KMART-LOGO

Kmart 43340811 2 Wire Drawer Unit

Kmart-43340811-2 -Wire-Drawer-Unit-FIG- (4)

Product Information

Specifications

  • Model Number: K: 43-340-811 | T: 68-727-291 2 WIRE DRAWER UNIT
  • Maximum Safe Loading Weight: 10kg for top panel, 5kg for each drawer
  • For Indoor Use Only

Product Usage Instructions

Assembly Instructions
To assemble the wire drawer unit, please follow the steps below:

Step 1
Place either cardboard or a blanket on the floor to protect both the floor and the drawer unit during assembly.

Step 2
Using a screwdriver (not provided), attach A screws (4PCS) to the designated holes on the unit.

Step 3
Attach B nuts (4PCS) to secure the screws in place.

Step 4
Attach C screws (4PCS) to the remaining holes on the unit.

Step 5
Place D washers (4PCS) on top of the C screws.

Step 6
Using the provided spanner (1PC), tighten the C screws until the unit is fully assembled. Do not over tighten.

Hardware List

  • A Screw (4PCS)
  • B Nut (4PCS)
  • C Screw (4PCS)
  • D Washers (4PCS)
  • E Spanner (1PC)

Required Tools

  • Screwdriver (Not Provided)
  • Mallet (Not Provided)

Important Notes

  • Do not tighten the screws until the product is fully assembled.
  • This product is for indoor use only.

FAQ

Q: What is the maximum weight limit for the top panel and each drawer?
A: The maximum safe loading weight is 10kg for the top panel and 5kg for each drawer.

Q: Are the required tools included with the product?
A: No, the screwdriver and mallet are not provided. You will need to have these tools available for assembly.

Q: Can I use this product outdoors?
A: No, this product is designed for indoor use only.

Assembly Instructions

K: 43-340-811 | T: 68-727-291 2 WIRE DRAWER UNIT

ATTENTION: While assembling sections D and E and using a mallet, plastic chips may be released, this is normal and should not be of concern. Place either cardboard or a blanket on the floor so that both the floor and the drawer unit will be protected during assembly. MAXIMUM SAFE I OADING WEICHT. 10KC FOP TOD DANEI EKE FOR FACH DRAWED

Hardware list

Kmart-43340811-2 -Wire-Drawer-Unit-FIG- (1)

PARTS

Kmart-43340811-2 -Wire-Drawer-Unit-FIG- (2)

INSTRUCTION

Kmart-43340811-2 -Wire-Drawer-Unit-FIG- (3)

 

DO NOT TIGHTEN THE SCREWS UNTIL THE PRODUCT IS FULLY ASSEMBLED. FOR INDOOR USE ONLY

INSTALLATION

Kmart-43340811-2 -Wire-Drawer-Unit-FIG- (4)

Documents / Resources

Kmart 43340811 2 Wire Drawer Unit [pdf] Instructions
43340811 2 Wire Drawer Unit, 43340811, 2 Wire Drawer Unit, Drawer Unit, Unit

References

Leave a comment

Your email address will not be published. Required fields are marked *