Keychron

Keychron Q0 Plus Customizable Keyboard

Keychron Q0 Plus Customizable Keyboard Product

Fully Assembled Version

Keychron Q0 Plus Customizable Keyboard (1)

Keyboard

  • 1x Fully Assembled Keyboard
    Including
  • 1x Aluminum Case
  • 1x PCB
  • 1x Steel Plate
  • 1x Sound Absorbing Foam
  • 3 Sets x Stabilizers
  • 1 Set x Keycaps (PBT Double-shot)
  • 1 Set x Switches
    CableKeychron Q0 Plus Customizable Keyboard (2)
  • 1x Type-C to Type-C Cable
  • 1x Type-A to Type-C Adapter
    Tools
  • 1x Switch Puller
  • 1x Keycap Puller
  • 1x Screwdriver
  • 1x Hex Key

Barebone Version

Keychron Q0 Plus Customizable Keyboard (3)

Keyboard Kit

  • 1x Keyboard Kit (Without Keycaps & Switches)
    Including
  • 1x Aluminum Case
  • 1x PCB
  • 1x Steel Plate
  • 1x Sound Absorbing Foam
  • 3 Sets x Stabilizers
    CableKeychron Q0 Plus Customizable Keyboard (2)
  • 1x Type-C to Type-C Cable
  • 1x Type-A to Type-C Adapter
    Tools
  • 1x Switch Puller
  • 1x Keycap Puller
  • 1x Screwdriver
  • 1x Hex Key

 

The VIA Key Remapping Software

Keychron Q0 Plus Customizable Keyboard (4)

Please visit caniusevia.com to download the latest VIA software to remap the keys. If the VIA software cannot recognize your keyboard, please reach out to our support to get the instruction.

Warranty The keyboard is highly customizable and easy to be rebuilt. If anything goes wrong with any of the keyboard components of keyboard during the warranty period, we will only replace the defective parts of the keyboard, not the whole keyboard.

Watch The Building Tutorial On Our Website

Keychron Q0 Plus Customizable Keyboard (5)

If you are building the keyboard for the first time, we highly recommend you watch the building tutorial video on our website first, then start building the keyboard yourself.

Factory Reset

Keychron Q0 Plus Customizable Keyboard (6)

Troubleshooting? Don’t know what’s going on with the keyboard?

  1. Try factory reset by pressing O+9 +1 (for 4 seconds)
  2. Download the right firmware for your keyboard from our website. Remove the power cable from the keyboard.
  3. Remove the “0” and “” keycap to find the reset button on the PCB.
  4. Hold the reset key while plugging in the power cable and then release the reset key. The keyboard now will enter DFU mode.
  5. Flash the firmware with the QMK Toolbox.
  6. Factory reset the keyboard again by pressing O +9 +1 (for 4 seconds)
    * Step by step guide can be found on our website

PLUS CUSTOMIZABLE KEYBOARD SPECIFICATIONS

Keychron Q0 Plus Customizable Keyboard (7)

Specifications
 

Layout

 

Numpad

 

Switch type

 

Mechanical

 

Width

 

137mm

 

Length

 

118.2 mm

 

 

Front height

20.1 mm (without keycaps)

 

30 mm (with keycaps installed)

 

 

Back height

32.6 mm (without keycaps)

 

41.5 mm (with keycaps installed)

Keyboard feet height  

1.9mm

 

Angle

 

5.26 degree

PLUS MECHANICAL KEYBOARD OVERVIEW

DEFAULT KEY LAYOUT

  • LAYER 0: This layer will be activated when your keyboard is connected.Keychron Q0 Plus Customizable Keyboard (8)
  • LAYER 1: This layer will be activated when you press the fn/MO(1) key.Keychron Q0 Plus Customizable Keyboard (9)

KEY DESCRIPTION

 

Key Description

Ser- Screen Brightness Decrease
Ser+ Screen Brightness Increase
 

Bright-

 

Backlight Decrease

 

Bright+

 

Backlight Increase

Prvs  

Previous

 

Play

 

Play/Pause

 

Next

 

Next

 

Mute

 

Mute

 

Vol-

Volume Decrease
 

Vol+

 

Volume Increase

 

RGBToggle

 

Turn Backlight on/off

 

Key Description

 

RGBMd+

 

RGB Mode Next

 

RGBMd-

 

RGB Mode Previous

 

Hue+

 

Hue Increase

 

Hue-

Hue Decrease
 

RGB SPI

 

RGB Speed Increase

 

RGB SPD

RGB Speed Decrease
 

MO(l)

Layer 1 will be activated when holding this key

Third-party input tools are not compatible with the keyboard. Due to compatibility, versions, brands and drivers of Windows/macos, functionalities of third-party input tools may be affected while using the keyboard. Please make sure your operating system and drivers are up to date.

Certain multimedia keys or function keys do not work. Functions of certain multimedia keys may be disabled due to compatibility, versions, brands, and drivers of devices.

Keychron Q0 Plus Customizable Keyboard (10)

  • *Multimedia keysKeychron Q0 Plus Customizable Keyboard (11)
  • Function keys

Safety Precaution

Keep the product, accessories and packaging parts out of the reach of children to prevent any accidents and choking hazards. Always keep the product dry to avoid corrosion. Do not expose the product to extreme temperatures below -10°C(5°F) or above 50°C(131°F) to preserve the lifesparn of the keyboard.

Keychron, Inc. Dover, DE 19901, United States Find us at: https://www.keychron.com Support@keychron.com

Documents / Resources

Keychron Q0 Plus Customizable Keyboard [pdf] User Manual
Q0 Plus Customizable Keyboard, Q0 Plus, Customizable Keyboard, Customizable Keyboard, Keyboard

References

Leave a comment

Your email address will not be published. Required fields are marked *