LEETEK NQTX NoQ Paging System
FUNCTION
Name Description
- NoQ Pager FND : Pager Number
- NoQ Transmitter Power : USB C Type (+5V, Only Power, No Data communication)
- NoQ Pager Charging Port 10 Slot : +5V
- NoQ Transmitter FND
- NoQ Transmitter Key Pad
Initial Display
Standby Display
※ The standby display on the FND blinks once per second.
Setup Menu
No. | SETUP MODE | SETUP PASSWORD | Remark | ||
2580 | 2386 | 9838 | |||
0 | V-XX | O | Version | ||
1 | Alt | O | Alert | ||
2 | oor | O | Out of Range | ||
3 | tESt | O | Range Test | ||
4 | Prog | O | Pager Individual ID Change | ||
5 | SLP | O | Sleep | ||
6 | oPt | O | Key Option | ||
7 | bASE | O | Base ID | ||
8 | bPS | O | Baud Rate | ||
9 | FrEq | O | Frequency | ||
10 | ALL | O | Pager All Change | ||
11 | rEAd | O | Pager All Read | ||
12 | PoW | O | RF Level | ||
13 | rFoF | O | RF TEST | ||
14 | d XX | O | Deviation |
Setup Mode
NO. | SETUP MODE | Function | Remark |
0 | V-XX | Version Display | |
1 | ALt | Pager Alert Type Setting | |
2 | oor | Out of Range (ON / OFF) | |
3 | tESt | Range Test Mode | |
4 | Prog | To Change The Pager Number | |
5 | SLP | Sleep Mode for Pagers | |
6 | oPt | Key Option For Numbers (ON: 10Key / OFF: Normal) * 10Key : Select from 10b(1-10) / 20b(11-20) / 30b(21-30) / 40b(31-40) / 50b(41-50) |
|
7 | bASE | Base ID (From 1 to 200) | |
8 | bPS | Baud Rate (500 / 1200) | |
9 | FrEq | Frequency (450.0250 / 457.5750 / 469.9750) | |
10 | ALL | To Change the Base ID / Baud Rate / Frequency of Pagers | |
11 | rEAd | To Read the Base ID / Baud Rate / Frequency / Version of Pagers | |
12 | PoW | RF Level (1 ~ 120) | |
13 | rFoF | rF-1 : Unmodulated / rF-2 : Modulation | |
14 | d XX | Deviation (EX : d 45 = 4.5K ) |
Setup Mode
How to enter SETUP mode:
NO. | Order | Details | Remark |
1 | ▲, ▼ Key together pressed for 3 seconds | ![]() |
|
2 | Password Input | ![]() |
Master PW: 2580 RF TEST PW: 2386 DV PW: 9838 |
3 | SEND Key Input | ![]() |
Setup Menu Details
Key Details – Menu Up: “▲” / Menu Down: “▼” / Select: “▲” / Enter: “SEND” / Cancel: “▼” (when pressed for 3 seconds) / Number: 0 ~ 9
NO. | Setup Menu | Details | Remark |
0 | ![]() |
|
|
1 | ![]() |
|
[ Options ] oF – OFF 01 – 8 secs 02 – 15 secs 03 – 30 secs 04 – 60 secs 05 – 120 secs on – Continuous |
2 | ![]() |
|
|
3 | ![]() |
|
|
4 | ![]() |
|
The setting value is displayed on the FND of the pager |
5 | ![]() |
|
|
6 | ![]() |
|
On : 10Key Off : Normal * 10Key 10b : 1-10 20b : 11-20 30b : 21-30 40b : 31-40 50b : 41-50 |
7 | ![]() |
|
|
8 | ![]() |
|
|
9 | ![]() |
|
|
10 | ![]() |
|
The setting value is displayed on the FND of the pager |
11 | ![]() |
|
The setting value is displayed on the FND of the pager |
12 | ![]() |
|
Maximum +20.0dBm |
13 | ![]() |
|
rFoF : RF Off rF-1 : Unmodulated rF-2 : Modulation |
14 | ![]() |
|
Others
Call
Normal Mode
- To call a pager, press the pager number: Pager numbers range from 001 to 999.
- Press SEND to call the pager.
* To Cancel the mode, press the ▼ button.
10Key Mode
- Use the number keys 1~10 to directly call pagers.
- The available range of numbers may vary based on the key options (refer to oPt on Page 6): 1-10, 11-20, 21-30, 31-40, 41-50.
- The available range of numbers may vary based on the key options (refer to oPt on Page 6): 1-10, 11-20, 21-30, 31-40, 41-50.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Labeling Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF EXPOSURE STATEMENT
Your Pager Transmitter contains a radio frequency transmitter. When the button is pushed the transmitter sends our RF signals.
CAUTION: To comply with FCC RF exposure compliance requirements, a separation distance of at least 8 inches (20 cm) must be maintained between the antenna of this transmitter and all persons, during normal operation. The antenna uesd for this transmitter must not be collocated or operating in conjunction with any other antenna of transmitter. Unauthorized antennas, modifications, of attachments could damage the transceiver and may violate FCC regulations.
FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Industry Canada Statement
This device complies with RSS-119 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Industry Canada Radiation Exposure Statement
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.
Documents / Resources
![]() |
LEETEK NQTX NoQ Paging System [pdf] User Manual 2BHHL-NQTX, 2BHHLNQTX, NQTX NoQ Paging System, NQTX, NoQ Paging System, Paging System, System |