hygger HG-967 Automatic Feeder
Hygger automatic fish feeder is the ideal solution for feeding pond fish while you are away. Please read this manual carefully before use.
Product feature
- Easy to read LCD display with clock
- Up to 6 feeding times per day
- Programmable feeding portion up to 9, each portion 8 seconds
- Manual button allows for instant feeding
- Fish container can be loaded up to 5.SL, 2.3kg fish food
- Two different size feeding screw slots according to feeding demand
- Programmable feeding time and feeding portions
- Waterproof design for outdoor use
- Easy to install and can be fixed on the wooden stone floor or ceramic tile
Attention:
- Do not put flake or power food into the container.
- It is better to clean the container once empty.
- There are two screw slots to correspond with feeding demand. Empty food container before replacing it.
- Do not put your hand into the feed cylinder when it’s running.
- Do not mounted on earth floor.
- It is weather-proof, however, do not drops or immerse the feeder in water.
Control Panel
Factory setting up the feeding time
| Number of meals | Feeding time | Volume |
| 1 | 7:00 | 3 |
| 2 | 12:00 | 3 |
| 3
4 5 6 |
17:00 | 3 |
” -” means feeding time is not programmed; Each feeding time is 8 seconds.
Memory Function
- Memory function enables to restore of previous setting
- LED Indicator Light: The indicator light turns on blue when the device is in manual or automatic feeding. The indicator light keeps flashing when it stops.
lnstallation and accessories
Installation instructions:
- Fix the base on the wooden/stone floor /ceramic tile with screws
- Connect base with fixed tube
- Screw fixed tube with bracket
- Connect it with food container
- Tighten up the feeder cover and feed nozzle
- Connect it with controller
Control process
- Auto feeding once it reach to set time
- The LCD display indicates next feeding time
Main interface
Program Feeding Time & Portion
Time Setting
Time
Press “CLOCK” to view the current time
Clock setting
- Press the “CLOCK”button , and then press “SET UP”button to enter time setting interface. Press “CLOCK” button to set desire hours. Then, press “TIMING” button to set minutes.
- After finishing the settings, press “OK” save it and back to the main interface.
Feeding Time Settings
Press “TIMING” to view the feeding times
Directions to Set Feeding Times:
- Press the “TIMING”button, and then press “SET UP”button to enter feeding time setting page
- Press the “TIMING” button to program the first meal.”- -” indicates no feeding. Once it finish, then press “SET UP” button to set the next feed time
- After finishing the setting, press “OK” save it and back to the main interface.
Feeding times can only be programmed to hour, not minute
Feeding Portion Setting
Press “QUANTITY” to view the feeding portion
Size setting for each meal:
- Press “QUANTITY”, and then press “SET UP” to enter the size setting for each meal;
- Press “QUANTITY” to adjust feeding quantity, up to maximum of 9 settings ( “-” means zero feeding quantity). Press “SET UP”button again to proceed to the next feeding portion setting;
- After finish the setting, press “OK” save it and back to the main interface.
Note: Each portion is automatically set to feed for 8 seconds. For example, two portions will feed for 16 seconds, three portions for 24 seconds and so on.
Manual Feeding
Press “HAND FEED” for anytime feeding you like.
Automatic Feeding Pause Function
- Press “OK” button to pause automatic feeding when its running on automatic feeding. You can see the indicator light flashing. Press “OK” button again to cancel pause.
- Programmed one meal each day, you can see the interface displays “_–” and lasts for one hour after feeding, indicates that the feeding today is finished.
Troubleshooting
Error code shows up, you should unplug the feeder and take out the screw slot and restart.
Contact Information
- E-mail: service@hygger-online.com
- Website: www.hygger-online.com
Documents / Resources
 |
hygger HG-967 Automatic Feeder [pdf] User Manual HG-967, HG-967 Automatic Feeder, Automatic Feeder, Feeder |