P063 Differential Pressure Transmitter
“
Product Information
Specifications:
- Pressure range: Customizable
- Static pressure: 316L stainless steel diaphragm structure
- Pressure reference: Differential pressure measurement
- Supply & output: Short circuit protection and reverse
polarity protection - Accuracy: High precision
- Temp. drift: Low
- Response time: Fast
- Durability: Excellent shock resistance, vibration
resistance - Ambient temp.: Suitable for various environmental
conditions - Medium temp.: Wide range compatibility
- Storage temp.: Appropriate for storage requirements
- EMC-interference: Resistant
- EMC-immunity: Strong immunity to electromagnetic
compatibility - Insulation resistance: High
- Shock resistance: Reliable protection
- Material: High-quality components
- Max. mounting torque: As per installation guidelines
Product Usage Instructions:
Installation:
- Ensure the mounting surface is clean and flat.
- Connect the transmitter following the provided wiring
diagram. - Apply the recommended mounting torque to secure the transmitter
in place.
Calibration:
Calibrate the transmitter according to the specific pressure
range and accuracy required for your application. Follow the
calibration instructions provided in the manual.
Maintenance:
Regularly inspect the transmitter for any signs of damage or
wear. Clean the diaphragm and surrounding area as needed to ensure
accurate measurements.
FAQs:
Q: Can this transmitter be used in high-pressure
applications?
A: The transmitter can be customized for different pressure
ranges, including high-pressure applications. Ensure to specify
your requirements during the ordering process.
Q: Is the transmitter compatible with corrosive mediums?
A: The materials used in the construction of the transmitter
provide resistance to corrosion. However, it is recommended to
consult the manufacturer for specific compatibility with corrosive
mediums.
“`
H2503-P063
Pressure-P063
P063
www.eyc-tech.com
Differential Pressure Transmitter
| Features |
316L stainless steel diaphragm structure Differential pressure measurement Easy to install Short circuit protection and reverse polarity protection Excellent shock resistance, vibration resistance and electromagnetic compatibility resistance Customization available
| Introduction |
P063 Differential Pressure Transmitter is assembled using an piezoresistive silicon differential pressure sensor filled with oil. The shell is made of stainless steel and has strong corrosion resistance. The two pressure ports are threaded and can be mounted directly on the measuring pipe or connected through the pressure pipe. P063 series have standard voltage/current output options, which can be easily installed and used. The products are widely used in the measurement and control of differential pressure, liquid level and flow in process control, aviation, aerospace, automotive, medical equipment, HVAC, etc.
| Applications |
Equipment support / Scientific experiment / Precision instrument / Water supply and drainage / Power plant differential pressure / Flow
| Specification |
Pressure range Static pressure Pressure reference Supply & output Accuracy Temp. drift Response time Durability Ambient temp. Medium temp. Storage temp. EMC-interference EMC-immunity Insulation resistance Shock resistance Protection Material Max. mounting torque
| Dimension |
H2503-P063
Pressure-P063
www.eyc-tech.com
0 … 16 bar 10MPa(Max.) Differential pressure Supply : DC 16 … 36 V ; Output : 4 … 20 mA 0.5%FS(typ.) 1.5%FS(@-10°C … 70°C <2ms(Up to 90%FS) 106 pressure cycles -10°C … 70°C -10°C … 70°C -40°C … 125°C IEC 61000-6-3 IEC 61000-6-2 100 M/DC 250 V 10 g / 11ms IP65 SUS 304 ( Housing ) / SUS 316L ( Diaphragm ) 25 Nm
Thread Thread
Structure & dimension
Bottom installation
Recommended torque : 15 … 25 Nm
| Ordering Guide |
H2503-P063
Pressure-P063
www.eyc-tech.com
Pressure range
P063 21
Output
1
Power supply Connect thread
0
0
Connector
1
01 : 0.1 bar 02 : 0.2 bar 04 : 0.4 bar 06 : 0.6 bar 11 : 1 bar 13 : 2.5 bar 14 : 4 bar 16 : 6 bar 21 : 10 bar 22 : 16 bar
1 : 4 … 20 mA 0 : DC 16 … 36 V
0 : G 1/4 Inside thread 1 : DIN 43650 W : Option thread
| Additional Option Test Report | For more detailed information please contact us.
ILAC / TAF
YUDEN-TECH CO.,LTD. Calibration Laboratory – ( ILAC / TAF ) Test report. (TAF accreditation : 3032, complying with ISO / IEC 17025 ) TAF has mutual recognition arrangement with ILAC MRA
Project Pressure transmitter
Measurand level or range Gauge pressure : 10 … 7000 kPa Absolute pressure : 20 …170 kPa
ISO 9001
Project
Pressure
Measurand level or range Relative pressure : 6000 kPa Absolute pressure : 1000 kPa Differential pressure : 0 … 500 Pa / 0 … 1000 Pa / 0 … 10000 Pa
Documents / Resources
 |
eyc Tech P063 Differential Pressure Transmitter [pdf] User Guide H2503-P063, Pressure-P063, P063, P063 Differential Pressure Transmitter, P063, Differential Pressure Transmitter, Pressure Transmitter, Transmitter |