inateck BK2007-13 Keyboard
Product Diagram
Bluetooth Pairing
- Step 1: For first-time use, snapping the protective case onto the magnetic strip will cause the keyboard to turn on and enter Bluetooth pairing mode automatically. In future use, please press
to enter Bluetooth pairing mode. The Bluetooth indicator will blink once it enters pairing mode successfully. - Step 2: On the iPad, select Settings>Bluetooth>On, and then “Inateck BK2007-13” will show up in “Other Devices”
- Step 3: Tap “Inateck BK2007-13” to pair it with your iPad and then the Bluetooth indicator will stay solid in seconds, which means that Bluetooth pairing is completed.
Fix Bluetooth Pairing Problems
- Step 1: Go to Settings > Bluetooth, find “Inateck BK2007-13” in My Devices tap the info button
next to it, then tap Forget This Device. If there are multiple pairing records related to the keyboard, please clear all of them. - Step 2: Hold
simultaneously for 3 seconds and then three indicators will blink for 3 times once the factory reset is completed. - Step 3: Pair it with your Inateck BK2007-13.
Shortcut Keys
Common Keyboard Shortcuts
LED Indicator
Restore Factory Defaults
- Hold
simultaneously for 3 seconds and then the three indicators will blink 3 times once the factory reset is completed.
Check Battery Level
- Hold
simultaneously to check the battery level according to the blinking frequency of the red battery indicator.
Charging
- When the battery level is under 20%, the battery indicator will blink in red. Please use the included USB cable to recharge the keyboard in time. The recommended charging voltage are 5V respectively.
- The keyboard will be fully charged in 2 hours. The red battery indicator will stay solid when the keyboard is charging. Once it’s fully charged, the green battery indicator will stay solid.
Sleep Mode
- When BK2007-13 is left idle for 30 minutes, it will enter sleep mode and the Bluetooth connection will be disrupted.
- The connection can be rebuilt with a press of any key.
Product Specification
- Bluetooth Range: 10m
- Charging Time: About 2h
- Continuous Working Time: About 90h
- Operating Temperature: -10° -55°
- Bluetooth Frequency Range: 2402-2480MHz
- Actuation Force: 60± 10g
- Battery Capacity: 250mAh
Packing List
- BK2007-13*1
- Charging Cable *1
- Instruction Manual *1
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the Users, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements.
This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or in conjunction with any other antenna or transmitter.
EU Declaration of Conformity
- Inateck Co., Ltd. hereby declares that this device complies with the Directive 2014/53/EU.
- A copy of the Declaration of Conformity can be accessed at https://www.inateck.de/pages/inateck-euro-compliance.
Battery Safety Warning
This product contains a built-in rechargeable lithium battery. Please observe the following safety precautions: do not dismantle, hit, crush, or expose the battery to fire. If the battery experiences severe swelling, discontinue use immediately. Avoid placing the battery in high-temperature environments, and do not use it if it has been immersed in water. During transportation, do not mix the battery with metallic objects.
Service Center
Europe
- F&M Technology GmbH
- Tel: +49 341 5199 8410 (Working day 8 AM – 4 PM CET)
- Fax: +49 341 5199 8413
- Address: Fraunhoferstraße 7, 04178 Leipzig, Deutschland
North America
- Inateck Technology Inc.
- Tel: +1 (909) 698 7018 (Working day 9 AM – 5 PM PST)
- Address: 2078 Francis St., Unit 14-02, Ontario, CA 91761, USA
F&M Technology GmbH
- For Product and Battery FraunhoferstraRe 7 04179 | einzio Neutschlandi
- Tel: +49 341 5199 8410
- Email: service@inateck.com
- Postal code: 04178
Inateck Technology (UK) Ltd.
- 95 High Street, Office B, Great Missenden, United
- Kingdom, HP16 OAL
- Tel: +44 20 3239 9869
Manufacturer
- Shenzhen Inateck Technology Co., Ltd.
- Address: Suite 2507, Block 11 in Tian An Cloud Park, Bantian
- Street, Longgang District, Shenzhen, Guangdong, China
- Email: product@licheng-tech.com
- Postal code: 518129
Documents / Resources
 |
inateck BK2007-13 Keyboard [pdf] Instruction Manual 2A2T9-BK2007-13, 2A2T9BK200713, bk2007 13, BK2007-13 Keyboard, BK2007-13, Keyboard |