Bluetooth 5.0 Real-time Keeper & Repeater Module
HTG01/F & HTG02/F
Product Description
HTG01/F & HTG02/F are Bluetooth modules with a real-time chip built in that can keep real time running for up to 12 weeks during power loss, which is very convenient for Bluetooth system/network where there is constant need for power on/off.
When a product group mesh network is created, the entire network takes HTG01/F or HTG02/F as the authoritative time. External Bluetooth antenna can be connected for a longer Bluetooth broadcast distance.
App Features
 |
Compatible with EnOcean BLE switches |
 |
Grouping luminaires via mesh network |
 |
Device rmware update over-the-air (OTA) |
 |
Continuous development in progress… |
Hardware Features
 |
Two optional reinforced antenna available |
 |
Bluetooth range extender |
 |
Ability to keep real-time for up to 12 weeks during power loss |
 |
Compact design with two screw holes to be built inside luminaires |
 |
Short-circuit protection |
 |
5-year warranty |
Typical Switch Box Mounting
Bluetooth 5.0 SIG mesh
 for iOS |
 for Android |
Smartphone app for both iOS & Android platform
Web app/platform: www.iot.koolmesh.com
Optional accessory: Reinforced Bluetooth antenna
※Standard version
※Keep up to 12 weeks time during power loss
※Repeater / Bluetooth range extender
※Up to 30m transmission distance
※2 screw holes for mounting
※Reinforced version
※Keep up to 12 weeks time during power loss
※Repeater / Bluetooth range extender
※2 screw holes for mounting
Technical Specifications
| Bluetooth Transceiver | |
| Operation frequency | 2.4 GHz – 2.483 GHz |
| Transmission power | 4 dBm |
| Range (Typical indoor) | 10~30m |
| Protocol | 5.0 SIG Mesh |
| Safety & EMC | |
| EMC standard (EMC) | EN 55015, EN61547, EN 61000-3-2/3-3 |
| Safety standard (LVD) | EN61347-1,EN 61347-2-11 |
| RED | EN 300328, EN 301489-1/-17 |
| Input & Output Characteristics | |
| Operating voltage | 120~277VAC 50/60Hz |
| Environment | |
| Operation temperature | Ta: -20°C ~ +60°C |
| Storage temperature | -40°C ~ 70°C |
| Relative humidity | 10 ~ 90% |
| IP rating | IP20 |
| Insulation | Class II |
Mechanical Structure & Dimensions
HTG01/F
HTG02/F
Wire Preparation
To make or release the wire from the terminal, use a screwdriver to push down the button.
Wiring Diagram
Optional accessory: Reinforced Bluetooth antenna
For some special Applications, customers may need a larger Bluetooth transmission for both smartphone to device and device to device. Thanks to the reinforced Bluetooth antenna (optional 1 or optional 2 to choose from), with it being added to the HTG01/F or HTG02/F, the transmission distance (smartphone to device) enlarges to 20m, the distance of device to device is around 50m.
Additional Information / Documents
- To learn more about detailed product features/functions, please refer to www.hytronik.com/download->knowledge ->Introduction of App Scenes and Product Functions
- Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download ->knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
- Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy
Subject to change without notice.
Edition: 28 Jun. 2021 Ver. A1
Documents / Resources
 |
HYTRONIK HTG01 5.0 Real Time Keeper and Repeater Module [pdf] Owner's Manual HTG01-F, HTG02-F, HTG01 5.0 Real Time Keeper and Repeater Module, 5.0 Real Time Keeper and Repeater Module, Real Time Keeper and Repeater Module, Keeper and Repeater Module, Repeater Module |
 |
HYTRONIK HTG01 5.0 Real Time Keeper and Repeater Module [pdf] Instruction Manual HTG01, HTG02, HTG01 5.0 Real Time Keeper and Repeater Module, 5.0 Real Time Keeper and Repeater Module, Real Time Keeper and Repeater Module, Keeper and Repeater Module, Repeater Module |
