LeLightGo 10367 Balrog Book Nook
Product Specifications
- Product Name: Light Kit For The Lord of the Rings: Balrog Book Nook 10367
- Manufacturer: LeLightGo
- Email Support: support@LeLightGo.com
How to Insert and Unplug the Connector
The Symbols used In this Guide
When going through the following guide you will come across symbols and formats that will assist with the installation of your light kit. Take notice of them as each has a specific purpose
Connect
Used when you need to connect a LEGO piece or light component
Disconnect
Used when you need to remove a LEGO piece
Directional
Used to show where to route cables, place components, or move them
Bend/Pivot
Used when a component needs to be bent, or part folded or pivoted
Power On Test
Used when need to test the lights
Turn
used when the set needs to be rotated or flipped
Repeat Step
Repeat the previous step
Adhesive Tape
Tear off the adhesive tape and perform the pasting operation
Add Part
Add part
The Compatible Power Devices As Follows
Product Usage Instructions
NOTE
Before installation, please have a test of the light to make sure all can light up. If the lights do not work.please contact us. After finish testing, pls put all the components back to the bag.
Testing Lights Before Installation
Before beginning the installation process, it is recommended to test each light included in the kit. This ensures that all lights are functioning correctly before proceeding with the installation.
Installation Process
Follow these steps to install the light kit:
- Prepare the Lord of the Rings: Balrog Book Nook 10367 for installation by ensuring it is clean and free of any obstructions.
- Refer to the provided instruction manual for specific placement of lights within the book nook.
- Carefully attach each light according to the instructions provided, ensuring a secure connection.
- Once all lights are installed, test them again to confirm proper functionality.
Contacting Support
If you encounter any problems during the installation process or have questions about the product, please reach out to support@LeLightGo.com for assistance.
Frequently Asked Questions
Can additional lights be added to the kit?
The light kit is designed for use with The Lord of the Rings: Balrog Book Nook 10367 as specified. Adding additional lights may require modifications and could void any warranty provided with the kit.
Documents / Resources
 |
LeLightGo 10367 Balrog Book Nook [pdf] Installation Guide 10367, 10367-, 10367 Balrog Book Nook, 10367, Balrog Book Nook, Book Nook, Nook |