Intracom KM-276W Wireless Keyboard
Specifications
- Model: KM-276W
- Compliance: Part 15 of the FCC Rules
- RF Exposure: General RF exposure requirement met
Connecting
Connecting via 2.4 GHz Receiver:
- Insert the receiver
- Remove the wireless receiver located under the mouse’s battery cover
- Plug the receiver into an available USB port on your computer.
- Power the keyboard
- Insert two AAA battery into the keyboard’s battery compartment.
- Press the 2.4G button to switch to 2.4G mode (the indicator light with turn red).
- Power the mouse
- Insert one AA battery into the mouse’s battery compartment.
- Press the switch button at the bottom of the mouse to switch to 2.4G mode (the indicator light with turn white).
Connect via Bluetooth:
- Pair the keyboard
- Press and hold the BT1/BT2 button for 3 seconds until the corresponding indicator light (green /blue) flashes quickly.
- Select MH-Keyboard from the Bluetooth device list.
- Press the button to switch between devices.
- Pair the mouse
- Press the button at the bottom of the mouse until the corresponding light (green for BT1, blue for BT2) flashes.
- Press and hold the button for 3 seconds until the light flashes quickly
- Select MH-Mouse from the Bluetooth device list.
Keyboard function keys
For specifications, please visit manhattanproducts.com.
FCC
REGULATORY STATEMENTS
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of Federal Communications Commission (FCC) Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: reorient or relocate the receiving antenna; increase the separation between the equipment and the receiver; connect the equipment to an outlet on a circuit different from the receiver; or consult the dealer or an experienced radio/TV technician for help.
The frequency band used by this product is 2402 – 2480 MHz. The maximum emitted transmission power is 0.0123 mW E.I.R.P. This device complies with the requirements of CE RED 2014/53/EU. The Declaration of Conformity for is available at:
Warning:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.? These limits are designed to provide reasonable protection against harmful interference in a residential installation.? This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. The device has been evaluated to meet general RF exposure requirement.
CONTACT INFORMATION
- support.manhattanproducts.com/barcode/180788.
- North & South America
- IC Intracom Americas
- 550 Commerce Blvd.
- Oldsmar, FL 34677, USA
- Asia & Africa
- IC Intracom Asia
- 4-F, No. 77, Sec. 1, Xintai 5th Rd.
- Xizhi Dist., New Taipei City 221, Taiwan
- Europe
- IC Intracom Europe
- Löhbacher Str. 7
- D-58553 Halver, Germany
All trademarks and trade names are the property of their respective owners. © IC Intracom. All rights reserved. Manhattan is a trademark of IC Intracom, registered in the U.S. and other countries.
For additional benefits:
- Scan to register your product warranty
- or go to: register.manhattanproducts.com/r/180788.
- Important: Read before use.
FAQs
- Q: What should I do if the device causes interference?
- A: If the device causes interference, try relocating it or adjusting its position to minimize interference with other devices.
- Q: Can I make modifications to the device?
- A: No, changes or modifications not approved by the responsible party may void your authority to operate the equipment.
Documents / Resources
 |
Intracom KM-276W Wireless Keyboard [pdf] Instructions 180788KB, 2ADQY-180788KB, 2ADQY180788KB, KM-276W Wireless Keyboard, Wireless Keyboard, Keyboard |