Hawkeye 99DB 5.8G Sharp Vision 2 FPV Monitor
Specifications
- Model: Hawkeye Litle Pilot Sharp Vision 2
- Screen Size: 7 inches
- Brightness: 1000LUX
- Features: FPV Monitor, DVR, HDMI
FAQs
Q: How do I reset the monitor?
A: To reset the monitor, locate and press the reset button in the settings menu. This will restore the monitor to its default settings.
Q: Can I adjust the brightness of the display?
A: Yes, you can adjust the brightness, contrast, saturation, and other display settings using the control buttons provided on the monitor.
Specifications and Features
|
LED Screen |
Display resolution | 1024×600 |
| Backlight | LED | |
| Brightness | 1000 Lux | |
| Aspect ratio | 4：3 | |
| Response time | 10ms | |
| Color system | PAL/NTSC | |
| Power Supply | Working voltage | DC：3S-6S battery |
| Current | 820MA @3S；410MA @6S | |
| Input | Signal | Video（PAL/NTSC），HDMI |
| Output | Signal | Video |
| DVR | Resolution | D1/VGA/QVGA |
| TF card supported | Max 64G | |
|
Specification |
Packing size | 205mm×130mm×105mm |
| Monitor size | 183mm×122mm×30mm | |
| Gross weight | 0.58kg | |
| 5.8G Sensitivity | -99dB | |
| Matching antenna
interface |
interface | SMA |
Explore a new world!
Features
- Specially designed for aerial photography systems, the Sharp Vision Ⅱ all-in-one monitor has the following features:
- High brightness: 1000 Lux.
- Dual receiver: built-in dual receivers.
- DVR: An integrated DVR black box can run in the background for recording.
- No delay/anti blue screen/anti black screen: the built-in DVR system won’tcause any delay in receiving signal; blue screen or black screen will definitely not occur.
- Auto/manual channel scan: no need for DIP switch.
- HDMI input.
Button Functions:
At the back of the monitor, there are 2 groups of buttons, one for DVR control and the other for display control.
| Functions | |
| UP | Move cursor up |
| DOWN | Move cursor down |
| MENU
(left button) |
Po pup/exit menu/sub menu |
| MODE
(right button) |
Enter/exit video playback mode |
| OK | Confirm selection /play/stop |
| Functions | Shortcut key | |
|
UP |
Move cursor up |
Hiding OSD/ Press 2 seconds for Auto channel search in
FPV |
| DOWN | Move cursor down | Popping up the HELP menu |
| LEFT/ – | Adjustment key(-) | Popping up the former interface |
| Right/+ | Adjustment key(+) | Popping up the next interface |
| OK | Po pup menu/confirm selections | |
Explore a new world! www.cnfpv.com
Note: Four display resource types of this monitor are: FPV interface, DVR interface , External video input interface, and HDMI interface. Use the LETF key(shortcut key ) to switch the interface.
FPV Interface Descriptions
FPV interface is the default boot interface.
Voltage indicator: input voltage value is displayed; Display from 10V to 26 V. When the battery is low, the menu turns red and starts flashing. When the battery is too low, the blue light flashes faster and faster in the lower left corner, and the buzzer alarms. Please replace the battery immediately to avoid damage to the battery. Recording indicator: a red “R” flashes when the DVR is working in the background. Time indicator: monitor running time is displayed. Signal strength indicator: the strength of both the signals received by ANT1 and ANT2 is displayed.
DVR Interface
External video input Interface:
HDMI Interface
HDMI input :480i/p, 576i/p, 720p, 1080i/p.
Display Interface Setting:
Press the OK button to po the menu setting:
| FRQA | SCAN |
| FRQB | A1 5645 |
| FRQADJ | OFF |
| FORMAT | AUTO |
| BRI | 20 |
| CON | 20 |
| SAT | 20 |
| SHARP | 07 |
| GAMA | C0 |
| SPEAKER | ON |
| LIGHT | 20 |
| ZOOM | 16:9 |
| VOLADJ | +0.0V |
| LAN | EN |
| RESET | |
| EXIT |
Frequency Group Selection
You can manually select the desired frequency from 12 groups: A, B, E, F, R, L, J, X, U,l, K, and Z, or select the SCAN option to start the auto search. Dual 5.8G receivers cover 96 channels:
Note: Currently, only data between 4.867G and 6.10 0G is supported）
You can manually input the frequency, The specific operation steps are as follows
Firstly, select ” INPUT ” in the FRQA option, then select the FRQB option, and confirm with “OK” to enter the frequency point input mode. if the current displayed frequency is 5645 and you are preparing to change it to 5665, you can use the buttons “OK”, “UP”, and “DOWN” to select the desired frequency. Press “OK” to select the frequency position, and press “UP” and “DOWN” to select the desired value. After all inputs are completed, press “OK” to confirm.
Note: Currently, only frequencies between 4.867G and 6.100G are supported. If not within this range, the prompt bar will turn red and the setting will not be successful. Please re-enter.
Frequency fine-tuning
| FRQ | RSSI |
| 5635 | 03 |
| 5637 | 03 |
| 5639 | 03 |
| 5641 | 03 |
| 5643 | 03 |
| 5645 | 90 |
| 5647 | 95 |
| 5649 | 03 |
| 5651 | 50 |
| 5653 | 30 |
| 5655 | 03 |
Control buttons: LEFT (-), RIGHT (+). Range， At this time, the frequency points that are similar to the current frequency are displayed. According to the signal strength, you can use the up and down keys to select, and the menu key to confirm the selection.
FORMAT:
- Press the LEFT or RIGHT button to enter the system setting, 3 options are provided: AUTO/ PAL/NTSC. If AUTO is selected, the input video system will be automatically identified. System setting will cause display failure.
Brightness:
- Control buttons: LEFT (-), RIGHT (+).Range: 1-40.
Contrast:
- Control buttons: LEFT (-), RIGHT (+).Range: 1-40.
Saturation:
- Control buttons: LEFT (-), RIGHT (+).Range: 1-40.
Share:
- Control buttons: LEFT (-), RIGHT (+).Range: 1-15.
Latitude:
- Control buttons: LEFT (-), RIGHT (+).Range: C1-C3.
SPEAKER:
- Adjust the SPEAKER, ON/ OFF.
Blacklight:
- Adjust LED light brightness, Auto, High, and Low.
ZOOM:
- Press the LEFT or RIGHT button to enter the system setting, 16:9 / 4:3
VOLADJ:
- Control buttons: LEFT (-), RIGHT (+).Range: -0.5 to +0.5
LED:
- Adjust the power indicator light, ON/ OFF.
Language:
- Control buttons: LEFT (-), RIGHT (+).Options: Chinese/English.
Reset:
- Reset values to default
DVR Interface Descriptions
Note： Please back up your data in the TF card; when the TF card is used for the first time, it will be auto-formatted
Pressing the RIGHT button can switch the FPV interface to DVR interface and pressing the LEFT button can switch back to the FPV interface.
Video Playback
First, switch to the DVR interface, pressing the MODE (RIGHT) button can start video playback. Press UP or DOWN button to select a desired file, then press OK button to start playing it.
| Functions | |
| UP | Move cursor up |
| DOWN | Move cursor down |
| MENU (LEFT) | Po pup/exit menu/sub menu |
| MODE
(RIGHT) |
Enter/exit video playback
mode |
| OK | Confirm selection /play/stop |
DVR can run front-end or back-end. In any interface except the DVR setting and video playback mode, pressing an OK button (middle one of the DVR control group) can start recording in the background, without affecting FPV use.
Recording Settings:
Press the MENU button to select the sub-menu:
Resolution:
D1(720×576（PAL）），720×480（NTSC）),VGA(640×480) QVGA（320×240)
Cycle Recording
If Cycle Recording is selected, the latest videos recorded will cover the earliest ones when the TF card is full. “OFF”: if the Cycle Recording function is closed, video files will not be cut into small segments; If you select 3 min to 10 min, Cycle Recording function is open then; the length of each video segment corresponds to the selected value.
Motion Detection:
If Motion Detection is selected, the DVR will automatically start recording according to its internal algorithm when any motion is detected.
Motion Detection Sensitivity:
Motion Detection Sensitivity can be adjusted by 3 levels: High/Medium/Low; the higher level is selected, the more easily the DVR is triggered to record.
Date Stamp:
Select ON/OFF to decide whether the date and time will be shown at the bottom of the video images.
Image Quality:
Image definition and video file size can be adjusted by 3 levels. Higher imagequality results in higher image definition and larger video file; When resolution D1(720×576（PAL）) is selected, the file sizes of videos recorded at different Image Quality options are as follows:
- Best: 1.7G/h
- Good: 1.2G/h
- Standard: 800M/h
Auto power-up recording:
- Select YES/ON to decide whether videos need to be auto-recorded when powered up.
Advanced Settings:
- Press the MENU button twice will pop up the Advanced Setting options including Format, Date/Time, and Language.
Format:
- Enter Advanced Settings, and select the Format option to format the TF card. In order to optimize the file system, DVR will format the TF card, if it’s used for the first time; Please back up your data in TF Card.
Note: all files stored in the TF card will be deleted after the card is formatted.
Date/Time:
- Enter Advanced Settings → select the Date/Time option → press the UP/DOWN button to select a desired date/time → press the MENU button to exit.
Language:
- Enter Advanced Settings → select Language option → press UP/DOWN button to select a desired language from 8 languages provided → press MENU button to exit.
TV Mode:
- Video output system can be selected and the video input system will be automatically identified. Select the system according to which country you are in. （Keep it in PAL, do not change）
Default Settings:
- This option leads back to the factory default settings.
Quick Access Descriptions
In any mode except the menu setting, Monitor keys can used as shortcuts described as follows:
Interface Switch:
- Pressing the RIGHT/LEFT button can switch between FPV, DVR, external video interfaces, and HDMI interfaces.
Show/Hide Indication Windows:
- In any interface, pressing the UP button (of the display control group) once can hide the indication windows, and pressing UP again can show them again.
Show Help Menu:
- In any interface, pressing a DOWN button (of the display control group) can show the Help menu, pressing DOWN again can make it disappear.
The power indicator light:
- When the system starts, if the power indicator is on, it indicates that the power is on. In any of the FPV, DVR, and external video interfaces， When recording, the LED will flash. When the battery is too low and the system alarms, the LED will flash.
Packing and Accessories
Size and Weight
|
Specification |
Packing size | 205mm×130mm×105mm |
| Gross weight（dual
receiver + DVR） |
0.58kg |
Accessories
|
Accessories |
3.5mm connector cable | 1 |
| 5.8G antenna | 2 | |
| Bandage | 2 |
| 3.5mm cable Interface descriptions | Yellow | Video output |
| White | Video input | |
| Red | Audio output |
FAQs
Not able to search channels automatically:
- Auto channel scan only functions in the FPV interface. In the DVR interface, users should search channels manually.
The video displayed is black-and-white:
- Check whether the camera output is black-and-white (some cameras might automatically shift to black-and-white in low-light conditions)
Can not start after being connected to power:
- First fully charge the battery, and make sure its discharge current at least reaches 1.4 Check whether the battery power is enough.
- Check whether the power source is correctly connected to the positive
No channel can be received:
- Install antennas, and move the monitor close to the 5.8 GHz transmitter.
- Connect the video signal to the transmitter.
- Check whether the channel provided by the transmitter is one of those listed in the channels-able-to-be-received-table; check with other channels
NOTE:
- Check on www.CNfpv.com for new firmware/Manual updates.
For more information please check our YouTube/Facebook/Instagram channel
HawkeyeFPV
Documents / Resources
 |
Hawkeye 99DB 5.8G Sharp Vision 2 FPV Monitor [pdf] User Manual 99DB 5.8G Sharp Vision 2 FPV Monitor, 99DB, 5.8G Sharp Vision 2 FPV Monitor, Vision 2 FPV Monitor, FPV Monitor, Monitor |
