inner range PCB Integriti Genetec Plugin Security Controller Instructions

The Genetec CCTV Plugin requires a Windows OS version of Windows
8 or higher to run the integration. Ensure you have the required
Integriti Version License and SDK Version mentioned above for
seamless operation.

Past Releases:

Past releases have specific requirements for the Integriti
Version License, Minimum Installed Integriti Version, and SDK
Version. Make sure to match these requirements based on the release
version you are using.

FAQ:

Q: What are the system requirements for the Genetec CCTV
Plugin?

A: The plugin requires a Windows OS version of Windows 8 or
higher, along with specific Integriti Version License and SDK
Version as mentioned in the manual.

Q: Can I use the plugin with Integriti v24.0 or higher?

A: No, the current release is not compatible with Integriti
v24.0 or higher. Please refer to the manual for compatible
versions.

Q: What issues were resolved in the latest release?

A: The latest release resolved issues related to specific
commands not working correctly and incorrect commands listed for
certain device types.

“`

View Fullscreen

Integriti Genetec Plugin
INTEGRITI GENETEC CCTV INTEGRATION RELEASE NOTES
INNER RANGE recommends that all Inner Range systems be installed & maintained by FACTORY CERTIFIED TECHNICIANS.
For a list of Accredited Dealers in your area refer to the Inner Range Website.
http://www.innerrange.com
1
Inner Range Pty Ltd
ABN 26 007 103 933 1 Millennium Court, Knoxfield, Victoria 3180, Australia
PO Box 9292, Scoresby, Victoria 3179, Australia Telephone: +61 3 9780 4300 Facsimile: +61 3 9753 3499 Email: enquiries@innerrange.com Web: www.innerrange.com

TABLE OF CONTENTS
Integriti Genetec Plugin
Table of Contents
CAPABILITIES ………………………………………………………………………………………………………………….. 4
CURRENT RELEASE …………………………………………………………………………………………………………..5 VERSION 2.4 SEPTEMBER 2024……………………………………………………………………………………………….5 Important Notes …………………………………………………………………………………………………………… 5 Required Integriti Version License …………………………………………………………………………………… 5 Minimum Installed Integriti Version ………………………………………………………………………………… 5 Licensing Requirements …………………………………………………………………………………………………. 5 SDK Version…………………………………………………………………………………………………………………..5 Tested Against ……………………………………………………………………………………………………………… 6 Issues Resolved …………………………………………………………………………………………………………….. 6
PAST RELEASES ……………………………………………………………………………………………………………….7
VERSION 2.3 JULY 2023 ………………………………………………………………………………………………………. 7 Important Notes …………………………………………………………………………………………………………… 7 Required Integriti Version License …………………………………………………………………………………… 7 Minimum Installed Integriti Version ………………………………………………………………………………… 7 Licensing Requirements …………………………………………………………………………………………………. 7 SDK Version…………………………………………………………………………………………………………………..7 Tested Against ……………………………………………………………………………………………………………… 8 New Features………………………………………………………………………………………………………………..8 Feature Updates …………………………………………………………………………………………………………… 8 Issues Resolved …………………………………………………………………………………………………………….. 8
VERSION 2.2 MARCH 2021……………………………………………………………………………………………………9 Important Notes …………………………………………………………………………………………………………… 9 Required Integriti Version License …………………………………………………………………………………… 9 Minimum Installed Integriti Version ………………………………………………………………………………… 9 Licensing Requirements …………………………………………………………………………………………………. 9 SDK Version…………………………………………………………………………………………………………………..9 Tested Against ……………………………………………………………………………………………………………… 9 Issues Resolved …………………………………………………………………………………………………………….. 9
VERSION 2.1 JUNE 2020 ……………………………………………………………………………………………………. 11 Required Integriti Version License …………………………………………………………………………………. 11 Minimum Installed Integriti Version ………………………………………………………………………………. 11 SDK Version…………………………………………………………………………………………………………………11 Tested Against ……………………………………………………………………………………………………………. 11 New Features………………………………………………………………………………………………………………11 Issues Resolved …………………………………………………………………………………………………………… 11
VERSION 2.0 SEPTEMBER 2018……………………………………………………………………………………………..12 Important Notes …………………………………………………………………………………………………………. 12 Required Integriti Version …………………………………………………………………………………………….. 12 SDK Version…………………………………………………………………………………………………………………12 Tested Against ……………………………………………………………………………………………………………. 12 New Features………………………………………………………………………………………………………………12
2

INTEGRITI GENETEC PLUGIN
Feature Updates …………………………………………………………………………………………………………. 12 VERSION 1.7 SEPTEMBER 2017……………………………………………………………………………………………..14
Required Integriti Version …………………………………………………………………………………………….. 14 SDK Version…………………………………………………………………………………………………………………14 Tested Against ……………………………………………………………………………………………………………. 14 Feature Updates …………………………………………………………………………………………………………. 14 VERSION 1.6 JANUARY 2016 ……………………………………………………………………………………………….. 15 Required Integriti Version …………………………………………………………………………………………….. 15 SDK Version…………………………………………………………………………………………………………………15 Tested Against ……………………………………………………………………………………………………………. 15 Feature Updates …………………………………………………………………………………………………………. 15 Issues Resolved …………………………………………………………………………………………………………… 15 VERSION 1.5 SEPTEMBER 2015……………………………………………………………………………………………..16 Required Integriti Version …………………………………………………………………………………………….. 16 SDK Version…………………………………………………………………………………………………………………16 Tested Against ……………………………………………………………………………………………………………. 16 Feature Updates …………………………………………………………………………………………………………. 16 Issues Resolved …………………………………………………………………………………………………………… 16 VERSION 1.4 AUGUST 2015 ………………………………………………………………………………………………… 17 Required Integriti Version …………………………………………………………………………………………….. 17 SDK Version…………………………………………………………………………………………………………………17 SDK Version…………………………………………………………………………………………………………………17 Feature Updates …………………………………………………………………………………………………………. 17
3

INTEGRITI GENETEC PLUGIN

Capabilities

Advanced CCTV Features

Feature

Ver Y/N New

Automatically Load Camera Configuration

64-bit Integration Server Support 18

Show Camera Status

Categorised Review Records

License Plate Recognition

Trigger Inputs on CCTV Event

Control Iris and Focus

Control PTZ Tours

Display Video Frame Times

Show On-Screen Display

Reverse Playback

Step Forward/Backward

Export CCTV Clips

Export CCTV Snapshots

Export Current Frame

Stream Audio With Video

Send Audio to CCTV Camera

INTEGRITI GENETEC PLUGIN
Current Release
Version 2.4 September 2024
Important Notes Genetec Licensing Use of the Integriti Genetec CCTV plugin requires that the Genetec Security Centre license has at least 2 Integriti certificates (part number ‘GSC-1SDK-INNERRANGE-Integriti’) for a connection to be possible. Genetec licensing requires 1 Integriti certificate for each Integriti Integration server instance that will be connecting the Genetec server, and 1 Integriti certificate for each Integriti client that will be streaming video from the Genetec server. Please talk to your Genetec distributor for more details on adding Integriti certificates to a Genetec Security Centre license. Minimum Windows OS Version
The Genetec CCTV Plugin requires a Windows OS version of Windows 8 or higher to run the integration.
Required Integriti Version License Integriti Pro/Infiniti v23 license
Minimum Installed Integriti Version Integriti Pro/Infiniti v22.1 or higher
Licensing Requirements Integriti CCTV Integrations require Integriti Business or Integriti Corporate Software Edition. For Integriti Business, one CCTV License is required per camera to be used in the system. Integriti Business supports 32 Cameras initially, and additional cameras can be added in lots of 8 using the 996921 CCTV – Extra 8 Cameras license. Any unlicensed Cameras will still show up in Integriti; however, they will not be useable. For Integriti Corporate, unlimited cameras are supported with no additional licenses required.
SDK Version Genetec Security Center SDK v5.9
5

INTEGRITI GENETEC PLUGIN
Tested Against Genetec Security Center v5.11.2.0 (2092.13) Issues Resolved
· Connection: Resolved an issue that caused a `Failed’ error code when connecting to Genetec Security Center when running on Integriti v24.0 or higher.
· Video Viewer: The Visual C++ Redistributable for Visual Studio 2010 is now automatically installed if necessary. This resolved an issue where the video viewer did not show video on some versions of Windows.
6

INTEGRITI GENETEC PLUGIN
Past Releases
Version 2.3 July 2023
Important Notes Genetec Licensing Use of the Integriti Genetec CCTV plugin requires that the Genetec Security Centre license has at least 2 Integriti certificates (part number ‘GSC-1SDK-INNERRANGE-Integriti’) for a connection to be possible. Genetec licensing requires 1 Integriti certificate for each Integriti Integration server instance that will be connecting the Genetec server, and 1 Integriti certificate for each Integriti client that will be streaming video from the Genetec server. Please talk to your Genetec distributor for more details on adding Integriti certificates to a Genetec Security Centre license. Minimum Windows OS Version
The Genetec CCTV Plugin requires a Windows OS version of Windows 8 or higher to run the integration.
Required Integriti Version License Integriti Pro/Infiniti v22 license
Minimum Installed Integriti Version Integriti Pro/Infiniti v22.1 or higher Note: This release of the integration is not compatible with Integriti v24.0 or higher.
Licensing Requirements Integriti CCTV Integrations require Integriti Business or Integriti Corporate Software Edition. For Integriti Business, one CCTV License is required per camera to be used in the system. Integriti Business supports 32 Cameras initially, and additional cameras can be added in lots of 8 using the 996921 CCTV – Extra 8 Cameras license. Any unlicensed Cameras will still show up in Integriti; however, they will not be useable. For Integriti Corporate, unlimited cameras are supported with no additional licenses required.
SDK Version Genetec Security Center SDK v5.9
7

INTEGRITI GENETEC PLUGIN
Tested Against Genetec Security Center v5.11.2.0 (2092.13)
New Features · Video Viewer: Added the ability to stream audio if it is enabled for the camera. · Video Export: Added Export Video and Export Current Frame from the video viewer.
Feature Updates · SDK Update: Updated Genetec Security Center SDK to version 5.9. · Connection Details: Added the option to accept a self-signed or otherwise untrusted directory certificate. The expected certificate thumbprint may be specified. · Persisted Connection: More details will now be shown in Integriti when an error occurs logging in to the server. · PTZ: Preset and tour names will now be displayed in the video viewer.
Issues Resolved · Review Events: Resolved an issue that caused an IndexOutOfRangeException login failure when logging in on some server versions. · Video Viewer: Corrected an issue preventing the video viewer from correctly updating based on the camera’s capabilities and PTZ preset and tour names from being displayed.
8

INTEGRITI GENETEC PLUGIN
Version 2.2 March 2021
Important Notes Genetec Licensing Use of the Integriti Genetec CCTV plugin requires that the Genetec Security Centre license has at least 2 Integriti certificates (part number ‘GSC-1SDK-INNERRANGE-Integriti’) for a connection to be possible. Genetec licensing requires 1 Integriti certificate for each Integriti Integration server instance that will be connecting the Genetec server, and 1 Integriti certificate for each Integriti client that will be streaming video from the Genetec server. Please talk to your Genetec distributor for more details on adding Integriti certificates to a Genetec Security Centre license. Minimum Windows OS Version
The Genetec CCTV Plugin requires a Windows OS version of Windows 8 or higher to run the integration.
Required Integriti Version License Integriti Pro/Infiniti v20 license
Minimum Installed Integriti Version Integriti Pro/Infiniti v19.0 or higher
Licensing Requirements Integriti CCTV Integrations require Integriti Business or Integriti Corporate Software Edition. For Integriti Business, one CCTV License is required per camera to be used in the system. Integriti Business supports 32 Cameras initially, and additional cameras can be added in lots of 8 using the 996921 CCTV – Extra 8 Cameras license. Any unlicensed Cameras will still show up in Integriti; however, they will not be useable. For Integriti Corporate, unlimited cameras are supported with no additional licenses required.
SDK Version Genetec SDK v5.7
Tested Against Genetec Security Center V5.9.4.0 (580.32)
Issues Resolved 9

INTEGRITI GENETEC PLUGIN
· Genetec Certificate: The ‘GSC-1SDK-INNERRANGE-Integriti’ Certificate is now correctly used by the Integriti Genetec CCTV integration.
10

INTEGRITI GENETEC PLUGIN
Version 2.1 June 2020
Required Integriti Version License Integriti Pro/Infiniti v19 license
Minimum Installed Integriti Version Integriti Pro/Infiniti v18.0 or higher
SDK Version Genetec SDK v5.7
Tested Against Genetec Security Center V5.9.0.0 (167.90)
New Features · License Plate Recognition: Added support for receiving License Plate Recognition events from supported Cameras. When a license plate is detected by a camera a Review Record will be generating containing the license plate that was recognised, and associated with the source Camera. On Integriti v18 or higher, with the addition of the License Plate Recognition license, the LPR integration is taken a step further, allowing a license plate being recognised to trigger a Card badge at a chosen Integriti Door for the User associated with the license plate. This adds the ability to use a license plate as a Credential in Integriti, with each license plate being associated to the given User as a Card with a format of License Plate. This provides all of the benefits of using Cards in Integriti, including restricting access based on a User’s permissions, access logging, and reporting. The built in license plate recognition is enabled on a per-camera basis, with the automatic card badging only being triggered on enabled Cameras, at a Door or Reader configured in the Camera itself. License Plate events will automatically be logged by default for new and upgrading systems; however the LPR as a Credential functionality needs to be manually enabled. See the Integriti CCTV Manual for details on configuring this feature. · Video Viewer: Added support for retrieving and displaying camera PTZ capabilities.
Issues Resolved Invoke Command: Resolved an issue preventing the `Send Camera to Preset’ and `Run Tour on a Camera’ commands working correctly. Also, resolved an issue where wrong commands were listed for a given device type.
11

INTEGRITI GENETEC PLUGIN
Version 2.0 September 2018
Important Notes
Minimum Windows OS Version The Genetec CCTV Plugin requires a Windows OS version of Windows 8 or higher to run
the integration.
Required Integriti Version Integriti Pro/Infiniti v17.0 or higher
SDK Version Genetec SDK v5.7
Tested Against Genetec Security Center V5.7
New Features · 64-bit Integration: Added support for Integriti’s 64-bit Integration Server and Viewer. This allows for better performance and more memory being available for the plugin to work with. The 64-bit Integration Server/Viewer will be used by default on Integriti v18.1 or higher. On older versions of Integriti the integration will use the previous 32-bit integration. No changes need to be made for upgrading systems to continue to work. · Event Monitoring: Review Records generated from the integration now specify categories specific to the event type. This allows for these Review Records to be easily filtered by the Review Category filter in the Review list in Integriti, as well as making triggers easier to configure. Using the new Review Categories it is possible to filter down to a specific type of event type, for example all Motion events, without the need for a text filter. · Commands: Added ‘Send Camera To PTZ Preset’ command. · Commands: Added ‘Start Ptz Pattern On Camera’ command.
Feature Updates · SDK: Updated to use Genetec SDK v5.7. · Integriti Version: The Genetec integration now requires an Integriti version of 17 or higher. · Event Monitoring: Improved Review messages generated by events occurring in the Genetec system to contain more detail, while making the key information about the event clearer.
12

INTEGRITI GENETEC PLUGIN
· Error/Debug Logging: Improved the logging of errors occurring in the integration to contain more details and increased the number of debug logs that are generated to aid in resolving any issues occurring in the integration.
13

INTEGRITI GENETEC PLUGIN
Version 1.7 September 2017 Required Integriti Version
Integriti Pro/Infiniti v16.0 or higher SDK Version
Genetec SDK v5.2 Tested Against
Genetec Security Centre v5.2 Feature Updates
· Error/Debug Logging: Improved the logging of errors occurring in the integration to contain more details and increased the number of debug logs that are generated to aid in resolving any issues occurring in the integration.
14

INTEGRITI GENETEC PLUGIN
Version 1.6 January 2016 Required Integriti Version
Integriti Pro/Infiniti v4.0 or higher SDK Version
Genetec SDK v5.2 Tested Against
Genetec Security Centre v5.2 Feature Updates
· Configuration: Alphabetised lists of event types in Recorder settings to make individual event types easier to find
· Error/Debug Logging: Improved the logging of errors occurring in the integration to contain more details and increased the number of debug logs that are generated to aid in resolving any issues occurring in the integration.
Issues Resolved · Persisted Connection: Fixed bug resulting in connections to DVRs/NVRs persisting in the background when ‘Maintain Persisted Connection’ was disabled. This would cause the integration to use up an extra certificate for the Integration server, even when the persisted connection wasn’t enabled. · Server Connection: Fixed an issue resulting in old connection settings being used when connecting to the server after the Recorder settings had been changed.
15

INTEGRITI GENETEC PLUGIN
Version 1.5 September 2015 Required Integriti Version
Integriti Pro/Infiniti v4.0 or higher SDK Version
Genetec SDK v5.2 Tested Against
Genetec Security Centre v5.2 Feature Updates
· Error/Debug Logging: Improved the logging of errors occurring in the integration to contain more details and increased the number of debug logs that are generated to aid in resolving any issues occurring in the integration.
Issues Resolved · Persisted connection: Fixed an issue that could cause the event filter from the Recorder configuration to not be applied correctly to the events received in some scenarios. · Persisted connection: Fixed issue that resulted in Camera state monitoring not running if event monitoring was disabled.
16

INTEGRITI GENETEC PLUGIN
Version 1.4 August 2015 Required Integriti Version
Integriti Pro/Infiniti v4.0 or higher SDK Version
Genetec SDK v5.2 SDK Version
Genetec SDK v5.2 Feature Updates
· SDK: Updated to use Genetec SDK v5.2.
17

Documents / Resources

inner range PCB Integriti Genetec Plugin Security Controller [pdf] Instructions
PCB Integriti Genetec Plugin Security Controller, PCB, Integriti Genetec Plugin Security Controller, Genetec Plugin Security Controller, Security Controller

References

User Manual

inner range PCB Integriti Genetec Plugin Security Controller Instructions

PCB Integriti Genetec Plugin Security Controller

Specifications:

Product Usage Instructions:

Capabilities:

Current Release: