IKEA HACKAS Handle Anthracite
Introduction
- This document provides assembly instructions for the HACKÅS product from IKEA.
Brand Information
IKEA
- Design and Quality
- IKEA of Sweden
Assembly Instructions
Tools Required
- Avoid using a screwdriver. Use a drill and clamp for assembly.
Steps
Step 1
- Secure the piece with a clamp and use a drill with a 5 mm (3/16″) bit to make a hole.
Step 2
- Insert the component labeled “119976” into the drilled hole and secure it by turning clockwise.
Support
- If you have questions during assembly, refer to the IKEA customer service for assistance.
Specifications
| Specification | Details |
|---|---|
| Drill Bit Size | 5 mm (3/16″) |
| Component Code | 119976 |
| Document Date | 2024-09-13 |
| Document Number | AA-2552515-1 |
FAQs
What tools are required for assembly?
A drill and clamp are required. Avoid using a screwdriver.
What should I do if I encounter issues during assembly?
Contact IKEA customer service for assistance.
What size drill bit is needed?
A 5 mm (3/16″) drill bit is required
Documents / Resources
 |
IKEA HACKAS Handle Anthracite [pdf] Installation Guide 119976, AA-2552515-1, HACKAS Handle Anthracite, HACKAS, Handle Anthracite, Anthracite |
