LASER TREE R2 2W IR 1064nm Infrared Laser Module
Packing List
Parameters
- Product Name: Engraving Module
- Wavelength 1064nm1nm
- Optical Power 2W
- Input DC 24V 4A
- Input Port XHB2.54 5PIN
- Operation Mod: Pulsed Laser
- Focus Length 23mm
- Spot Size 0.03mm
- PWM Modulation 0-5, VO-5kHz
- Cooling Mode Air-cooling
- Operating Temperature 0-60°C
- Module Net Weight 448g
- Module Size 50*50.5*143.8mm
Outline Dimension (Unit: mm)
Sliding Plate
Multiple holes bring widespread installation compatibility.
Outline dimension (Unit: mm)
Accessories for the sliding plate
Driver Adapter
- Output A: 3-pin connector
- Output B:3-pinN connector
- Input A4-pinIN connector
- Input 4-pinPIN connector
- Input C: 3-pin connector
- Input D:2-pinN connector
- DC Input: 12V or 24V power adapter
- Power Switch:
- EXT→External power supply
- INT→Internal power supply
- Power indicator: It is red when the power cable is connected correctly.
- TTL/PWM indicator: It is green when the TTL/PWM cable is connected correctly.
PIDefinitionon
Connection
- Connect 5pin end of the input cable to the laser module and the other end of the input cable to the 3pin cable. Then connect the 3pin cable to the output port on the driver adapter.
- Connect the engraver output cable to the corresponding input port of the drive adapter.
- Connect the adapter to the DC input port of the drive adapter.
- Switch to Ext (external power) mode on the drive adapter and then start to use the laser module.
Connection diagram
Engraving Focus Description
The R2 engraving module has a focal length of 23mm and is equipped with a fixed focus lever and a red light positioning device so that the engraving position can be easily positioned.
Safe Use & Maintenance
- Laser can damage a person’s skiPleasease do not expose your skin directly to the laser.
- Children or teenagers are strictly prohibited from using the module alone.
- Please wear laser goggles to protect your eyes when you use this laser module.
- This module doesn’t support hot plug. Hot plug may cause damage to the module.
- When the laser module is not used for a long time, please ensure that the lens is not polluted by dust.
For more maintenance information, please contact us at lasertree@micost-optotech.com.
Documents / Resources
 |
LASER TREE R2 2W IR 1064nm Infrared Laser Module [pdf] User Manual R2, R2 2W IR 1064nm Infrared Laser Module, 2W IR 1064nm Infrared Laser Module, 1064nm Infrared Laser Module, Infrared Laser Module, Laser Module, Module |