HALO RapidPack SOURCE 200 182Wh Portable Power Station with LCD Display User Manual

YOUR SAFETY IS IMPORTANT TO US.
Please read instructions carefully and utilize the proper precautions before operating this equipment. Save instructions for future reference.

When used correctly, lithiumion rechargeable batteries provide a safe and dependable source of portable power. However, if they are misused or abused, this may result in leakage, burns, fire, or explosion, causing personal injury or damage to other devices.
Misusing or incorrectly connecting your power bank may cause electric shock to users and damage equipment.

Keep your power bank dry and away from moisture, water, and corrosive materials.
Do not expose your power bank to moisture, water, rain, or snow.

Keep your power bank away from heat sources, including open flames, radiators, stoves, ovens, and any other devices that produce heat.
Do not expose to fire or excessive temperature. Do not expose to heat above 212°F (100°C) or incinerate.

In the unlikely event of leakage or explosion use sand or a chemical fire extinguisher.
Your power bank may become warm under extended high power operation. Do not cover, wrap, or otherwise restrict air flow around the jump starter during operation.

Do not disassemble your power bank. There are no user-serviceable parts inside. Incorrect reassembly may result in shock or fire hazard.
Do not drop or subject to strong impacts. Do not operate your power bank if it has received a sharp blow, or has otherwise been damaged in any way.

Do not puncture, crush, or subject to mechanical shock.
Keep away from children and pets. The power bank, along with its accessories are not toys.

PRODUCT MAINTENANCE

WARNING
IF THE JUMP STARTER OVERHEATS, BECOMES SWOLLEN, OR IS DEFORMED IN ANY WAY, IMMEDIATELY STOP USING THE PRODUCT AND CONTACT CUSTOMER SERVICE.

EQUIPMENT CLEANING:

Please make sure that the device is disconnected from all input power and output devices.
Wipe with a clean, dry cloth.
Do not use corrosive cleaners or solvents.
Do not insert metal objects into the ports to clean them as this could cause electrical shock. Blow any debris out with a canned-air type of product.

DISPOSAL/RECYCLING:
Do not put the device and its accessories in the trash can. Items must be properly handled in accordance with local laws and regulations. For additional information, please see www.epa.gov.

WARNING
Cancer and Reproductive Harm
www.P65Warnings.ca.gov

PRODUCT OVERVIEW

Magnetic Wireless 15W Output
LCD Display
Lantern ON/OFF Button
USB-C 60W Input/140W Output
USB-A 18W Outputs
USB-C 20W Output
Power ON/OFF Button
10-Mode LED Lantern
Convenient Carrying Handle

40″ USB-C to USB-C Cable
20W USB-C Adapter

LCD DISPLAY

BATTERY FUEL GAUGE INDICATORS
Each bar presents 5% of the charge capacity.
WIRELESS CHARGING INDICATOR
Displays when wireless charging is in use…
LANTERN INDICATOR
Displays when the lantern is on and in use.

BATTERY PERCENTAGE
Displays the current battery level.
INPUT INDICATOR
When on, this indicates the unit is plugged in and charging.
OUTPUT INDICATOR
When on, this indicates that the unit is charging external devices.

CHARGE YOUR RAPIDPACK SOURCE 200

BEFORE YOU GET STARTED
Fully charge the Rapid Pack Source 200.

Plug the included USB-C to USB-C cable into the USB-C1 Input/Output port.
Connect the USB-C to USB-C cable into the included USB-C wall adapter.

Plug the USB-C wall adapter into a wall outlet. Charging will begin and the LCD display will display the current battery level.

The included wall adapter is rated for 20W and should fully charge in 11 hours.

NOTE: Using a higher wattage adapter (up to 60W) can recharge in as little as 3.5 hrs.* *60W adapter not included.

CHARGING A LAPTOP

Press the Power ON/OFF Button.
Plug the included USB-C to USB-C cable into the USB-C1 Output port (rated for up to 140W output).

Plug the USB-C to USB-C cable to the laptop.

NOTE: The Rapid Pack Source 200 will automatically power off after 30 seconds of inactivity.

CHARGE YOUR DEVICES

USB-A output ports are rated for up to 18W.
USB-C 2 output port is rated for up to 20W.

Connect the appropriate cable to your device.
Plug the cable into the appropriate USB output port.

Press the Power ON/OFF Button to begin charging your device.

NOTE: It is recommended to use charging cables provided by the manufacturer of your devices.

WIRELESS CHARGING

Magnetic wireless charging pad is rated for up to 15W.

Place your wireless compatible device onto the wireless charging pad. The magnetic charging pad will help align your device for a proper connection.
Press the Power ON/OFF to begin charging. The “wireless” icon will display on the LCD display

NOTE: Make sure the device is aligned in the center of the wireless charging surface and that no gaps or obstructions are in between.

Some phone cases may reduce the strength of the magnet to the point that they will prevent the phone from aligning properly. For best results, use a phone case specifically designed for magnetic accessories or remove your case to use the magnetic wireless charging pad.

HOW TO USE THE LANTERN

The LED lantern offers 10 modes with 3 brightness settings for each of its 3 light colors and an Orange SOS mode.

Turn on the lantern by pressing the Lantern Control Button. The “light” icon will display on the LCD display.
To change your light color, press and hold the Lantern Control Button until the color changes. Hold down again to change to the next color – Warm > Bright White > Orange. OR Short press the Lantern Control Button cycle through the light’s brightness levels – High > Medium > Low.

The Orange SOS mode can be accessed by double-pressing the Lantern Control Button. This can be done whether the light is off or in use.

NOTE: The lantern default mode is Warm/Medium.

CAUTION
LOOKING DIRECTLY INTO THE LANTERN CAN RESULT IN MINOR OR MODERATE INJURY.

TROUBLESHOOTING

FOR ALL QUESTIONS RELATED TO SAFETY, WARRANTY OR EXCHANGE REQUESTS, PLEASE CONTACT US.

1-800-255-6061

PRODUCT REGISTRATION
Scan the QR code below to register your product.
For product information and videos, visit HALOPWR.COM

PRODUCT REGISTRATION

ACTIVATE YOUR WARRANTY TODAY
Your HALO Rapid Pack Source 200 has a 90 day warranty from the date of purchase. By registering your warranty, you will help protect your investment and save a record of your purchase with our customer service team.

TECHNICAL SPECIFICATIONS

USB-C1 Input 60W Max

USB-C1 Output 140W Max
USB-C2 Output 20W
USB-A Outputs 18W

Wireless Output 15W
Floodlight Output 50lm
Battery Capacity 199.8 Wh

Operating Temperature
Charge: 32°-95°F (0°-35°C)
Discharge: 32°-95°F (0°-35°C)

Dimensions 5.6 x 3.7 x 3.8 in, (142 x 93 x 96mm)
Weight 2.7 lb. (1240g)

FCC NOTE

COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC RF exposure statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

ALLIANCE CONSUMER GROUP
700 Henrietta Creek Rd, Roanoke, Texas 76262

Toll-Free: 800.255.6061
www.acgbrands.com

TRANSPORTING DANGEROUS GOODS

NOTE: Any changes or modifications of this device could void the warranty.
Fully charge before using
Use original or certified charger or cable
Avoid extreme temperature
Avoid dropping
Do not disassemble
It’s not waterproof, do not expose to liquids
Dispose of batteries and electronic goods in accordance with local regulations
This jump starter meets all legal requirements for the transportation of dangerous goods. According to international standards, if the jump starter is transported by air, it must be transported in accordance with IATA standard packaging. The instructions and labeling requirements of the International Air Transport Association and related declarations must be completed.

Frequently Asked Questions (FAQ)

Q: What is the warranty period for this product?
A: The warranty period for this product is one year from the date of purchase.
Q: Can this product be used outdoors?
A: This product is designed for indoor use only and should not be exposed to outdoor elements.

Q: How do I troubleshoot if the product malfunctions?
A: Refer to the troubleshooting section in the manual for step-by-step instructions. If issues persist, contact customer support for assistance.

Documents / Resources

HALO RapidPack SOURCE 200 182Wh Portable Power Station with LCD Display [pdf] User Manual
HPB-RP200000F, 2BASY-HPBRP200, RapidPack SOURCE 200 182Wh Portable Power Station with LCD Display, RapidPack SOURCE 200, 182Wh Portable Power Station with LCD Display, Portable Power Station with LCD Display, Power Station with LCD Display, LCD Display

References

User Manual

HALO RapidPack SOURCE 200 182Wh Portable Power Station with LCD Display

Product Usage Instructions

SAFETY INSTRUCTIONS