karlik logoASSEMBLY MANUAL IP44 SEALANT TO SWITCHES
OF DECO, ICON, MINI AND FLEXI SERIES

Characteristics of the sealant

The sealant (IP44) is intended for installation by the customer himself in switches of DECO, ICON, MINI and FLEXI series type:

Seria Symbol produktu
DECO DWP-1, DWP-2, DWP-3, DWP-3.1, DWP-4, DWP-4.1, DWP-5, DWP-6, DWP-6.1, DWP-8, DWP-8.1, DWP-9, DWP-10.1, DWP-10.11, DWP-10.2, DWP-10.21, DWP-33, DWP-33.1, DWP-44.1, DWP-44.2
ICON IWP-1, IWP-2, IWP-3, IWP-3.1, IWP-4, IWP-4.1, IWP-5, IWP-6, IWP-6.1, IWP-8, IWP8.1, IWP-9, IWP-10.1, IWP-10.11, IWP-10.2, IWP-10.21, IWP-33, IWP-33.1, IWP-44.1, IWP-44.2
MINI MWP-1, MWP-2, MWP-3, MWP-3.1, MWP-4, MWP-4.1, MWP-5, MWP-6, MWP-6.1, MWP-8, MWP-8.1, MWP-9, MWP-10.1, MW P-10.11, MWP-10.2, MWP-10.21, MWP33, MWP-33.1, MWP-44.1, MWP-44.2
FLEXI FWP-1, FWP-2, FWP-3, FWP-3.1, FWP-4, FWP-4.1, FWP-5, FWP-6, FWP-6.1, FWP-8, FWP-8.1, FWP-9, FWP-10.1, FWP-10.11, FWP-10.2, FWP-10.21, FWP-33, FWP-33.1, FWP-44.1, FWP-44.2

Way of connection
The sealer U-1 shall be set between the switch cube and the central sheet of the mechanism.
In the correct position there are two external buttons in the slots of the sealer. Next, prior to installation of button/buttons, the external frame shall be installed.

The way of setting is presented on the schema below

karlik DWP-1 Single-Pole Switch Mechanism

Accessories required for the sealant IP 44
Together with the sealer U-1 a DRPH (for DECO series), MKLH-1 / MKLH-2 (for MINI and ICON series) or FRH (for FLEXI series)a middle/external frame/press (for DECO/ICON/MINI/FLEXI series) shall be purchased for switch IP 44 available in different  colour variants (to be also used in multiframes).
Note!
Assembly shall be held by a suitably qualified person with deactivated voltage and shall meet the national safety standards.

Karlik Elektrotechnik Sp. z o. o.
ul. Wrzesihska 29 I 62-330 Nekla
tel. +48 61 437 34 00
e-mail: karlik@karlik.pl 
www.karlik.pl

Documents / Resources

karlik DWP-1 Single-Pole Switch Mechanism [pdf] Instructions
DWP-1 Single-Pole Switch Mechanism, DWP-1, Single-Pole Switch Mechanism, Switch Mechanism, Mechanism

References

Leave a comment

Your email address will not be published. Required fields are marked *