DTAV4s0 Series

Setting Defrost Times:

Follow this procedure to configure defrost times:

1. On the timer wheel, choose a defrost starting time.
2. Slide the tripper upward that is directly above the desired time. The timer will initiate a 15-minute defrost at the configured time.
3. To increase the duration of the defrost, slide up the trippers that are adjacent to the starting time.NOTE: Each tripper on the time wheel represents 15 minutes. For example, to set a 45-minute to defrost, slide the two trippers adjacent to the starting time.
   NOTE: The AM and PM locations on the wheel represent 6 AM and 6 PM.
4. Repeat steps 1 through 3 as necessary to configure multiple defrost times for a given day

300GR10138

Documents / Resources

INTERMATIC DTAV40 Series Auto-Voltage Defrost Timer [pdf] Instructions DTAV40 Series, Auto-Voltage Defrost Timer, DTAV40 Series Auto-Voltage Defrost Timer

References

• User Manual