KNX Smart Bridge
“
Product Information
Specifications:
- Product Name: GIRA/KNX Smart Bridge
- Required for KNX usage
- Minimum Software Version: 1.5.5
Product Usage Instructions
Installation:
- Ensure you have a SMART BRIDGE for using KNX.
- Add the SMART BRIDGE to your garden or desired location.
- Ensure the SMART BRIDGE is up to date with at least software
version 1.5.5. - Click on ‘Connect to KNX’.
- Share the Pairing code and IP address with the KNX
integrator.
Working with Integrator:
If you are collaborating with an integrator, provide them with
the following:
- X1 or L1 – Logic Module
- Pairing code from the installation manual
Logic Module Manual:
Ensure that the SMART BRIDGE is connected to the same network as
your phone for proper functionality.
Frequently Asked Questions (FAQ)
Q: Do I need a SMART BRIDGE for using KNX?
A: Yes, a SMART BRIDGE is required for KNX usage.
Q: What is the minimum software version required for the SMART
BRIDGE?
A: The SMART BRIDGE should have at least software version 1.5.5
for proper operation.
Q: How do I connect the SMART BRIDGE to the same network as my
phone?
A: Ensure both the SMART BRIDGE and your phone are connected to
the same Wi-Fi network for seamless operation.
“`
INSTALLATION MANUAL
GIRA/KNX
To use KNX, you need a SMART BRIDGE.
Add a SMART BRIDGE to your garden.
Make sure the SMART BRIDGE is up to date and has at least software version, 1.5.5.
Click on `Connect to KNX’.
Communicate the Pairing code & IP-adres with the KNX integrator
You want to work together with the integrator? Here a list of the things he need:
– X1 or L1 – Logic Module
– Pairing code – Installation manual
LOGIC MODULE
MANUAL
Make sure the SMART BRIDGE is connected to the same network as your phone
Documents / Resources
 |
GIRA KNX Smart Bridge [pdf] Instruction Manual KNX Smart Bridge, KNX, Smart Bridge, Bridge |