S0 Real Time Multisensor
“
Specifications
- LED Charge port
- Screen with Wi-Fi and Cell Caution light display
- Humiture sensor
- Button for device control
- Loudspeaker for audio prompts
Product Usage Instructions
1. Turning on the Device
To turn on the device:
- Long press the device button for 5 seconds.
- You will hear a voice prompt “Welcome to Frigga Smart life”
indicating the device is powered on. - The device will enter automatic network distribution mode.
2. APP Usage
2.1 Downloading the APP
To download the APP:
- Scan the QR code provided or search for “Frigga SmartLife” in
the App Store for iPhone users.
2.2 Registering an Account and Logging In
To register an account and log in:
- Select “Sign Up” and follow the prompts to register an
account. - Agree to the terms and log in with your registered
account.
2.3 Adding Equipment
To add equipment:
- In the app, click on the “+” icon in the upper right corner and
select “Add Device”. - Long press the device button for 5 seconds to enter network
configuration mode. - Follow the voice prompt and on-screen instructions to complete
the network configuration.
2.4 Wifi Manual Network Distribution
To manually configure Wi-Fi network settings:
- Click on the Settings icon.
- Navigate to WiFi Network and select the corresponding network,
then enter the password to complete the configuration.
2.5 Parameter Settings
To adjust device parameters:
- Click on the settings icon to enter the settings interface and
complete the device setup.
FAQ
Q: What should I do if the device indicator shows a red light
flashing?
A: If the red light flashes, it indicates specific statuses such
as a low battery or failed internet connection. Refer to the user
manual for detailed troubleshooting steps.
Q: How do I know if the device is fully charged?
A: The blue light will be continuously on when the device is
fully charged. You can also check the device status on the screen
for confirmation.
“`
S0 Instruction Manual
directory S0 Instruction Manual ……………………………………………………………………………………………………….. 1 1. Product schematic diagram…………………………………………………………………………………………….. 2 2. Screen………………………………………………………………………………………………………………………….. 3
2.1 Screen display………………………………………………………………………………………………………. 3 2.2 Device indicator status ………………………………………………………………………………………….. 3 2.3 Turn on the device………………………………………………………………………………………………… 4 3. APP ……………………………………………………………………………………………………………………………… 4 3.1 Download the APP ……………………………………………………………………………………………….. 4 3.2 Register an account ………………………………………………………………………………………………. 4 3.3 Login …………………………………………………………………………………………………………………… 5 3.4 Add equipment ……………………………………………………………………………………………………. 5 3.5 Wifi manual network distribution………………………………………………………………………… 8 3.6 Parameter Settings…………………………………………………………………………………………..11
1. Product schematic
LED Charge port
Screen
Sensor Button
loudspeaker
2. screen
2.1 Screen display
Wi-Fi
Cell Caution light
Electric quantity Humiture
2.2 Device indicator status
Device status The device is charging Fully charged Wi-Fi network Over threshold Internet connection failed
Indicator status The green light is always on The blue light is always on The blue light flashes The red light 30S flashes once for 10 minutes The red light flashes 5 times
2.3 Turn on the device
Long press 5S to turn on, and there will be a voice prompt Welcome to Frigga Smart life when it is turned on, and enter the automatic network distribution mode
3. APP
3.1 Download the APP
1. Scan the QR code to download (to be added after launch) 2. For iPhone, search for Frigga SmartLife download in the App Store
3.2 Register an account
Select Sign Up and follow the prompts to register an account
3.3 Login
Check the agreement and log in with your registered account
3.4 Add equipment
(1) Click “+” in the upper right corner and select Add Device
After selecting it, you will enter the search device mode, as shown in the image below
(2) Long press the device button 5S to enter the distribution network mode When entering network configuration mode, there will be a voice prompt (Start wifi connection), the wifi icon will flash on the screen, and the indicator light will flash blue (3) The mobile app will display the searched devices, as shown in the figure below
After selecting the device, you will be taken to the configuration interface, as shown in the figure below On this interface, select the corresponding network and enter the password to complete the network configuration
3.5 Wifi manual network distribution
Click the Settings icon
Go to the settings interface and click WiFi Network
On this interface, select the corresponding network and enter the password to complete the network configuration
3.6 Parameter Settings
Click the settings icon to enter the settings interface to complete the device setup
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure Statement To maintain compliance with FCC’S RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm between the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
Documents / Resources
 |
FRIGGA S0 Real Time Multisensor [pdf] Instruction Manual S0, S0 Real Time Multisensor, Real Time Multisensor, Multisensor |