Links to further documents for this series:
Installation guide
HM 2408
LVIT SERIES
Key-Features:
- Sensor with integrated electronics
- Spring loaded rod, protected against falling out
- Housing with outer thread M12
- Measurement ranges up to 20 mm
- Linearity up to ±0.35 %
- Analog output: 0…10 V
- Protection class up to IP65
- Temperature range -25…+85 °C
TECHNICAL DATA
| Measurement range | [mm] | 2 | 5 | 10 | 20 |
| Linearity | [96 ES.] | <±0.5 / optional: <±0.35 | |||
| Output | 0…10 V | ||||
| Supply | [VDC] | 24 ±20 % | |||
| Current consumption (no load) | [W] | <20 | |||
| Load resistance | [kO] | >10 | |||
| Noise | [mVRhis] | <5 | |||
| Cut-off frequency (-3 dB) | [kHz] | 1 | |||
| Connection | cable output, axial, 4 poles (standard length 1 m) or connector output, axial, M12, 4 pins | ||||
| Protection class | IP65 | ||||
| Operating temperature | [°C] | -25…+85 | |||
| Storage temperature | [°C] | -40…+85 | |||
| Temperature coefficient | [% F.S./K] | ±0.04 | |||
| Shock resistance | 200 g, 2 ms | ||||
| Vibration resistance | 10 g, 2…2000 Hz | ||||
| Housing | stainless steel | ||||
| Core | nickel iron alloy | ||||
| Weight (with connector) | [g] | approx. 110 | |||
TECHNICAL DRAWING
Version with cable output
| Measurement range | 2 | 5 | 10 | 20 | |
| Housing length | A | 56.5 | 70.5 | 81.5 | 111.5 |
| Flange length | B | 14 | 26.5 | ||
| Thread length | C | 24 | 38 | 49 | 78.5 |
| Rod inner position | D | 5.5 | 2.5 | ||
| Rod outer position | E | 10 | 12 | 18 | 25.5 |
Version with connector output
| Measurement range | 2 | 5 | 10 | 20 | |
| Housing length | A | 69.5 | 83.5 | 94.5 | 124.5 |
| Flange length | B | 14 | 26.5 | ||
| Thread length | C | 24 | 38 | 49 | 78.5 |
| Rod inner position | D | 5.5 | 2.5 | ||
| Rod outer position | E | 10 | 12 | 18 | 25.5 |
ELECTRICAL CONNECTION
| Function | Cable output | Connector output | Connection cable K4P… |
| +24 VDC | BN | Pin 1 | BN |
| Signal | GN | Pin 2 | WH |
| GNDsupply | GY | Pin 3 | BU |
| GNDsignal | WH | Pin 4 | BK |
| shield | shield | housing | shield |
ORDER CODE
ACCESSORIES
| Cable with connector (female) M12, 4 poles, shielded | |
| K4P2M-S-M12 | 2 m, straight connector |
| K4P5M-S-M12 | 5 m, straight connector |
| K4P10M-S-M12 | 10 m, straight connector |
| K4P2M-SW-M12 | 2 m, angular connector |
| K4P5M-SW-M12 | 5 m, angular connector |
| K4P10M-SW-M12 | 10 m, angular connector |
| Mating connector M12 (female), 5 poles, shielded, for self assembly | |
| D4-G-M12-S | connector straight |
| D4-W-M12-S | connector angular |
Nyckelvägen 7
142 50 SKOGÅS, Sweden
Tel: +46 (0)8 771 02 20
info@hemomatik.se
Subject to change without prior notice.
www.hemomatik.se
WayCon Positionsmesstechnik GmbH
Email: info@waycon.de
Internet: www.waycon.biz
| Headquarters Munich Mehlbeerenstr. 4 82024 Taufkirchen Tel. +49 (0)89 67 97 13-0 Fax +49 (0)89 67 97 13-250 |
Office Cologne Auf der Pehle 1 50321 Brühl Tel. +49 (0)2232 56 79 44 Fax +49 (0)2232 56 79 45 |
Documents / Resources
 |
HEMOMATIK LVIT Series Inductive Sensor Lvit [pdf] Installation Guide LVIT-Serien, HM 2408, LVIT Series Inductive Sensor Lvit, LVIT Series, Inductive Sensor Lvit, Sensor Lvit |
