Drill Bit Pro & Drill Bit Pro ULTRA
INSTRUCTIONS FOR USE
The Hammersmith Drill Bit Pro has been designed for drilling materials that cannot be drilled with standard drill bits, i.e. concrete, brick, ceramic, hardened steel, granite, plastic, wood, marble and glass.
ALWAYS READ THE INSTRUCTIONS BEFORE USE!
SAFETY NOTICES
- A backing plate should be used when drilling.
- The drill bits are extremely sharp, handle them carefully.
- NEVER use the Hammersmith Drill Bit Pro with the hammer drill function of your drill. This will damage the drill bits. When drilling masonry and concrete, the Hammersmith Drill Bit Pro are designed to work with the standard function of your drill.
Refer to the table below to ensure that you are using the correct speed, pressure and coolant for the various materials listed.
|
Material |
Pressure | Speed |
Coolant |
| Glass | Light | Medium | Water |
| Brick | Medium | Medium – Low | Water or air |
| Concrete | Medium | Medium – Low | Water or air |
| Steel | Heavy | Medium | Air or oil |
| Aluminium | Medium – Heavy | High | Oil |
| Wood | Medium – Heavy | High | Air |
| Ceramic | Light | Medium | Water |
| Plastic | Medium – Heavy | Medium – Low | Water or air |
| Air = compressed air jet or dry (no coolant) | Oil = machining oil (cutting lubricant, CRC, WD40) | Water = fresh water. TIP: spray water for cooling using a spray bottle while drilling. | |
Made in China
Liability claims against the company Mediashop, which relate to damage (except in the case of injury to life, body or health of a person, so-called personal injuries), material or immaterial in nature, caused by the use or non-use of the information provided or through the use of incorrect and incomplete information provided by third parties is fundamentally excluded, unless it can be proven that Mediashop acted with wilful intent or gross negligence.
Importer
CH: MediaShop AG
Industriering 3 | 9491 Ruggell | Liechtenstein
EU: MediaShop GmbH
Schneiderstraße 1, Top 1 | 2620 Neunkirchen | Austria
Forgalmazó: Telemarketing International Kft.
9028 Győr | Fehérvári út 75. | Hungary
DE | AT | CH: 0800 376 36 06 – Kostenlose Servicehotline
ROW: +423 388 18 00 | CZ: + 420 234 261 900 | SK: + 421 220 990 800
RO: + 40 318 114 000 | HU: + 36 96 961 000
office@mediashop-group.com | www.mediashop.tv
Stand: 10/2021 | M30752 | M30749
Documents / Resources
 |
HAMMERSMITH Drill Bit Pro Universal Drill Bit [pdf] Instructions Drill Bit Pro, Universal Drill Bit, Drill Bit, Universal Bit, Bit, Drill Bit Pro |
