HOLMAN Digital Tap Timer CO1605

BATTERY INSTALLATION

1. Hold the Tap Timer with the BATTERY COMPARTMENT facing you
2. Remove the BATTERY  COMPARTMENT tray
3. Connect a 9V alkaline battery to the battery connector
4. Insert the connected battery and push in the BATTERY COMPARTMENT tray

When changing a battery, the Tap Timer will hold the current program if you fit the battery within 2 minutes. When changing the battery, make sure the battery compartment stays dry
Use only 9V alkaline batteries

GLOSSARY

A. UNIVERSAL TAP ADAPTOR
B. TAP CONNECTION
C. UNION NUT
D. LCD DISPLAY
E. CONTROL BUTTONS
F. BATTERY COMPARTMENT
G. CLEAR SCREW-ON COVER
H. SNAP-ON HOSE CONNECTION

INSTALLATION

Make sure the washer is in place, then screw the Digital Tap Timer to the tap. Turn it clockwise (hand tighten only).

There should be no need to use thread seal tape, as long as the tap seals onto the washer

SETTING THE CURRENT TIME

1. Press Undo-Alt until the clock is displayed in the top left corner next to TIME. This means you are in TIME mode
2. Press and the hour will flash
3. Press or to adjust the hour
4. Press to select the minutes
5. Pressor to adjust the minutes
6. Press to select the day (the black box will be flashing)
7. Press to reach the current day. Press to save the day

SETTING THE DURATION

DURATION is the length of time you want the water to run for.

1. Press Undo-Alt until the hour glass is displayed on the left next to DURATION. This means you are in DURATION mode
2. The hour display will be flashing, press or Minus-Circle to adjust the hour
3. Press to select the minutes
4. Press or Minus-Circle to adjust the minutes

SETTING THE WATERING DAYS

DAYS is where you select what day(s) you want to water on.

1. Press Undo-Alt until the calendar is displayed on the left next to DAYS. This means your are in DAYS mode
2. Press and the black box under M will flash
3. Press to select that day, press to deselect that day
4. Press to scroll through the days, press if you need to reselect that day
5. Press Undo-Alt to save the schedule

SETTING THE START TIMES

1. Press Undo-Alt until the alarm clock is displayed in the bottom left corner next to START. This means you are in START mode
2. Start 1 is the time you want your watering to first begin. or to adjust the hour
3. Press then or to adjust the minutes
4. Press Undo-Alt to change to the next start time and repeat steps 2 and 3
5. To turn a start time OFF adjust the HOUR until it reads OFF

MANUAL OPERATION

MANUAL allows you to manually turn on your tap timer and set a watering duration.
This will not effect your automatic schedule

1. Press to begin manual watering. The pre-set time is 10 minutes. This will start automatically unless the duration is changed
2. Manually set the duration time using or
3. Once the watering duration has finished the Tap Timer will automatically end watering and return to the automatic schedule

SUSPENDING OPERATION

Use this feature when you want to temporarily suspend the automatic schedule. This feature is generally used when it has been raining or during winter.

Suspension: Press and the sprinkler off icon will appear.

The schedule is now suspended.

Cancel Suspension: to resume the automatic schedule press .

Manual operation can still be used during suspension.

TROUBLESHOOTING

To stop manual or automatic watering press .

Low battery warning: The battery indicator has 5 levels. 4 levels of battery and 1 flashing bar when the battery is flat. The Tap Timer will not water when the battery is in this mode. We advise to change the battery when it is down to 2 bars to ensure reliable watering.

FUNCTIONS

Press to end manual or automatic watering
Press to scroll through the programming modes
Press to decrease time or eliminate a day
Press to increase time or add a day
Press to select a function
Press to begin manual watering

MAINTENANCE

Remove the battery if the Tap Timer will not be used for a long period of time. The Tap Timer contains an internal filter which has to be removed and cleaned every few months.

TECHNICAL DATA

Max Water Pressure: 600kPa Min Water Pressure: 60kPa
Flow Rate: 19L/min at 200kPa Power Source: 9 volt alkaline battery
Power Consumption: 20 micro amps in standby mode

We recommend registering your new product to ensure we have a copy of your purchase, and to activate an extended warranty. Keep up to date with relevant product information and special offers available through our newsletter.

www.holmanindustries.com.au/product-registration/

We really appreciate having you as a customer, and would like to say thank you for choosing us. Should you have any questions about this product or its operation please call customer service on 1300 716 188

Head Office/Service
11 Walters Drive, Osborne Park WA 6017
Tel: +61 8 9416 9999
Fax: +61 8 9416 9920
support@holmanindustries.com.au
www.holmanindustries.com.au

Documents / Resources

HOLMAN Digital Tap Timer CO1605 [pdf] User Guide HOLMAN, Digital, Tap Timer, CO1605

References

• User Manual