Hexatronic MPB32050-1 Horizontal Marker Peg for Detection
Specifications
- Product Name: Marker Peg/End Stop
- Application: Horizontal Marker Peg for Detection of Duct Ends or Standalone Use
- Material: Hard plastic case with reflector coil and silicone filling compound
- Compatibility: Suitable for ducts with outer diameters of 7, 8, 10, 12, 14, and 16 mm
- Compliance: RoHS and REACH compliant
- Color: Orange
- Detection Frequency: 101.4 kHz
- Range: 0.6-1 m
- Pressure Tightness: 0.5 bar (5 m) when using a cable strap to secure the rubber adapter
Product Usage Instructions
Installation
- Prepare the duct end or desired location for installation.
- If used as a duct end cap, attach the rubber adapters to the marker peg.
- Secure the marker peg in place using suitable closures, manholes, or adapters.
Operation
The marker peg will reflect RF signals at a frequency of 101.4 kHz to indicate the presence of duct ends or specific locations.
Maintenance
Regularly check the marker peg for any damage or displacement. Ensure proper sealing to maintain pressure tightness.
FAQ
- Q: Can the marker peg be used in all weather conditions?
- A: The marker peg is designed to withstand temperatures from -20°C to +50°C and is suitable for various weather conditions.
- Q: How many marker pegs are included in each pack?
- A: Each pack contains 10 marker pegs for your convenience.
Features
- Horizontal RF marker for direct buried installation
- Doubles as a micro duct end cap
- Standard telecom frequency
- Detection ranges up to 2m
- Available with duct adapters for 7, 8, 10, 12, 14 and 16 mm ducts, or standalone
Application
- The marker peg is used to find microduct ends, splices, cable coils or other network elements that need to be easily found.
- The marker peg is normally installed horizontally into the ground and attached to a micro duct end with the enclosed rubber adapters.
- The marker peg can also be used both vertically or horizontally as a stand-alone product for OEM built-in applications.
- A general-purpose version without duct adapters is therefore also available.
- Detection is carried out with a standard frequency of 101,4 kHz.
Design
- The marker peg consists of a hard plastic case. Inside the case, a reflector coil is mounted that reflects RF signals of 101,4 kHz. The reflector coil is sealed by the outer case and a silicone filling compound.
- The peg is normally used together with rubber adapters to double as a duct end cap. It can also be mounted in closures or in manholes.
- The rubber adapters are designed so that they can be cut to fit the ducts. Suitable for ducts with 7, 8, 10, 12, 14, and 16 mm outer diameter.
Product Information
- All materials are RoHS and REACH-compliant
Technical Information
- Product Color Orange
- Conformance RoHSREACH
- Temperature, Installation [°C] -20 to +50
- Temperature, Operation [°C] -20 to +50
- Ordering Information Delivered in packs of 10 pcs.
- Temperature, Storage [°C] -40 to +60
- Technical Notes Detection Frequency: 101,4 kHzRange: 0,6-1 pressure tightness: 0.5 bar (5 m) when using cable strap to securerubber adapter to duct and detector (straps not included)
Technical Details
Detection of micro duct ends in the ground with a horizontal RF detector peg.
Articles 2
|
Article Name |
Color |
Dimensions [mm] | Weight [kg] | Form of Delivery |
|
Marker Peg/End Stop Horizontal, Telecom 101,4kHz Orange, Inc. Glands 7, 8, |
||||
| 10, 12, 14 & 16mm
MPB32050/2 |
Orange | 75 x 17 | 0.04 | 10 pcs/pack |
|
Marker Peg Horizontal, Telecom 101,4kHz Orange, Stand Alone/Built-In |
||||
| MPB32050/1 | Orange | 75 x 17 | 0.03 | 10 pcs/pack |
CONTACT
- 28701-N-MPB32050+
- 2024-09-17 09:33:55 PM
- www.hexatronic.com
- © 2024 Hexatronic Group
Documents / Resources
 |
Hexatronic MPB32050-1 Horizontal Marker Peg for Detection [pdf] Owner's Manual MPB32050-1, MPB32050-1 Horizontal Marker Peg for Detection, Horizontal Marker Peg for Detection, Marker Peg for Detection, Peg for Detection, Detection |
