jiebolan A17 TWS5.4 Bluetooth Headset

Specifications

• Pairing mode: automatic pairing
• Boot prompt tone: power on
• Shutdown prompt sound: power off
• Group pair status prompt: Du
• Successful connection: connected
• Low power tip: tick tick
• Touch function:
• Power on: Long press the touch button for 3 seconds
• Shutdown: Long press the touch button for 5 seconds
• Pause / play: Click any of the button
• Answer / hang up the phone: Click any headset touch button
• Reject calls: long press any headset button 2S
• Volume Add: double-click the right headset touch button
• Volume reduction: double-click the left headset touch button
• Last song: three click the left headset touch button
• Next song: Click the right headset touch button
• Voice assistant Sl RI: Long press the left headset for 2 seconds
• Game mode: long press the right headset touch button for 2 seconds to relax
• No standby connection: 3 minutes automatic shutdown

Product parameter information

• Headset battery capacity: 40 mAh
• Listening time: 5 hours (full charge for single use)
• Call time: 4 hours (full charge use)
• Headphone charging time: -1.5 hours
• Battery capacity of the charging bin: 250 mAh
• Charging time of the charging bin: -1.5 hours
• Supporting protocol: A2DP / AVRC / HS / HFP
• Audio decode: AAC / SBC

packing list

• Bluetooth headset 2 PCS (left headset, right headset)
• charging storage box 1 PCS
• Charging line 1 PCS
• specification 1 PCS
• Small ear cap 2 PCS
• Big ear cap2 PCS

Middle ear cap2 PCS (on headphones) operation declaration: Special note: the first use of the headset needs to be used in the warehouse for 1 hour, You need to take out the headset and put it back in the charging compartment to wake up the headset, so as to realize the function of automatically starting the headset out of the warehouse. When the earphone leaves the factory, the left and right earphones have already been formed. If the left and right earphones cannot be formed, please operate as
follows:

Take out the charging box of the left earphone, and press the multi-function touch button of the left earphone for 5 times to restore the factory setting. The right headset is also operated. Then the left and right headphones are put back in the charging compartment again, and take out the headphones again for automatic team formation. Procedure: Two headphones (left / right headphones) press the touch button at the same time (or take two headphones from the charging compartment at the same time). The white and blue indicator light of the headset flashes alternately for about 10 seconds, and the left and right headphones will automatically team up. The white and blue indicator light of the main headset continues to flash alternately, the secondary headset indicator light is off, and the mobile phone Bluetooth search connection is opened. After the connection is successful, the indicator light of the two headphones goes off Headphone master-slave switch: the headset team successfully, after connecting the playback device, put the left headset in the charging compartment or long press the headset touch button to shut down. At this time, the right headset is the main headset. Put the right earphone into the charging compartment or long press the earphone touch button to turn off, then the left earphone is the main earphone

Two headphones can be automatically used alternately. matters need attention:

1. Do not fall, hit, scratch, twist, knock, crush, and put it into the water, etc.
2. When using headphones, move away from the magnet, WIFI, appliances, or speakers.
3. Try to avoid placing the Bluetooth headset in the extreme temperature (use the ambient working range-IOOC -55°C)
4. Avoid exposing the Bluetooth headset to wet conditions. Do not bring the Bluetooth headset close to the fire source.
5. Do not place the Bluetooth headset and the charging compartment next to the flammable and explosive items.
6. Using headphones for a long time will affect people’s hearing sense. Please adjust the volume to use the headphones appropriately.
7. in the process of using this product, it will affect the perception of external sound, please do not use this product in a harmful to human body environment.

serious warning:

1. When charging the product, please use a standard certified cha rger for charging.
2. To charge the charging compartment, a standard DC charger (DC 5V / 500 mA 2 A) must be used.
3. Do not remove the charging compartment and Bluetooth headset, or insert other items into the product to avoid damage or even damage to you.
4. Built-in lithium battery should not be disassembled and placed in the fire, do not let metal items contact or short circuit electrode, do not touch or squeeze the battery, avoid being placed in a wet corrosion or overheating environment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

FAQ:

• Q: Can the device be used in portable exposure conditions?
  A: Yes, the device has been evaluated for portable exposure conditions and can be used without restriction.

Documents / Resources

jiebolan A17 TWS5.4 Bluetooth Headset [pdf] Instruction Manual A17, A17 TWS5.4 Bluetooth Headset, TWS5.4 Bluetooth Headset, Bluetooth Headset, Headset

References

• User Manual