBm |
Connection and use of this communications equipment is permitted by the Nigerian Communications Commission
RF Radiation Exposure Statement
This equipment shall be installed and used at a minimum distance of 20 cm from the human body.
Declaration of Conformity
Hereby, LG Electronics declares that the radio equipment type Wi-Fi Modem(WLAN Dongle) is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.lg.com/global/support/cedoc/cedoc#
LG Electronics European Shared Service Center B.V.
Krijgsman 1
1186 DM Amstelveen
The Netherlands
www.lg.com
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
Documents / Resources
 |
LG LCW-005 Wi-Fi Modem [pdf] Installation Guide 81001207, LCW-005 Wi-Fi Modem, LCW-005, Wi-Fi Modem, Modem |