KP150-LIN Mechanical Keypad
“
Product Information
Specifications:
- Profile Indicator Color: Indicates active profile and wireless
pairing status - Num Lock Key: TAP to activate Num Lock on PC or Clear on Mac,
HOLD for special commands - Num Lock Indicator: White for Num Lock On, Off for Num Lock
Off - Palm Support: Provides a comfortable resting place for the
palm - USB C Port: For connecting to PC and optional backlighting
- Profile Switch: Controls device connection – Wired,
Wireless
Product Usage Instructions:
Profile Indicator:
The color and flash speed of the Profile Indicator provide
information on the active profile and wireless pairing status.
Num Lock Key:
TAP to activate Num Lock on PC or Clear on Mac. HOLD the key to
access special commands in the Aux layer.
Clear Bluetooth:
To re-pair the keypad with a Bluetooth device, slide the Profile
Switch to the desired Wireless position, then HOLD Num Lock and tap
0 to enter pairing mode.
Palm Support:
The palm support offers a comfortable place to rest your palm,
reducing harmful wrist extension during use.
USB C Port:
Connect the keypad to your PC using the included USB cable for
backlighting or to conserve battery power.
Profile Switch:
Use the Profile Switch to choose between Wired (Green), Wireless
(White), or Wireless (Blue) modes for sending keystrokes.
Adjust Backlight:
HOLD Num Lock and tap + to adjust backlight levels when
connected via USB.
Clique Unlock:
Customize each key using the Kinesis Clique Programming App.
Unlock the keypad by HOLDING Num Lock and tapping Enter when
prompted.
Battery Compartment:
Locate the battery compartment beneath the palm support for
battery replacement instructions.
FAQ
Q: How do I know if the keypad is in pairing mode?
A: The Profile LED will start flashing quickly when the keypad
is in pairing mode.
Q: Can I connect the keypad to multiple devices
simultaneously?
A: The keypad can be connected to multiple devices, but
keystrokes will only be sent to the device selected via the Profile
Switch.
“`
Profile Indicator Color indicates Active Profile and flash speed indicates the wireless pairing status. -Fast: Ready to Pair -Irregular: Remove Device -Slow: Searching -Solid/Off: Connected
Num Lock Key TAP to activate Num Lock on PC or Clear on Mac. HOLD the key to access the 3 special commands in the “Aux” layer.
Num Lock Indicator White: Num Lock On Off: Num Lock Off
Clear Bluetooth If you need to re-pair the keypad with a Bluetooth device, slide the Profile Switch to the desired Wireless position, then HOLD the Num Lock and tap 0. The Profile LED will start flashing quickly to indicate pairing mode is active.
Palm Support The palm support provides a comfortable place to rest your palm to reduce harmful wrist extension.
USB C Port If you need backlighting or simply prefer not to consumer battery power, simply use the the included USB cable to connect to your PC.
Profile Switch Use the 3 position Profile Switch to control which device the keypad sends keystrokes to. -Left: Wired (Green) -Middle: Wireless (White) -Right: Wireless (Blue)
Adjust Backlight HOLD Num Lock and tap + to cycle between backlight levels when connected via USB.
Clique Unlock Each key on the keypad can be customized using the Kinesis Clique Programming App (see Page 4). Visit Clique and unlock the keypad when prompted by HOLDING Num Lock and tapping Enter.
Battery Compartment Beneath the palm support is the battery compartment. See Page 4 for battery replacement instructions.
Documents / Resources
 |
KINESIS KP150-LIN Mechanical Keypad [pdf] User Guide KP150-LIN, KP150-LIN Mechanical Keypad, Mechanical Keypad, Keypad |