Installation/User Manual
Smart Plug EU-01
SMART PLUG
Ver:1.0,2023-01
EU-01 Wifi Smart Plug
About the Manual
This manual contains important instructions for the HERF SMART PLUG EU-01 and must be read in its entirety before installing or commissioning the equipment. For safety, only qualified technician, who has received training or has demonstrated skills can install and maintain this EU-01 under the guide of this document.
Other Information
Product information is subject to change without notice. User manual will be updated frequently, please refer to ESTAR official website at https://estarpower.com /for the latest version.
Terminals Introduction
1.1 About Smart Plug
Product series: WiFi Smart plug
Type: Smart switch module
Voltage: 100-240VAC 50/60Hz
Max.Load：16A/3520W
Use method：Plug and play
MCU：BK7132t
Certification：CE/ROHS
Standby power consumption: 0.5W/Hour
1.2 Communication mode
Adopt the 2.4G wireless scheme with the router communication.
Only supports 2.4 GHz WiFi network.
Introduction to product software functions
2.1 APP download and installation
- Scan the following QR code by using the mobile QR code function to download and install the Smart Life APP(for end user）. You can also search for the Smart Life App in the Apple store or the Google paly for download and installation.
2.2 Registration and login
Note: the mobile phone and the smart plug should be on the same 2.4G WiFi, and the Bluetooth should be turned on.
- Open the Smart Life App and Register for your account and log in.
- Make sure the smart plug is mounted on the socket，and the indicator light blinks blue rapidy（twice per seconds）,if not,press and hold the power button on the smart plug for 6seconds until the indicator light blinks rapidly.
- Tap the icon”+”on the top right comer of APP,choose your device type and enter into “Add Device”.
- When the wifi connection page appears, please enter the wifi password of the current phone, and then click Next.Waiting for the distribution network to complete.
- The interface is as follows
Technical parameters
| Model | EU-01 |
| Basic Information | |
| Product series | WiFi Smart plug |
| Type | Smart switch module |
| Voltage | 100-240VAC 50/60Hz |
| Max.Load | 16A/3520W |
| Use method | Plug and play |
| MCU | BK7132t |
| Certification | CE/ROHS |
| Standby power consumption | 0.5W/Hour |
| Appearance | |
| Color | white |
| Dimension | 50*50*80mm |
| Gross weight | 93g |
| Casing material | PC+ABS |
| Features | |
| Functions | Remote control, smart timing/delay/countdown, status feedback,power-off memory, voice control, sharing function, smart scene control, manual switch, power statistics (can count: current, voltage, power, power consumption) |
| voice control | |
| Operating systems | Android & ios |
| Antenna | PCB board with antenna |
| Working Enviroment | |
| Applicable place | Indoor |
| Working temperature | -20°C – 50°C |
| Working humidity | 5%-95% RH，non-condensing |
| Working height | Less than 2000m |
202301 V1.0
info@estarpower.com
www.estarpower.com
Documents / Resources
 |
HERF EU-01 Wifi Smart Plug [pdf] Instruction Manual EU-01 Wifi Smart Plug, EU-01, Wifi Smart Plug, Smart Plug, Plug |