JBL Professional CSS-1S/T Compact Two-Way 100V/70V/8-Ohm Loudspeaker
Key Features
- 10 Watt Multi-Tap Transformer for 100V or 70V Distributed Speaker Lines
- 8 Ohm Direct Setting
- Included Wall-Mounting Bracket
- Professional Drivers and Network
Applications
CSS-1S/T is a versatile, compact two-way loudspeaker designed for use on 100V or 70V distributed speaker lines, or in 8 ohm direct mode. The 135 mm (5¼ inch) low frequency loudspeaker and 19 mm (¾ inch) polycarbonate dome tweeter reproduce full-range sound quality for foreground or background music and are voiced for maximum speech clarity and intelligibility.
The rugged enclosure is fitted with an included, easy-to-install ball-type wall-mount bracket that can pivot to aim the speaker in a variety of directions, or the speaker can be aimed straight out from the wall. The flat bottom surface of the cabinet allows the speaker to be set on a surface such as a shelf.
A multi-tap, multi-voltage transformer provides taps of 10 and 5 Watts when driven from a 100V distributed speaker line and 10, 5 and 2.5 Watts when driven from a 70V distributed speaker line. Tap selection is accomplished via a switch that is accessed from the back panel. The speaker has a power handling of 60 Watts continuous average pink noise (100 hrs continuously) when set in its 8 Ohm Direct setting.
Specifications
- IEC Standard, full bandwidth pink noise with 6 dB crest factor, 100 hr. duration.
- Average, 1 kHz to 10 kHz
- Calculated based on power handling and sensitivity, exclusive of power compression at high levels.
JBL continually engages in research related to product improvement. Some materials, production methods and design refinements are introduced into existing products without notice as a routine expression of that philosophy. For this reason, any current JBL product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise stated.
Frequency Response and Impedance
Beam width
Horizontal Off-Axis Frequency Response
Mounting Bracket
Safety Cable Not Included
Dimensions
Dimensions in mm (inches)
JBL Professional
8500 Balboa Boulevard, P.O. Box 2200 Northridge, California 91329 U.S.A. Copyright 2011 JBL Professional
FAQ’s
8 3/4 tall, 5 3/8 deep, and 6 1/8 wide.
THE PACKAGE CONTAINS TWO UNITS.
No, these speakers are made to work with a low voltage array system that uses 70 volts or 100 volts directly from an amp that is made to match that rating. If that’s what you want to use them for, I suggest Kicker’s indoor/outdoor speakers.
No, that speaker is inside. Regarding JBL controls, have a look. Depending on the model, they will specify if they are suitable for outdoor use.
At the speaker, there are many wattage settings that can be changed, but only use with specialty systems that are 70v or 100v.
A secure fit and IP68 protection. Exercise on land is effortless in any weather or situation thanks to the extreme IP68 water and dust resistance.
Generally speaking, you’ll want your speakers to be positioned on a firm surface that is between 24 and 48 inches high, looking squarely in your direction. Maintaining a few inches of space between the back of your speakers and a wall or other hard surface will also increase bass response.
Improve the audio quality of your HDTV by using JBL sound bars that give your home theatre a cinematic surround sound experience with the help of wireless subwoofers, Bluetooth soundbars, and soundbase. We have everything from bookshelf loudspeakers to floorstanding speakers with strong bass.
Long listening sessions are made possible by its battery life of almost 14 hours. When you wish to enhance your audio across a bigger space, you can connect it to additional JBL speakers that are PartyBoost compatible, such as the JBL Xtreme 3 and the JBL Pulse 4. It also has a PartyBoost button.
JBL speakers can be fixed, yes. To begin with, you should make sure your speaker is still covered by warranty. If so, you can submit a warranty request to JBL asking them to repair or replace your broken speaker.
You should only need to do this briefly with most Bluetooth speakers. The power and Bluetooth buttons must be pressed and held simultaneously in order for almost every Bluetooth speaker to be reset.
100 of our speakers can be paired together. With paired speakers, you may enjoy the best sound with all of your friends, whether you prefer stereo sound or more loudness!
The JBL need 3.5 hours to charge completely.
A red blinking LED shows that the battery needs to be recharged with the power adapter because it is very low. If the speaker shuts off when using the battery alone after fully charging the battery
The LED indicator on your JBL Go 2 will begin to blink red as soon as you attach it into a power source. When your speaker is fully charged and ready to use, it won’t switch off until then.
