Jasminer X44-Q Highly Efficient ASIC Miner

Specifications:

• Manufacturer: Jasmine
• Model: Jasminer X44-Q
• Mining Algorithm: Etchash (ETCHash)
• Maximum Hashrate: 7.8 Gh/s
• Energy Consumption: 780W (+/-10%)
• AC Input Voltage: 12V
• Interface: Ethernet
• Humidity Range: 5% – 95%
• Noise Level: 40 db
• Cryptocurrencies Mineable: Ethereum Classic (ETC), Musicoin (MUSIC), Ubiq (UBQ)

Product Usage Instructions

Maintenance:

To ensure the longevity and optimal performance of your Jasmine X44-Q, follow a regular maintenance schedule:

1. Regular Cleaning: Clean the device every 1-2 months using a soft cloth, brush, or compressed air.
2. Fan Inspection: Check the fans every 3-4 months for proper operation. Replace malfunctioning fans promptly.
3. Firmware Updates: Regularly check for firmware updates through the miner’s web interface.

Overclocking:

Overclocking involves increasing the hash rate by boosting the processing frequency. Follow these steps carefully:

1. Access the miner’s web interface using the IP address in your browser.
2. Increase the clock frequency gradually, monitoring temperature and power consumption.
3. Cooling and stability testing are essential precautions for overclocking.

FAQ

• Where can I purchase the Jasminer X44-Q (7.8 Gh/s)?
  • You can buy the Jasminer X44-Q from trusted online resellers like [minerasic.com] for warranty and support.
• How often should I clean my Jasminer X44-Q?
  • It is recommended to clean the device every 1-2 months, especially in dusty environments.

Complete Guide to the Jasminer X44-Q (7.8 Gh/s)

Introduction

The Jasminer X44-Q is a highly efficient ASIC miner designed for mining Ethereum Classic (ETC) and other coins that utilize the Etchash algorithm. With a maximum hashrate of 7.8 Gh/s and a power consumption of only 780W, this miner offers a powerful and energy-efficient solution for both professional and home miners.
Its exceptional performance-to-power ratio makes it an ideal choice for mining Ethereum Classic (ETC), Musicoin (MUSIC), Ubiq (UBQ), and other cryptocurrencies that rely on the Etchash algorithm. This guide covers the miner’s technical specifications, maintenance, overclocking, and tips to help you get the most out of your investment.

Technical Specifications of the Jasminer X44-Q (7.8 Gh/s)

Main Features

Feature / Details

• Manufacturer Jasminer
• Model Jasminer X44-Q
• Mining Algorithm Etchash (ETCHash)
• Maximum Hashrate 7.8 Gh/s
• Energy Consumption 780W (+/-10%)
• AC Input Voltage 12V
• Interface Ethernet
• Temperature Range 0°C – 40°C
• Humidity Range 5% – 95%
• Noise Level 40 db

Cryptocurrencies Mineable

The Jasminer X44-Q is capable of mining coins based on the Etchash algorithm, including:

• Ethereum Classic (ETC)
• Musicoin (MUSIC)
• Ubiq (UBQ)

Where to Buy the Jasminer X44-Q (7.8 Gh/s)

Purchase Options

The Jasminer X44-Q can be purchased from trusted online resellers. Always choose reliable sources to ensure you get a high-quality product and excellent support.

Purchase Platform Link Note

• Premium Resellers [minerasic.com] Warranty and support available

Jasminer X44-Q (7.8 Gh/s) Maintenance

Device Cleaning and Care

To ensure the longevity and optimal performance of your Jasminer X44-Q, follow a regular maintenance schedule:

1. Regular Cleaning Dust can impair the performance of your miner’s cooling system. Clean the device every 1-2 months, or more often in dusty environments.
   • Method: Use a soft cloth, a brush, or compressed air. Be careful not to damage any internal components.
2. Temperature Monitoring Maintain the device temperature within the range of 0°C to 40°C to prevent overheating and internal damage.
   • Solution: Place the miner in a cool, well-ventilated area. Consider additional cooling solutions if necessary.
3. Fan Inspection Check the fans for proper operation every 3-4 months. If you notice a malfunctioning fan, replace it immediately to avoid overheating.
   • Replacement: Always replace faulty fans promptly.
4. Firmware Updates Keep the firmware updated to ensure your miner operates efficiently and securely.
   • Frequency: Regularly check the miner’s web interface for firmware updates.

Overclocking the Jasminer X44-Q (7.8 Gh/s)

What is Overclocking?

Overclocking involves increasing the miner’s hashrate by boosting its processing frequency. While this can enhance performance, it also increases power consumption and heat output, so it must be done carefully.

Overclocking Procedure

1. Access the miner’s web interface by entering the device’s IP address into your browser.
2. Navigate to the Overclocking section and increase the clock frequency gradually, starting with a 5% increase at a time.
3. Monitor the miner’s temperature and power consumption closely to ensure that they stay within safe limits.

Precautions for Overclocking

• Cooling: Ensure your cooling system can handle the additional heat produced by overclocking.
• Stability Testing: After each overclocking step, test the miner for stability to ensure that it’s functioning properly.

Tips for Optimal Use

1. Initial Setup and Installation
   • Placement: Choose a location with proper ventilation and away from direct heat sources to optimize cooling.
   • Power Supply: Use a high-quality, certified power supply to prevent electrical issues.
2. Troubleshooting Common Issues
   • Connection Issues: If your miner is not connecting to the pool, check the network and IP settings.
   • Hardware Failures: If you notice malfunctioning hardware (e.g., faulty fans or power supply issues), replace the faulty components immediately.
   • Software Errors: Try restarting the device or performing a factory reset if you encounter software errors.
3. Device Security
   • Protection: Use a VPN and firewall to protect your miner from cyberattacks.
   • Security Updates: Ensure that the firmware is always up-to-date to address security vulnerabilities.
4. Periodic Maintenance and Prevention
   • Check cables, connectors, and other critical components to prevent future malfunctions.

The Importance of Maintaining Low Humidity Levels in Mining Rooms

Maintaining an optimal humidity level is crucial to the performance and lifespan of your mining equipment. High humidity can cause corrosion, electrical failures, and overheating in your Jasminer X44-Q.

Risks of High Humidity:

• Corrosion: Moisture can cause internal components to corrode, leading to malfunctions.
• Overheating: Excess moisture can impair cooling efficiency, leading to overheating.
• Electrical Failures: High humidity levels can lead to short circuits and permanent damage to the miner.

Optimal Humidity Control:

• Humidity Monitoring: Use hygrometers to monitor and maintain humidity levels between 40% and 60%.
• Dehumidifiers: In areas with high humidity, use industrial dehumidifiers to regulate moisture levels.
• Ventilation: Proper ventilation ensures continuous air circulation, reducing humidity and promoting cooling.
• Temperature Control: Maintain a constant temperature of 18°C – 25°C to avoid condensation.

The Importance of a Holistic Approach to Choosing an ASIC Miner

When selecting an ASIC miner, it’s important to evaluate all factors that affect profitability:

1. Diversification: The Jasminer X44-Q supports multiple Etchash coins, allowing you to switch between cryptocurrencies based on profitability.
2. Cost of Hardware: Calculate how long it will take to recover your initial investment based on the miner’s hashrate, power consumption, and market conditions.
3. Mining Strategy: Look for ways to reduce energy costs, such as using renewable energy sources (e.g., solar panels).
4. Long-Term Viability: Choose a miner that will remain competitive over time. While ASIC miners may become obsolete as difficulty increases, diversifying across multiple cryptocurrencies can help ensure profitability.

By following these tips, you can optimize your mining strategy, maximize your returns, and ensure that your Jasminer X44-Q remains profitable for the long term.

The Jasminer X44-Q (7.8 Gh/s) is an excellent choice for miners who want to maximize profitability with energy-efficient mining equipment. By adhering to regular maintenance practices, keeping the device cool, and managing humidity levels, you can extend the lifespan of the miner and achieve optimal mining performance. Whether you’re mining Ethereum Classic (ETC), Musicoin (MUSIC), or Ubiq (UBQ), the Jasminer X44-Q is a reliable tool that offers excellent performance for both professional and home miners.

This guide covers all the important aspects of setting up, maintaining, and optimizing your Jasminer X44-Q, ensuring that your mining operations run smoothly and profitably.

Documents / Resources

Jasminer X44-Q Highly Efficient ASIC Miner [pdf] Owner's Manual X44-Q Highly Efficient ASIC Miner, X44-Q, Highly Efficient ASIC Miner, Efficient ASIC Miner, ASIC Miner, Miner

References

• User Manual