JXD-1M Series Modular Signal Lamp Instruction Manual

JXD-1M Series Modular Signal Lamp

Product Specifications

  • Rated Voltage: 230V AC
  • Rated Frequency: 50/60Hz
  • Color Options: Red/Green/Yellow (JXD-1M),
    Red/Green (JXD-2M), Red/Green/Yellow (JXD-3M)
  • Connection Terminal: Pillar terminal with
    clamp
  • Connection Capacity: Rigid conductor
    2.5mm2
  • Installation: On DIN rail 35mm
  • Max Power: 0.06W LED
  • Illumination: 30000 Hours

Product Usage Instructions

Installation

  1. Ensure the circuit power is switched off before
    installation.
  2. Mount the Modular Signal Lamp on a DIN rail with a width of
    35mm.
  3. Connect the rigid conductor with a capacity of 2.5mm2 to the
    pillar terminal using the clamp.

Usage

The Modular Signal Lamp is designed for visual indication and
signaling in circuits with a rated voltage of 230V and frequency of
50/60Hz. The lamp can display different colors based on the model
chosen: Red/Green/Yellow (JXD-1M), Red/Green (JXD-2M), or
Red/Green/Yellow (JXD-3M).

Maintenance

The LED lamp has a service duration of 30000 hours. Regularly
check for any signs of damage or malfunction and replace if
necessary to ensure proper functioning.

Circuit Diagram

(Insert Circuit Diagram Image here)

Frequently Asked Questions (FAQ)

Q: Can the Modular Signal Lamp be used outdoors?

A: The Modular Signal Lamp is designed for indoor use only and
should not be exposed to outdoor conditions.

Q: Is it possible to change the color of the lamp after
installation?

A: No, the color of the lamp is determined by the model chosen
during installation and cannot be changed without replacing the
entire unit.

“`

JXD Modular Signal Lamp The Modular signal Lamp is applicable to circuit with rated voltage 230Vand frequency 50/60Hz for visual indication and signaling.

Rated voltage Rated frequency
Colour
Connection terminal Connection capacity Installation Max power Illumination Service duration
Circuit Diagram

230V AC 50/60Hz JXD-1M Red/Green/Yellow JXD-2M Red/Green JXD-3M Red/Green/Yellow Pillar terminal with clamp Rigid conductor 2.5mm2 On din rail 35mm 0.06W LED 30000 HOURS

Overall and Installation Dimension

Documents / Resources

JXD JXD-1M Series Modular Signal Lamp [pdf] Instruction Manual
JXD-1M, JXD-2M, JXD-3M, JXD-1M Series Modular Signal Lamp, JXD-1M Series, Modular Signal Lamp, Signal Lamp, Lamp

References

Leave a comment

Your email address will not be published. Required fields are marked *