JETE S3 Wireless Speaker

IMPORTIR
PT. DORAN SUKSES INDONESIA Jl. Lebak Jaya 2 Tengah No. 2, Surabaya

CUSTOMER SERVICE
081217393609

IMKG.2151.10.2020
Please read the instructions carefully before using the product.

Product Introduction

Thank you for purchasing JETE products. It is expected to read the instructions carefully before using this product for optimal and safe performance.

Content Package

Description Structure Product

1. Power Button
2. Mode Button (М)
3. Vol-/Prev Button
4. Play/Pause Button
5. Vol+/Next Button
6. Voice Button
7. Charging Port Type-C
8. Memory Card Port
9. AUX Plug

How to Use :

How to Turn On and Turn Off the Speaker:

• Press and hold for 2 seconds on the power button to turn on the speaker, the LED indicator on the speaker will flash Blue
• Press and hold for 2 seconds on the power button to turn off the speaker.

How to Connect Devices with Bluetooth :

1. Turn on the speaker, the indicator light will flash blue indicating that bluetooth on the speaker is active and waiting to be paired with your device. when bluetooth is attached to the device there will be a sound indicating the device and Bluetooth are successfully attached.
2. Turn on bluetooth on the device and search “JETE-S3”, and than Click connect and the indicator will continue to light up, a sign of bluetooth successfully connected.
3. The speaker will automatically connect to thV previous device when powered on.

How to Answer an Incoming Call:
Press the play/pause button once to answer the call end the call

How to End a Call:
Press the play/pause button once to answer the call end the call

How to Reject a Call :
Press for 2 seconds the play/pause button to reject the call

How to Disconnect Bluetooth :
Double press on the M button to disconnect Bluetooth.

How to Change Mode:
Press 1x on the M button to change the mode (Bluetooth/memory card/AUX).

How to use a Micro SD card:
Insert the micro SD card and the speaker will automatically recognize and sound when the micro SD is inserted.

How to use AUX:
Connect the 3.5mm AUX to the device and speaker to play songs.

How to Activate the Voice Assistant Feature :
Long press on the play/pause button to activate the voice assistant.

How to Play Music:

1. Press once on the play/pause button to start/pause.
2. Press once on the “+” button to increase the volume
3. Press once on the “‘” button to decrease the volume.
4. Press a few seconds on the “+” button to play the next song (next)
5. Press a few seconds on the “-” button to play the previous song (prev)

How to Use 2 JETE-S3 Speakers Into One Pair (TWS)
You can connect 2 “JETE-S3” speakers into one pair to produce a strong stereo effect around you.

Follow these steps

• Make sure the bluetooth function on the speaker device is off.
• Turn on the 2 speakers simultaneously
• Press the power button twice on one of the speakers (which will be the main speaker), Both speakers will enter the TWS pairing state until the indicator light on the replacement speaker also flashes blue. TWS pairing is successful.
• Then activate bluetooth on your phone and search for “JETE-S3”. Click on Connect.

How to Charge :

• Use the Type-C cable to charge
• The charging voltage and flow is 5V/2A.
• Use the factory-supplied charger.
• Battery usage will decrease with use and as a result of repeated charging.
• The indicator light will be red, and the device will turn off when charging is complete.

How to Restore to Factory Settings
Press and Hold the M button for 6 seconds and release it, the speaker is successfully reset.

Specification

• Model: S2
• Bluetooth: V5.0
• Wireless Range: 18 m (Without Obstacles)
• Speaker:50 mm
• Output Power: 8Watt X 2
• Peak Power: 12watt x 2
• Speaker Frequency: 60Hz-20kHz
• Battery  : 3.7V /3600mAh
• Input Voltage: DC 5V/2.4A
• Playtime: 25 Hour
• Talktime: 25 Hour
• Charging Time: 4 Hour
• Material: ABS + Fabric
• Weight:490g
• Product Size : 145 x 68.5 x 54.5 mm
• Support: AUX, Bluetooth, Micro SD, TWS, Built-in Mic

Maintenance

Please read the following recommendations before using JETE

• Avoid exposing the device to water vapor or humid places. This can affect the internal circuit.
• Do not use cleaning solutions to clean the device.
• Do not expose the device to extreme heat or cold, as this can damage the device or change certain plastic parts.
• Avoid exposing the device to sharp objects, as this can cause scratches and damage.
• Do not disassemble or modify the device.
• Do not drop the device, as this can damage the circuitry.
• Always store the device at room temperature.

How to Warranty Claim JETE Product:

• All warranty claims can be made at the list of Authorized Outlets listed on the warranty card.
• Buyers can come to an authorized Outlet or contact Customer Service at +62812-1739-3609 if they want to exchange the product online.
• All expedition shipping costs/product postage are borne by the buyer.
• When claiming the warranty, the buyer is MANDATORY to show the completeness of the warranty:
  • A purchase receipt that clearly states the name of the outlet and the date of the transaction.
  • The product must still be within the specified warranty period.
  • Warranty card that has been filled out.
  • Box / Packing Product.
• Please inform the constraints/product damage that occurs to our staff.
• WARRANTY DOES NOT APPLY if USER DAMAGE is found, namely:
  • BROKEN, CRACKED, BURNED, DROPPED, MODIFIED BY YOURSELF, SUBMERGED IN WATER.
• If there are problems during warranty claims or other questions, please contact Customer Service at +62812-1739-3609

Terms and Conditions of Warranty :

1. This warranty is valid for 2 years for original JETE products.
2. This warranty is valid for the warranty period stated on the product packaging since the date of sale.
3. During the warranty period, the user is exempt from any replacement costs that may occur.
4. The user must show the warranty card and purchase receipt when applying for a warranty.
5. The warranty applies to functional damage:
   1. Disfunction.
   2. Audio not detected.
   3. Indicator off.
   4. Battery damage.
6. This warranty DOES NOT APPLY if:
   1. PRODUCT IS BROKEN, CRACKED, BURNED, FALLEN,
   2. MODIFIED YOURSELF, SOAKED IN WATER.
   3. Supporting accessories such as: cables, adapters, etc.
   4. Abnormal use, not stored properly, natural disasters, modified, or anything intentionally.
   5. The product has been repaired by a third party.
   6. The data is not filled in completely by the seller and buyer.
   7. Damage caused by user error.
   8. The product warranty period has expired.

2 YEARS WARRANTY NEW REPLACEMENT FOR ANY FAULTS *T&с

JETE WARRANTY POINTS

Documents / Resources

JETE S3 Wireless Speaker [pdf] User Manual S3 Wireless Speaker, S3, Wireless Speaker, Speaker

References

• User Manual