15STA Portable Fog Machine
“
Specifications
- Model: 15STA
- Accessories:
- 2 Reflector
- 3 Silicone Diffusion Dome
- 1 Handheld light
- 4 Mobile phone clip (horizontal / vertical)
- 5 Type-C charging cable
- 6 Camera bracket + Hand screw X 2 + Cold shoe mount
- Charging Voltage: 5V2A
- Brightness: 10-100% adjustable
- Lighting Effects: 28 types
Product Usage Instructions
Operating Instructions
- Turn on/off: Press the power button to turn
on. The indicator lights will show battery level. Charge if
needed. - Brightness Adjustment: Rotate the knob
clockwise to increase brightness and counterclockwise to decrease.
Indicator lights show the brightness level. - Special Effects: Double click button for
special effects mode. Click button to switch between cold/warm
lighting.
FX Mode Usage
There are 8 different effects available. Press the button to
switch between effects. Double click to exit after setting up.
Bracket Description
- Bracket Setup: Use the 1/4 screw hole to
attach the bracket to the light securely. - Camera Mounting: The bracket can be bent and
used with the cold shoe holder to mount the light on top of the
camera. Use the hand screws for a secure fit.
Camera Usage
- Installation: Align the bracket to the bottom
of the light and tighten the screw by hand. Mount the camera on the
bracket and secure with hand screws. - Stability Check: Before each use, ensure
stable installation to prevent accidents.
Mobile Phone Usage
The mobile phone clip allows for horizontal or vertical
placement. Follow similar steps as in camera usage for installation
and stability checks.
Frequently Asked Questions (FAQ)
Q: How do I know when the device is fully charged?
A: When charging, the lights will turn on in percentage order,
and the blue light will remain on when fully charged.
Q: How can I switch between different lighting effects?
A: Press the button to switch between different lighting
effects. Double click to exit after setting up.
Q: What should I do if the indicator light flashes red?
A: If the red light flashes, please charge the device to ensure
proper functionality.
“`
INSTRUCTION
MANUAL
MODEL: 15STA
LIST OF ACCESSORIES
You will receive the following accessories (subject to the options available at the time of your order)
2 Reflector
3 Silicone Diffusion Dome
1 Handheld light
4 Mobile phone clip (horizontal / vertical )
5 Type-C charging cable
6 Camera bracket + Hand screw X 2 + Cold shoe mount
OPERATING INSTRUCTIONS
Product structure diagram.
2
1
3
4
5
1 Turn on/off
Drive on/off
2 Button
Double click to enter special effects mode Click to switch between cold/warm lighting
3 knob
Turn the knob clockwise to adjust the brightness of the light, and the indicator light will light up according to the% ratio. When turned counterclockwise, the brightness will be dimmed, and the indicator light will display according to the% brightness ratio
4 Indicator light
Turn on the blue light and flash the low battery red light
5 Type-C charging port
Charging voltage 5V2A
2 1
3
10-100% adjustable brightness
Rotate clockwise by 3 to adjust the brightness of the light, and the indicator light will light up according to the percentage. Rotate counterclockwise to dim the brightness, and 4 the indicator light will display according to the brightness%
28 types of lighting effects
Double click 2 to enter special effects mode
3Click to switch between cold/warm lighting Click 2 to switch instantly
5Turn on/off
Push 1 to power on, automatically detect the battery level upon startup, display the current battery level in% position. If none of the lights are on, please charge
After turning on, the 4 indicator lights turn blue. If the red light flashes, please charge the device When charging, the lights will turn on in percentage order, and the blue light will remain on when fully charged
Power on Please recharge
Charging Fully charged
FX MODE
8 different effects, press to switch, double click to exit after setting up
LIGHTNING MODE
TV MODE
BAD BULB MODE
SOS
SOS MODE
BURST MODE
CANDLELIGHT MODE
PULSE FLASH MODE
HIGH AND LOW BEAM BULBS
BRACKET DESCRIPTION
1
2
3
5
6
1 1/4 screw hole, fits 5 , locks bracket to light.
2 The bracket can be bent and used in conjunction with the cold shoe holder to mount the light on top of the camera
3 With 6 hand screws, the camera can be mounted to the bracket with a locking mechanism.
! WARNING
Keep this product out of the reach of children in a safe place. Please use the original parts correctly. Before each use, please be sure to check whether the installation is stable, to prevent accidents during use. Store in a cool, dry place, prohibit exposure to the sun, waterproof
Camera Usage
! WARNING
1: Align the bracket to the bottom of the light first and tighten the screw by hand 2: The camera is set up on the bracket and screwed in by hand. 3: Can be expanded to install any equipment with 1/4 interface according to the use of demand
Before use, please carefully check whether the installation is stable or not.
Mobile phone usage
Adjustable horizontal/vertical racket
! WARNING
1: Align the bracket to the bottom of the light first and tighten the screw by hand 2: The camera is set up on the bracket and screwed in by hand. 3: Can be expanded to install any equipment with 1/4 interface according to the use of demand
Before use, please carefully check whether the installation is stable or not.
Camera Usage
15STA is a COB 15W, colour rendering index 96, burst flash, along the vintage flash styling of the constant light, mobile phone / camera can be used!
WITH SILICONE SOFTBOX
The soft light amplitude is suitable, the light is soft and not harsh
0%-100% BRIGHTNESS ADJUSTABLE
Turning the adjustment knob, the brightness change range is 0-100%.
SPECIFICATION
MODEL
15STA
TYPE
COB 15W
Colour temperature: /
Jadeite thumb ring 96
Batteries
2 x 18650 14.8V (2600mAh)
Charging Voltage Duration of use Adjustment range
12V 2A
Approx. 1 hour
(when used at maximum brightness)
Brightness adjustment 0%-100%
Number of beads Total 192 pcs
Bead Voltage
36 ~ 68V
Bead Current
1100mA
INSTRUCTIONS NOTES
This manual provides information on the proper use and storage of the product and accessories, and assists the user in dealing with questions about their use and in understanding the safety precautions to be taken.
PLEASE READ CAREFULLY
When handing the product over to another person, be sure to include this manual, heed all warnings and follow all instructions in the manual.
2 YEAR WARRANTY DESCRIPTION
The warranty, which applies to all purchasers from our authorised dealers, covers any defects caused by production, as well as failures in the course of normal use, excluding physical damage, natural disasters (fire, flood, earthquake lightning, etc.) and chemical corrosion, unauthorised repairs, replacement of components during handling, collisions at the site of the installation and other failures due to human or force majeure reasons. and damage, or the manual Any malfunction caused by acts expressly prohibited by the instruction manual
ACCESSORY DESCRIPTION
Mobile phone clip, camera frame, hand screws and other accessories are consumables (not in the 2-year warranty), after use, please confirm whether there is aging, damage and other conditions of this phenomenon is normal wear and tear, in order to use the convenience of please contact the dealer in time to buy new parts replacement!
MAINTENANCE METHODS
Please use a soft sponge, soft cloth, dry cloth to clean the product regularly, do not use bleach, wire ball wipe, wipe clean and keep the product dry.
For more information on LENSGO product features, Please visit W W W.lensgo.net
! WARNING
Do not touch the COB lamp beads with your hands to prevent burning hands
This product is a precision instrument, please avoid dropping it when using it.
Contact authorised service personnel when repairs are required
It is recommended to use the original LENSGO cables. Any damage to this product caused by the use of non-Longsong original accessories is not covered by our warranty. Any damage to this product is not covered by our warranty.
Please clean the product with a soft, dry cloth. This specification is based on our rigorous testing. Design and specifications are subject to change without notice
Please keep it in a safe place, read this instruction manual carefully, and observe all precautions
Before use, please check whether the installation is stable, to prevent accidents during use. Please switch off the product after charging, in order to protect the safety and life of the battery, try not to use it during charging. use the product during charging.
Do not cover the ventilation holes when using the silicone softbox.
CERTIFICATE OF CONFORMITY
PRODUCT NAME: MODEL INSPECTION DATE INSPECTOR:
QUALIFIED
Use your phone’s camera or browser to scan the QR code for product support and user guide.
OR PLEASE VISIThttps: // www.lensgo.net / and click on the ” User Guide ” menu.
JIAZHIYING PHOTOGRAPHY EQUIPMENT CO., LTD.
Address: Room 201, Building C, No. 8 Fengqi Road, Fucheng’ao Community, Pinghu Subdistrict, Longgang District, Shenzhen, China Webhttps://www.lensgo.net /
Documents / Resources
 |
LENSGO 15STA Portable Fog Machine [pdf] Instruction Manual 15STA, 15STA Portable Fog Machine, Portable Fog Machine, Fog Machine, Machine |